• 한국소음진동공학회논문집
• /
• 제27권1호
• /
• pp.20-27
• /
• 2017

This study investigated the problems in current practice of drive-train resonance analysis procedure and suggested solutions. The first problem is the resonance occurrence at the un-identified resonance point by the current practice, as for a solution the force spectrum analysis for each critical force transmitting component was suggested. The second one is the inaccurate estimation of potential resonance point in eigenfrequency analysis because of the non-consideration about the eigenfrequency dependency on rotor-speed, the fine linearization at each rotor speed point all over operational range was proposed to account for the affection. Lastly the insufficient time for resonance activation under run-up simulation condition was recognized as a problem in resonance load increasing analysis, as an alternative, steady state condition was suggested to estimate the maximum load increasing level.

• Industrial Engineering and Management Systems
• /
• 제10권1호
• /
• pp.34-42
• /
• 2011

Many companies open multiple projects simultaneously due to market trends, which results in a crowding out effect because of limited resources. R&D engineers become overloaded and scheduling of product development is delayed resulting in timing misses and lost sales leads. The company in this case study (Company A), often opens up many projects simultaneously in order to respond to market needs quickly. The engineers are overloaded and, of course, the schedule is delayed. In order to identify problems, Company A began using Dr. Goldratt's Thinking Processes (TP) during new product development (NPD). When the analysis phase of TP was completed, Company A's core problem was identified as "the quantity of kick-off projects." Consequently, new rules and conditions and procedures were proposed for the opening, suspending, stopping, and closing of projects. Finally, the "Future Reality Tree" ensured that the proposed rules, conditions and procedures were set up as an available solution approved for practical application by executives. After a one-year trial run, the results showed that the Project Duration Rate was reduced by 53%, the Project Closed Rate was increased by 140% and the Project on Time Rate was increased from 10% to 68%. The above results give significant evidence of the benefits of the proposed methodology.

• Journal of Magnetics
• /
• 제20권2호
• /
• pp.176-185
• /
• 2015

We present the design optimization of the magnetic pole and slot design options that minimize the cogging torque of permanent-magnet (PM) brushless generators for small wind turbine generators. Most small wind-turbines use direct-driven PM generators which have the characteristics of low speed and high efficiency. Small wind-turbines are usually self-starting and require very simple controls. The cogging torque is an inherent characteristic of PM generators, and is mainly caused by the generator's geometry. The inherent the cogging torque can cause problems during turbine start-up and cut-in in order to start softly and to run a power generator even when there is little wind power during turbine start-up. Thus, to improve the operation of small turbines, it is important to minimize the cogging torque. To determine the effects of the cogging torque reductions, we adjust the slot opening width, slot skewing, mounting method of magnets, magnet shape, and the opening and combinations of different numbers of slots per pole. Of these different methods, we combine the methods and optimized the design variables for the most significant design options affecting the cogging torque. Finally, we apply to the target design model and compare FEA simulation and measured results to validate the design optimization.

• Geomechanics and Engineering
• /
• 제10권4호
• /
• pp.471-526
• /
• 2016

In order to investigate water flow characteristics after inrushing in process of karst tunnel excavation, numerical simulations for five case studies of water inrush from the tunnel floor are carried out by using the FLUENT software on the background of Qiyueshan high risk karst tunnel. Firstly, the velocity-distance curves and pressure-distance curves are drawn by selecting a series of probing lines in a plane. Then, the variation characteristics of velocity and pressure are analyzed and the respective optimized escape routes are made. Finally, water flow characteristics after inrushing from the tunnel floor are discussed and summarized by comparing case studies under the conditions of different water-inrush positions and excavation situations. The results show that: (1) Tunnel constructors should first move to the tunnel side wall and then escape quickly when water inrush happens. (2) Tunnel constructors must not stay at the intersection area of the cross passage and tunnels when escaping. (3) When water inrush from floor happens in the left tunnel, if tunnel constructors meet the cross passage during escaping, they should pass through it rapidly, turn to the right tunnel and run to the entrance. (4) When water inrush from floor happens in the left tunnel, if there is not enough time to escape, tunnel constructors can run to the trolley and other equipment in the vicinity of the right tunnel working face. In addition, some rescuing equipment can be set up at the high location of the cross passage. (5) When water inrush from floor happens in the cross passage, tunnel constructors should move to the tunnel side wall quickly, turn to the tunnel without water inrush and run to the entrance. (6) When water inrush from floor happens in the cross passage, if there is not enough time to escape, tunnel constructors can run to the trolley and other equipment near by the left or the right tunnel working face. The results are of important practical significance and engineering value to ensure the safety of tunnel construction.

