• Title/Summary/Keyword: Running test

Search Result 1,039, Processing Time 0.029 seconds

Evaluation and Reduction of Microbiological Hazard of Spoon and Spoon Case Carried by Nursery School Children (어린이집 유아 휴대 수저 및 수저집의 미생물학적 위해 분석 및 저감화)

  • Kim, Jung-Beom;Park, Yong-Bae;Kim, Ki-Cheol;Kim, Dae-Hwan;Kang, Suk-Ho;Lim, Young-Sik;Park, Po-Hyun;Yoon, Mi-Hye;Lee, Jong-Bok
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.40 no.1
    • /
    • pp.116-122
    • /
    • 2011
  • This study was conducted to investigate the microbiological hazard of spoons and their cases carried by nursery school children and to evaluate the reduction effects of washing methods and ultraviolet (UV) treatments against Escherichia coli on the spoon and spoon case. A total of 78 spoons and their cases were sampled to test about total aerobic bacteria, coliform bacteria, Staphylococcus aureus, Bacillus cereus and Salmonella spp. Total aerobic bacteria were detected over 2.7 log CFU/100 $cm^2$ in 20 out of 36 spoons (55.6%), 9 out of 20 zipper-type spoon cases (45.0%) and 13 out of 22 plastic-type spoon cases (59.1%). Coliform bacteria were also detected in 19 out of 36 spoons (52.8%), 14 out of 20 zipper-type spoon cases (70.0%) and 14 out of 22 plastic-type spoon cases (63.6%). The pathogens tested in this study were not found in all samples except for the zipper-type spoon cases which were contaminated with Staph. aureus (2 samples) and B. cereus (3 samples). The results indicated that the sanitary conditions of spoons and their cases should be improved promptly. To evaluate the reduction effects of washing methods and UV treatments against E. coli, the spoons and their cases were treated at different cleaning times with and without soap, and different UV exposure times, respectively. E. coli with initial cell number of 4 log CFU on the spoons and their cases was not detected when they were cleaned at running water for 30 sec after dish sponging with soap for 30 sec. In UV treatments, E. coli with the same level of washing method was not detected after UV exposure for 15 minute in the spoons and their cases. From the results, the washing and UV treatment should be used to control the microbial contamination of spoons and their cases for more than 1 and 15 minutes, respectively.

Correlation of Exercise-Induced Bronchoconstriction to $PC_{20}$ and Maximal Airway Narrowing on the Dose-Response Curve to Methacholine (운동유발성 기관지수축의 정도와 Methacholine 유발시험의 민감도 및 최대기도협착과의 관련성)

  • Lim, Hyung-Suk;Yoon, Kyung-Ae;Koh, Young-Yull
    • Tuberculosis and Respiratory Diseases
    • /
    • v.42 no.2
    • /
    • pp.165-174
    • /
    • 1995
  • Background: Exercise is one of the most common precipitants of acute asthma encountered in clinical practice. The development of airflow limitation that occurs several minutes after vigorous exercise, i. g. exercise-induced bronchoconstriction(EIB), has been shown to be closely correlated with the nonspecific bronchial hyperresponsiveness, which is the hallmark of bronchial asthma. All previous reports that assessed the correlation of EIB to nonspecific bronchial hyperresponsiveness have focused on airway sensitivity($PC_{20}$) to inhaled bronchoconstrictor such as methacholine or histamine. However, maximal airway narrowing(MAN), reflecting the extent to which the airways can narrow, when being exposed to high dose of inhaled stimuli, has not been studied in relation to the degree of EIB. Methods: Fifty-six children with mild asthma(41 boys and 15 girls), aged 6 to 15 years(mean${\pm}$SD, $9.9{\pm}2.5$ years) completed this study. Subjects attended the laboratory on two consecutive days. Each subject performed the high-dose methacholine inhalation test at 4 p.m. on the first day. The dose-response curves were characterized by their position($PC_{20}$) and MAN, which was defined as maximal response plateau(MRP: when two or three data points of the highest concentrations fell within a 5% response range) or the last of the data points(when a plateau could not be measured). On the next day, exercise challenge, free running outdoors for ten minutes, was performed at 9 a.m.. $FEV_1$ was measured at graduated intervals, 3 to 10 minutes apart, until 60 minutes after exercise. Response(the maximal ${\triangle}FEV_1$ from the pre-exercise value) was classified arbitrarily into three groups; no response((-) EIB: ${\triangle}FEV_1$<10%), equivocal response ($({\pm})$EIB:10%<${\triangle}FEV_1$<20%) and definite response($({\pm})$EIB:${\triangle}FEV_1$>20%). Results: 1) When geometric mean $PC_{20}$ of the three groups were compared, $PC_{20}$ of (+) EIB group was significantly lower than that of (-)EIB group. 2) There was a close correlation between $PC_{20}$ and the severity of EIB in the whole group(r=-0.568, p<0.01). 3) Of the total 56 subjects, MRP could be measured in 36 subjects, and the MRP of these subjects correlated fairly with the severity of EIB(r=0.355, p<0.05) 4) The MAN of (+) EIB group was significantly higher than that of (-)EIB group(p<0.01). 5) The MAN correlated well with the severity of EIB in the whole group(r=0.546, p<0.01). Conclusion: The degree of MAN as well as bronchial sensitivity($PC_{20}$) to methacholine is correlated well with the severity of EIB. The results suggest that the two main components of airway hyperresponsiveness may be equally important determinants of exercise reactivity, although the mechanism may be different from each other. The present study also provides further evidence that EIB is a manifestation of the increased airway reactivity characteristic of bronchial asthma.

