• 한국해양공학회지
• /
• 제27권4호
• /
• pp.55-61
• /
• 2013

The numerical simulation using LES-WASS-3D is developed to investigate the wave run-up on the revetment along the canal. Interaction of ocean wave, current, and Kelvin wave is investigated on 40 conditions varying the number of ship, cruising direction, and relative cruising location of ships, when a 650TEU container cruises in the canal. The mean wave run-up heights on the revetment are compared for every simulated conditions. The largest height of wave run-up is generated at the C-pair condition and the wave run-up generated at the canal entrance is larger than that at the inside canal. When Kelvin waves is interacted with the current, the mean wave run-up height is increased approximate 10% compared with no current condition.

• 전기학회논문지
• /
• 제57권3호
• /
• pp.409-415
• /
• 2008

This paper proposed a new optimal design method of the electronic ballast with stable run-up current for Metal Halide lamp during the ignition condition. In order to avoid operation in the acoustic resonance frequency band and to supply the optimal ignition current without demage of inverter switching components during the ignition period, the values of the series inductor Ls, the series capacitor Cs, and the parallel capacitor Cp were determined by analysis of characteristics of inverter transfer function depend on Lamp operating power and resistance of ignition condition and steady state operating condition. For the prototype ballast for a 400W Metal Halide Lamp, experimental results are presented in order to validate the proposed method.

• 한국기술혁신학회:학술대회논문집
• /
• 한국기술혁신학회 2004년도 춘계학술대회
• /
• pp.25-36
• /
• 2004

The key objective of this paper is to suggest a pilot model for mobile network interconnection charge calculation by bottom-up long-run incremental costing methodology. Interconnection issues have lately attracted considerable attention by network operators and regulators. However there is no standard by all the network operators' agreement. The costing method is an acute problem because the interconnection charge is directly related to the network operators' revenue. Thus Korea has planned to launch the new interconnection policy based on the current traffic distribution and then we simulate the model in a sample area with virtual data. The results propose objective and reasonable guideline for the mobile network element cost calculation. It can be helpful for calculating price floor or bottom-up long run incremental interconnection charge by regulator.

• Structural Monitoring and Maintenance
• /
• 제2권1호
• /
• pp.49-64
• /
• 2015

This paper presents a method for assessing the risk of wave run-up and overtopping of existing coastal defences and for analysing the probability of failure of the structures under future hydraulic conditions. The recent UK climate projections are employed in the investigations of the influence of changing environments on the long-term performance of sea defences. In order to reduce the risk of wave run-up and overtopping caused by rising sea level and to maintain the present-day allowances for wave run-up height and overtopping discharge, the future necessary increase in crest level of existing structures is investigated. Various critical failure mechanisms are considered for reliability analysis, i.e., erosion of crest by wave overtopping, failure of seaside revetment, and internal erosions within earth sea dykes. The time-dependent reliability of sea dykes is analysed to give probability of failure with time. The results for an example earth dyke section show that the necessary increase in crest level is approximately double of sea level rise to maintain the current allowances. The probability of failure for various failure modes of the earth dyke has a significant increase with time under future hydraulic conditions.

• Journal of Power Electronics
• /
• 제18권6호
• /
• pp.1720-1728
• /
• 2018

This paper proposes a novel soft starting algorithm by using PWM inverter technique to control an amplitude of the motor starting current at a single-phase induction motor (SPIM). Traditional SPIM starting methods such as a Split-Phase, Capacitor-Start, Permanent-Split Capacitor (PSC), Capacitor-Start Capacitor-Run (CSCR), basically cannot control the magnitude of starting current due to the fixed system structures. Therefore, in this paper, a soft starting algorithm based on a proportional resonant (PR) control with a variable and constant frequency is proposed to reduce the inrush current and starting up time. In addition, a transition algorithm for operation modes is devised to generate a constant voltage and constant frequency (CVCF). The validity and effectiveness of the proposed soft starting method and transition algorithm are verified through experimental results.

