• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2833-2838
• /
• 2007

Recently, small hydropower attracts attention because of its clean, renewable and abundant energy resources to develop. However, suitable turbine type is not determined yet in the range of small hydropower and it is necessary to study for the effective turbine type. Moreover, relatively high manufacturing cost by the complex structure of the turbine is the highest barrier for developing the small hydropower turbine. Therefore, a cross-flow turbine is adopted because of its simple structure and high possibility of applying to small hydropower. The purpose of this study is to examine the optimum configuration of nozzle shape to further optimize the cross-flow hydraulic turbine structure and to improve the performance. The results show that pressure on the runner blade in Stage 1 and velocity at nozzle outlet have close relation to the turbine performance.

• Journal of the Ergonomics Society of Korea
• /
• v.20 no.1
• /
• pp.63-72
• /
• 2001

Rearfoot control can be defined as the relative ability of a shoe to limit the amount of subtalar joint pronation immediately following footstrike. A normal amount of pronation provides a means of decreasing peak forces experienced by the leg, but excessive pronation of the foot can be arised its injures. The purpose of this study is to compare amount of pronation according to a difference between medial and later hardness of shoe midsole for better design of running shops. The experiment is examined for 7 running shoes. 8 males. to measure the Achilles tendon angle and rearfoot angle using high speed camera. The results is conducted that the changes of Achilles tendon angle significantly differ at each test shoe with increased running speed. And, a difference between medial and lateral hardness of midsole affects rearfoot motion of runner. The displacements of maximal Achilles tendon angle described a amount of pronation motion is decreased when medial hardness of midsole is large more than lateral.

• Design & Manufacturing
• /
• v.2 no.5
• /
• pp.30-33
• /
• 2008

Injection Molding is the most effective process for mass production of plastic parts. The injection molding process is composed with several steps such as Filling, Packing, Holding, Cooling, Ejecting. Among them, filling and packing process should be considered carefully to improve accuracy of dimension, surface quality of plastic parts. Usually the quality above-mentioned is managed with weight of part after molding on the field. In this paper, a series of experiment for molding automotive front bumper was conducted with cavitity temperature sensor to optimize switch-over time(V-P switching), hot runner vale gate sequence time during filling and packing step for the purpose of uniform quality, weight at every molding. As a result, it was found that it is effective method to use temperature sensor in injection molding for quality control of plastic molding.

• Design & Manufacturing
• /
• v.8 no.1
• /
• pp.40-44
• /
• 2014

As a rotating machine element, plastic gears are more and more widely used in such as industrial machine element, since plastic gear is lighter, higher wear-resistance, and higher vibration absorbing ability than metal gears. When operating plastic parts, tooth breakage and fatigue life shortened due to increasing number of applying load and tooth flank temperature rising, such that accuracy of plastic gears is divided from allowable range to cause vibration and noise. On this study, a internal plastic gears are developed which improved the filling balance molding process by a new injection mold structure. The new mold structure called HR3P(hot runner type 3plate mold). As the result from this studies, we obtained a very accurate roundness internal gears by using design of experiment.

• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.1
• /
• pp.1-8
• /
• 2018

The purpose of this study is to develop a high-strength, high-toughness, thin-walled aluminum shock absorber housing product by applying a high vacuum die casting method to improve internal gas defect and formability. The analysis program dedicated for the casting was used because it was too costly and time-consuming to adopt the gating system design. The final casting plan was designed based on the flow pattern of the material filled into the mold and the result of air pressure and air pocket after the material was completely filled in the mold. Gaty shape was designed as a split type. The runner was designed to have the same shape as the initial inlet curve of the cavity, and the flow of the molten metal was prevented from turbulent flow. The most favorable results were obtained when the injection speed was $V_2=4.0m/s$. Defects on pores were reduced by applying high vacuum level inside the mold.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.10a
• /
• pp.150-153
• /
• 2001

The present work concerns optimal design for the injection molding process of a deflection yoke (coil separator). The optimal design for the injection molding process is developed using design of experiments and finite element analysis. Two design of experiments approaches are applied such as: the design of experiment for mold design and the design the experiments for determination of process parameters. Finite element analyses have been carried out as a design of experiments for mold design: runner system and cooling channel. In order to determine optimal process experiments have been performed for various process conditions with the design of experiments scheduling.