  • PDF

Analysis of Flexural Behavior of Composite Beam with Steel Fiber Reinforced Ultra High Performance Concrete Deck and Inverted-T Shaped Steel with Tension Softening Behavior (인장연화거동을 고려한 강섬유 보강 초고성능 콘크리트 바닥판과 역T형 강재 합성보의 휨거동 해석)

  • Yoo, Sung-Won;Yang, In-Hwan;Jung, Sang-Hwa
    • Journal of the Korea Concrete Institute
    • /
    • v.27 no.2
    • /
    • pp.185-193
    • /
    • 2015
  • Ultra high performance concrete (UHPC) has been developed to overcome the low tensile strengths and brittleness of conventional concrete. Considering that UHPC, owing to its composition and the use of steel fibers, develops a compressive strength of 180 MPa as well as high stiffness, the top flange of the steel girder may be superfluous in the composite beam combining a slab made of UHPC and the steel girder. In such composite beam, the steel girder takes the form of an inverted-T shaped structure without top flange in which the studs needed for the composition of the steel girder with the UHPC slab are disposed in the web of the steel girder. This study investigates experimentally and analytically the flexural behavior of this new type of composite beam to propose details like stud spacing and slab thickness for further design recommendations. To that goal, eight composite beams with varying stud spacing and slab thickness were fabricated and tested. The test results indicated that stud spacing running from 100 mm to 2 to 3 times the slab thickness can be recommended. In view of the relative characteristic slip limit of Eurocode-4, the results showed that the composite beam developed ductile behavior. Moreover, except for the members with thin slab and large stud spacing, most of the specimens exhibited results different to those predicted by AASHTO LRFD and Eurocode-4 because of the high performance developed by UHPC.

Experiment of Flexural Behavior of Composite Beam with Steel Fiber Reinforced Ultra High Performance Concrete Deck and Inverted-T Steel Girder (강섬유로 보강된 초고성능 콘크리트 바닥판과 역T형 강거더 합성보의 휨거동 실험)

  • Yoo, Sung-Won;Ahn, Young-Sun;Cha, Yeong-Dal;Joh, Chang-Bin
    • Journal of the Korea Concrete Institute
    • /
    • v.26 no.6
    • /
    • pp.761-769
    • /
    • 2014
  • Ultra high performance concrete (UHPC) has been developed to overcome the low strengths and brittleness of conventional concrete. Considering that UHPC, owing to its composition and the use of steel fibers, develops a compressive strength of 180 MPa as well as high stiffness, the top flange of the steel girder may be superfluous in the composite beam combining a slab made of UHPC and the steel girder. In such composite beam, the steel girder takes the form of an inverted-T shaped structure without top flange in which the studs needed for the composition of the steel girder with the UHPC slab are disposed in the web of the steel girder. This study investigates experimentally and analytically the flexural behavior of this new type of composite beam to propose details like stud spacing and slab thickness for further design recommendations. To that goal, eight composite beams with varying stud spacing and slab thickness were fabricated and tested. The test results indicated that stud spacing running from 100 mm to 2 to 3 times the slab thickness can be recommended. In view of the relative characteristic slip limit of Eurocode-4, the results showed that the composite beam developed ductile behavior. Moreover, except for the members with thin slab and large stud spacing, most of the specimens exhibited results different to those predicted by AASHTO LRFD and Eurocode-4 because of the high performance developed by UHPC.