• 전기전자학회논문지
• /
• 제22권2호
• /
• pp.258-265
• /
• 2018

본 논문은 단상 유도전동기의 기동 시 발생하는 기동전류를 분석하고 이를 저감하기 위한 알고리즘을 제안한다. 일반적으로 단상 유도전동기는 구조적인 특성으로 인해 기동토크를 발생시킬 수 있는 별도의 기동장치가 요구된다. 본 논문에서 사용되고 있는 방법은 커패시터-기동/커패시터-운전 방식이며 타 방식 대비 기동토크가 크고 운전효율이 높은 특성이 있다. 하지만 초기 기동 시 약 5~6배에 해당되는 돌입전류가 발생하며 이로 인한 초저온 냉동고 기동 소자와 주변기기들의 소손 및 수명 저하의 원인이 된다. 기동 시 발생하는 돌입전류를 저감하기 위하여 가상 dq모델 기반의 전류제어 알고리즘을 적용하여 기동 전류를 제한하고, 정격운전에 도달 시 상용전원과 동일한 운전조건으로 전환하기 위한 알고리즘을 실험을 통하여 그 타당성을 검증한다.

• Smart Structures and Systems
• /
• 제9권4호
• /
• pp.303-311
• /
• 2012

The possibility of suppressing critical speeds by using electromagnetic actuators (EMAs) is assessed experimentally in this paper. The system studied is composed of a horizontal flexible shaft supported by two ball bearings at one end and one roller bearing that is located in a squirrel cage at the other end. Four identical EMAs supplied with constant current are utilized. The EMAs associated to the squirrel cage constitutes the hybrid bearing. Results obtained, show that the constant current, when applied to the EMAs, produces a shift of the first critical speed toward lower values. Moreover, the application of constant current for a speed interval around the critical speed enables a smooth run-up or run-down without crossing any resonance.

• 해양환경안전학회지
• /
• 제20권3호
• /
• pp.312-317
• /
• 2014

In this paper, the wave run-up height and depression depth around air-water interface-piercing circular cylinder have been numerically studied. The Reynolds Averaged Navier-Stokes equations (RANS) and continuity equations are solved with Reynolds Stress model (RSM) and volume of fluid (VOF) method as turbulence model and free surface modeling, respectively. A commercial Computational Fluid Dynamics (CFD) software "Star-CCM+" has been used for the current simulations. Various Froude numbers ranged from 0.2 to 1.6 are used to investigate the change of air-water interface structures around the cylinder and experimental data and theoretical values by Bernoulli are compared. The present results showed a good agreement with other studies. Kelvin waves behind the cylinder were generated and its wave lengths are longer as Froude numbers increase and they have good agreement with theoretical values. And its angles are smaller with the increase of Froude numbers.

• 대한토목학회논문집
• /
• 제28권3B호
• /
• pp.345-354
• /
• 2008

본 연구에서는 잠제의 평면배치형상(이안거리, 개구율)에 따라 해빈상을 전파하는 풍파의 처오름 높이 변화특성을 논의하기 위하여, 파 투과성구조물 해빈의 상호간섭을 직접해석할 수 있는 3D-수치모델(LES-WASS-3D; 허와 이, 2007)을 이용하였다. 먼저, 기존의 수리모형 실험치와 본 연구의 계산치를 비교 검토하여 이용한 수치모델의 타당성 및 유효성을 검증한 후, 잠제 2기의 평면배치의 변화에 따른 수치시뮬레이션을 실시하였다. 결과로서 얻어진 잠제 주변의 파고분포 및 상층흐름 특성 등과 관련하여 연안에서의 처오름 높이를 검토한 결과, 처오름 높이 감소에 효율적인 잠제의 이안거리는 $Y/L_i=1.50{\sim}1.75$, 개구율은 $W/L_r=0.50$인 것을 확인하였다.

• Journal of Power Electronics
• /
• 제12권6호
• /
• pp.982-991
• /
• 2012

In this study, a new method has been presented for the detection of broken rotor bar (BRB) faults in inverter driven induction motors controlled via Field Oriented Control (FOC). To this end, a FOC controlled induction motor with a BRB fault was modeled using the Matlab/Simulink program. Experiments were carried out using the prepared simulation model at various loads and operating speeds. The motor current and speeds were monitored for healthy, 1, 2 and 3 BRB faults. The Resampling Based Order Tracking Analysis (RB-OTA) method was applied to the monitored signals. The obtained results were compared by using the classic Fast Fourier Transform (FFT) method. When the obtained results were analyzed via the FFT method no information regarding any faults was determined in the run up or run down regions of the motor and the presented method gave very good results. The reliability of the proposed method was validated with experimental results. The main innovative part of this study is that the RB-OTA method was implemented on the induction motor current signal for detecting BRB faults.