• Journal of the Korean Society of Costume
• /
• v.48
• /
• pp.133-150
• /
• 1999

In future what kind of costume do we wear\ulcorner We can guess it is in advance through movie. Movie is a comnipresent medium and a mode of expression that reflect a distintive feature of the times like fashion. In many case costume design which belongs to a special era is based on the historic costumes but ostume design for future movie depends on the creativity of costume designer and director. Therefore it is interesting to research how costume designer get his/her design concept for future ccostume in movie how he/hse express his/her design concept through his/her costume and can we convince the design comes true practically in future. In this study I analyze the costume design of masterpieces among SF Film: (Metropolis/1926) (2001: A Space Odyssey/1968) (Star Wars/1977) (Blade Runner/1982) (The 5th Element/1977) Because this study is analyzed not through the original article but just through movie it has some limitation in exact materials or color.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.301-304
• /
• 2010

본 논문에서는 다수 캐비티 금형의 러너 내 불균일한 전단분포로 인해 발생되는 충전불균형에 따른 치수정밀도, 기계적 강도 등 물성의 차이가 발생되는 문제점을 해소하기 위해서 수지가 처음 분기되는 2차 러너의 구조에 변화를 주어 다수 캐비티 사출성형에서 충전균형을 위한 러너시스템을 제시하였다. 이 러너시스템은 전단률차이에 의한 즉, 온도가 불균일한 수지의 흐름을 혼합함으로써 수지의 흐름을 균일하게 하여 충전균형을 이루도록 하였다. PP수지를 대상으로 각 캐비티 간 균형충전에 대해 이 러너시스템이 효과가 있는지 검증하기 위해 CAE프로그램(Moldflow)을 이용한 유동해석을 통해 그 효과를 나타내 보았다.

• The KSFM Journal of Fluid Machinery
• /
• v.2 no.2 s.3
• /
• pp.27-31
• /
• 1999

This paper describes the shaft vibration phenomena measured on a pump-turbine of a pumped storage power plant. The pump-turbine runs at a rotational speed of 450 rpm (7.5 Hz). The power output (load) of the pump-turbine is varied from 100 to 300 MW in the generating mode. The magnitude of the shaft vibration highly depends on the power load. The vibration magnitude of the shaft is very high in the middle load zone from 170 to 210 MW, elsewhere the vibration is low. From nitration spectra, it is shown that the frequency of major nitration in that load zone is 2.5 Hz which is approximately $34\%$ of the shaft rotating speed in Hz. This frequency component does not occur below and above that load zone. This subsynchronous vibration is caused by the flow induced disturbance due to spiral vortex flow downstream of the pump-turbine runner. Furthermore, the shaft vibration is highly decreased due to an increased bearing preload.

• 유체기계공업학회:학술대회논문집
• /
• 1998.12a
• /
• pp.166-172
• /
• 1998

This paper describes the shaft vibration phenomena measured on a pump-turbine ofa pumped storage power plant. The pump-turbine runs at a rotational speed of 450 rpm (7.5 Hz). The power output (load) of the pump-turbine was varied from 100 to 300 MW in the generating mode. It was found that the magnitude of the shaft vibration was highly dependent upon the power load. The vibration magnitude of the shaft vibration is very high in the middle load zone from 170 to 210 MW, elsewhere the vibration low. From vibration spectra, it was found that the frequency of major vibration in that load zone was 2.5 Hz which is approximately $34\%$ of the shaft rotating speed in Hz. This frequency component disappeared below and above that load zone. This subsynchronous vibration is caused by the flow induced disturbance due to spiral vortex flow downstream of the pump-turbine runner. Furthermore, it was found that shaft vibration was highly decreased due to the increase of bearing preload.