An Analysis on the Knowledge Levels, Attitudes, and Factors Affecting the Choices of Those Who Completed the Education of Persons Conducting Clinical Trial Workers (의약품 임상시험 종사자 교육 이수자의 지식 수준, 태도, 교육 선택 요인 분석)

  • Lee, Yoon Jin;Jang, Hye Yun;Lee, Yu-Mi
    • The Journal of KAIRB
    • /
    • v.3 no.2
    • /
    • pp.19-27
    • /
    • 2021
  • Purpose: This study aimed to analyze the knowledge levels, attitudes, and factors affecting the choices on the education of the participants who completed their education of persons conducting clinical trial workers, and to assess the problems of the current education system for clinical trial workers, leading to improvements. Methods: Clinical trial workers (including principal investigators/subinvestigators, members of the Institutional Review Board [IRB], clinical research coordinators) who were affiliated to one of the 4 university hospitals running their own clinical trial center and IRB in Daegu and completed their education of persons conducting clinical trial workers were the subjects of this study. One hundred seven online questionnaires were answered from 2021-04-02 to 2021-04-17. Descriptive statistics and Pearson correlation analysis were used to analyze the acquired data. Independent t-test and 1-way analysis of variance were used to analyze the differences in the knowledge levels and attitudes following the characteristics of the education participants. Results: The baseline characteristics of the 107 participants were as follows: the majority of the participants were female (72.0%), were in their 30s (36.4%), had a nursing major (29.0%), were clinical research coordinators (63.6%), had never experienced a principal investigator (79.4%), had participated 3 or more educations (58.9%), had completed their maintenance course (55.1%), had 5 or more years of clinical trial experiences (34.6%). The fields on which participants had low levels of objective knowledge were "types and preparations on audits of clinical trials," "regulations on clinical trials (Pharmaceutical Affairs Act, Korea Good Clinical Practice)." The difficulties that the participants faced were on "annual educations" and "lack of information regarding the educations." Factors that showed significant differences in objective knowledge were sex (p=0.02), number of educations (p=0.004), the curriculum of 2020 (p=0.001). Age (p=0.004), having experienced a principal investigator (p=0.006), number of educations (p<0.001), the curriculum of 2020 (p<0.001), clinical trial career (p=0.001) were factors that significantly affected subjective knowledge. Attitudes toward the education were positively correlated with objective knowledge (r=0.20, p=0.04) and subjective knowledge (r=0.32, p=0.001). Major sources through which information on educations was acquired were "institutional notices," and major factors affecting the choices on the education were "when the education took place" and "where the education took place." "Within the affiliated institution," "Online classes (recorded)" and "IRB and review processes" were each the most preferred place, mode, and content of the education. Conclusion: Knowledge levels varied largely among participants who completed their education of persons conducting clinical trial workers, depending on their characteristics such as the number of educations. Participants also complained about their lack of information on educations. The quality of education may be improved if clinical trial organizations are designated as education facilities. Education programs must be developed considering the knowledge level and demand of the participants. Furthermore, as offline classes may be impossible due to pandemics such as the coronavirus disease 2019, the development of diverse and sophisticated online classes is looked forward to.

  • PDF

Activation Evaluation of Radiation Shield Wall (Concrete) in Cyclotron room using the Portable Nclide Analyzer Running Title: Activation Evaluation of Concrete in Cyclotron room (휴대용 핵종분석기를 활용한 사이클로트론실 내 차폐벽 방사화 평가)

  • Kim, Seongcheol;Gwon, Da Yeong;Jeon, Yeoryeong;Han, Jiyoung;Kim, Yongmin
    • The Korean Journal of Nuclear Medicine Technology
    • /
    • v.25 no.2
    • /
    • pp.41-47
    • /
    • 2021
  • Purpose There are many cyclotrons compared to the land area of the Republic of Korea. Because GMP certification is required and the nuclear medicine test does not apply for insurance, the number of examinations for nuclear medicine is decreasing. Therefore, there is a high probability of early decommissioning of the cyclotron. However, we do not unusually perform the radioactivation evaluation on concrete that can be classified as radioactive waste during the decommissioning of the cyclotron. In this study, we aim to confirm the radioactivation in the concrete surface using Handheld Radionuclide Identification Devices (RIDs). Materials and Methods Because there is no cyclotron being decommissioning in the Republic of Korea, it was impossible to perform the coring of concrete for radioactivation analysis. In this study, we used the KIRAMS-13 and analyzed the concrete surface in the target direction in the cyclotron room. After setting the target direction as the center, radionuclides were measured for about five months at thirty points with vertical and horizontal intervals of 30 cm. We used the RIIDEye(Detector: NaI(Tl) detector, manufacturer: Thermo) in this study and set the measurement time per point to one day (24 hours). Results Co-60 and Cs-137 were detected in some measurement points, and we confirmed the radioactivity of Co-60 detected at the most points. As a result, we found that the radioactivity of Co-60 was high in the diagonal direction (from the lower-left direction to the upper right direction) based on the center of the target. However, we think it is impossible to apply the corresponding results to all cyclotrons because we performed the study using only one cyclotron. Conclusion In thirty measurement points, we could confirm the radioactive nuclides and the relative radioactivity using the results of portable nuclides analyzer. Therefore, we expect that we can use the portable nuclides analyzer to select the coring position of concrete during the decommissioning of the cyclotron. Also, if we secure the radioactivation data for several years, we expect to make a more accurate estimate of radioactive waste during the preparation period of decommissioning of the cyclotron.

On the vibration influence to the running power plant facilities when the foundation excavated of the cautious blasting works. (노천굴착에서 발파진동의 크기를 감량 시키기 위한 정밀파실험식)

  • Huh Ginn
    • Explosives and Blasting
    • /
    • v.9 no.1
    • /
    • pp.3-13
    • /
    • 1991
  • The cautious blasting works had been used with emulsion explosion electric M/S delay caps. Drill depth was from 3m to 6m with Crawler Drill ${\phi}70mm$ on the calcalious sand stone (soft -modelate -semi hard Rock). The total numbers of test blast were 88. Scale distance were induced 15.52-60.32. It was applied to propagation Law in blasting vibration as follows. Propagtion Law in Blasting Vibration $V=K(\frac{D}{W^b})^n$ were V : Peak partical velocity(cm/sec) D : Distance between explosion and recording sites(m) W : Maximum charge per delay-period of eight milliseconds or more (kg) K : Ground transmission constant, empirically determind on the Rocks, Explosive and drilling pattern ets. b : Charge exponents n : Reduced exponents where the quantity $\frac{D}{W^b}$ is known as the scale distance. Above equation is worked by the U.S Bureau of Mines to determine peak particle velocity. The propagation Law can be catagorized in three groups. Cubic root Scaling charge per delay Square root Scaling of charge per delay Site-specific Scaling of charge Per delay Plots of peak particle velocity versus distoance were made on log-log coordinates. The data are grouped by test and P.P.V. The linear grouping of the data permits their representation by an equation of the form ; $V=K(\frac{D}{W^{\frac{1}{3}})^{-n}$ The value of K(41 or 124) and n(1.41 or 1.66) were determined for each set of data by the method of least squores. Statistical tests showed that a common slope, n, could be used for all data of a given components. Charge and reduction exponents carried out by multiple regressional analysis. It's divided into under loom over loom distance because the frequency is verified by the distance from blast site. Empirical equation of cautious blasting vibration is as follows. Over 30m ------- under l00m ${\cdots\cdots\cdots}{\;}41(D/sqrt[2]{W})^{-1.41}{\;}{\cdots\cdots\cdots\cdots\cdots}{\;}A$ Over 100m ${\cdots\cdots\cdots\cdots\cdots}{\;}121(D/sqrt[3]{W})^{-1.66}{\;}{\cdots\cdots\cdots\cdots\cdots}{\;}B$ where ; V is peak particle velocity In cm / sec D is distance in m and W, maximLlm charge weight per day in kg K value on the above equation has to be more specified for further understaring about the effect of explosives, Rock strength. And Drilling pattern on the vibration levels, it is necessary to carry out more tests.

  • PDF

One-stop Evaluation Protocol of Ischemic Heart Disease: Myocardial Fusion PET Study (허혈성 심장 질환의 One-stop Evaluation Protocol: Myocardial Fusion PET Study)

  • Kim, Kyong-Mok;Lee, Byung-Wook;Lee, Dong-Wook;Kim, Jeong-Su;Jang, Yeong-Do;Bang, Chan-Seok;Baek, Jong-Hun;Lee, In-Su
    • The Korean Journal of Nuclear Medicine Technology
    • /
    • v.14 no.2
    • /
    • pp.33-37
    • /
    • 2010
  • Purpose: In the early stage of using PET/CT, it was used to damper revision but recently shows that CT with MDCT is commonly used and works well for an anatomical diagnosis. This hospital makes the accuracy and convenience more higher in the diagnosis and evaluate of coronary heart disease through concurrently running myocardial perfusion SPECT examination, myocardial PET examination with FDG, and CT coronary artery CT angiography(coronary CTA) used PET/CT with 64-slice. This report shows protocol and image based on results from about 400 coronary heart disease examinations since having 64 channels PET/CT in July 2007. Materials and Methods: An Equipment for this examination is 64-slice CT and Discovery VCT (DVCT) that is consisted of PET with BGO ($Bi_4Ge_3O_{12}$) scintillation crystal by GE health care. First myocardial perfusion SPECT with pharmacologic stress test to reduce waiting time of a patient and get a quick diagnosis and evaluation, and right after it, myocardial FDG PET examination and coronary CTA run without a break. One-stop evaluation protocol of ischemic heart disease is as follows. 1)Myocardial perfusion SPECT with pharmacologic stress: A patient is injected with $^{99m}Tc$-MIBI 10 mCi and does not have any fatty food for myocardial PET examination and drink natural water with ursodeoxcholic acid 100 mg and we get SPECT image in an hour. 2)Myocardial FDG PET: To reduce blood fatty content and to increase uptake of FDG, we used creative oral glucose load using insulin and Acipimox to according to blood acid content. A patient is injected with $^{18}F$-FDG 5 mCi for reduction of his radiation exposure and we get a gated image an hour later and get delay image when we need. 3) Coronary CTA: The most important point is to control heart rate and to get cooperation of patient's breath. In order to reduce a heart rate of him or her below 65 beats, let him or her take beta blocker 50 mg ~ 200 mg after a consultation with a doctor about it and have breath-practices then have the examination. Right before the examination, we spray isosorbide dinitrate 3 to 5 times to lower tension of bessel wall and to extension a blood wall of a patient. It makes to get better the shape of an anatomy. At filming, a patient is injected CT contrast with high pressure and have enough practices before the examination in order to have no problem. For reduction of his radiation exposure, we have to do ECG-triggered X-ray tube modulation exposure. Results: We evaluate coronary artery stenosis through coronary CTA and study correlation (culprit vessel check) of a decline between stenosis and perfusion from the myocardial perfusion SPECT with pharmacologic stress, coronary CTA, and can check viability of infarction or hibernating myocardium by FDG PET. Conclusion: The examination makes us to set up a direction of remedy (drug treatment, PCI, CABG) because we can estimate of effect from remedy, lesion site and severity. In addition, we have an advantage that it takes just 3 hours and one-stop in that all of process of examinations run in succession and at the same time. Therefore it shows that the method is useful in one stop evaluation of ischemic heart disease.

  • PDF

Studies on the Organo-mercury Residues in Rice Grain -I. Mercury residues in rice seeds treated with organo-mercury fungicide- (수도(水稻)에 처리(處理)된 유기수은제(有機水銀劑)의 잔류성(殘留性)에 관(關)한 연구(硏究) -제1보(第1報) 침지용유기수은제(浸漬用有機水銀劑)로 처리(處理)된 수도종자중(水稻種子中)의 수은잔류량(水銀殘留量)에 관(關)하여-)

  • Lee, Dong-Suk
    • Applied Biological Chemistry
    • /
    • v.8
    • /
    • pp.87-93
    • /
    • 1967
  • 1) For the micro-analysis of mercury in plant materials, the method of Furutani was shown to be the simplest and most efficient way and the recovery of the assay was about 98%. 2) When the rice grain was soaked in 1/1000 diluted solution of organo-mercury fungicide for 8 hours at the end of March, the amounts of mercury residues in the brown rice and unhulled rice were 8.8 to $9.5\;{\mu}g/g$ seeds and 10.1 to $10.7\;{\mu}g/g$ seeds, respectively. 3) By washing the treated rice seeds with running water for three days, tile residual mercury concentration was reduced to 1/4 to 1/5; thus the mercury residues were 1.86 to $1.92\;{\mu}g/g$ for brown rice and 1.96 to $2.93\;{\mu}g/g$ for unhulled rice. 4) The residual mercury was present more in the unhulled rice than in the brown rice, either before or after washing of the treated seeds. 5) Among the different rice varieties, no difference was observed in mercury residues by seed treatment and washing.

  • PDF