• 분석과학
• /
• 제28권5호
• /
• pp.309-316
• /
• 2015

본 연구에서는 ICP-MS의 혈장 중 극미량의 납 분석법을 검증하기 위하여 Class 1,000 이내의 환경조건을 확보한 후 특이성, 일내 및 일간 정확도, 정밀도, 검정곡선 등을 확인하였다. 청정실의 부유 분진량을 측정한 결과, 0.3 µm 크기는 0.3~62개, 0.5 µm 크기는 0.0~28.3 개로 총 부유분진량이 최대 90.3개로 요구 환경에 부합하였다. 우태아 혈청 공시료로 조제한 시료의 MDL (Method detection limit)은 1.77 ng/L이고, LOQ (Limit of quantification)값은 5.55 ng/L 이었다. 검정곡선은 y=1.09×10⁻³ x+4.88×10⁻²이었고, 상관계수 r=0.9999이었다. 분석법 확립을 위한 특이성, 일내 및 일간 정확성, 정밀성, 그리고 검정곡선을 확인한 결과 50 ng/L 이상에서 분석법 확인 기준에 적합하였다. 이를 토대로 분석한 일반인의 혈장 중 납 농도 평균은 55.4 ng/L 이었으며, 현직 근로자는 440 ng/L 이었고, 퇴직 근로자는 132 ng/L 이었다.

• KDI Journal of Economic Policy
• /
• 제32권4호
• /
• pp.35-73
• /
• 2010

본고는 자산가격의 변동에 따른 민간소비의 동태적 반응을 분석한다. 오차수정모형에 기초한 분석 결과, 민간소비는 자산가격의 변화에 영향을 받지만 2년 정도의 기간이 경과할 경우 총소득에 상응하는 장기균형수준으로 수렴할 가능성이 높게 나타난다. 이러한 민간소비의 조정은 일시적인 소비불균형을 의미하는 공적분오차가 장기소비증가율에 대해 예측력을 가짐을 시사하는데, 최대 3년 정도의 장기소비증가율에 대해 예측력이 있음을 확인할 수 있다. 한편, 민간소비에 대한 영향은 주식가격보다는 주택가격이 상대적으로 더 크고 유의하게 관찰된다. 또한 경기순환을 고려할 경우 소득 및 자산가격의 변화에 대한 민간소비의 단기적인 반응은 경기수축기가 경기확장기보다 크게 추정되었다. 본고에서는 민간소비에 대한 자산가격의 영향과 더불어 수량요인까지 함께 고려한 자산의 변화가 민간소비에 미치는 영향도 구분하여 분석하였다. 분석 결과, 자산의 경우는 장기에서도 총소득과 함께 민간소비에 대해 유의한 설명력을 보인다. 한편, 전체 부를 인적요소인 노동소득과 자산으로 구분하여 자산의 변화에 따른 민간소비의 변화를 추정하였는데, 자산에 대한 소비의 장기탄력성은 노동소득을 고려한 경우가 총소득을 통제한 경우에 비해 높게 나왔다. 노동소득을 고려한 경우 자산에 대한 한계소비성향은 2% 정도로 추정된다. 이는 1,000원의 자산증가에 대해 20원 정도의 소비증대 효과가 있음을 시사한다.

• Nuclear Engineering and Technology
• /
• 제50권3호
• /
• pp.356-367
• /
• 2018

A series of tests dedicated to station blackout (SBO) accident scenarios have been recently performed at the $Prim{\ddot{a}}rkreislauf-Versuchsanlage$ (primary coolant loop test facility; PKL) facility in the framework of the OECD/NEA PKL-3 project. These investigations address current safety issues related to beyond design basis accident transients with significant core heat up. This work presents a detailed analysis using the best estimate thermal-hydraulic code TRACE (v5.0 Patch4) of different SBO scenarios conducted at the PKL facility; failures of high- and low-pressure safety injection systems together with steam generator (SG) feedwater supply are considered, thus calling for adequate accident management actions and timely implementation of alternative emergency cooling procedures to prevent core meltdown. The presented analysis evaluates the capability of the applied TRACE model of the PKL facility to correctly capture the sequences of events in the different SBO scenarios, namely the SBO tests H2.1, H2.2 run 1 and H2.2 run 2, including symmetric or asymmetric secondary side depressurization, primary side depressurization, accumulator (ACC) injection in the cold legs and secondary side feeding with mobile pump and/or primary side emergency core coolant injection from the fuel pool cooling pump. This study is focused specifically on the prediction of the core exit temperature, which drives the execution of the most relevant accident management actions. This work presents, in particular, the key improvements made to the TRACE model that helped to improve the code predictions, including the modeling of dynamical heat losses, the nodalization of SGs' heat exchanger tubes and the ACCs. Another relevant aspect of this work is to evaluate how well the model simulations of the three different scenarios qualitatively and quantitatively capture the trends and results exhibited by the actual experiments. For instance, how the number of SGs considered for secondary side depressurization affects the heat transfer from primary side; how the discharge capacity of the pressurizer relief valve affects the dynamics of the transient; how ACC initial pressure and nitrogen release affect the grace time between ACC injection and subsequent core heat up; and how well the alternative feeding modes of the secondary and/or primary side with mobile injection pumps affect core quenching and ensure stable long-term core cooling under controlled boiling conditions.

• 한국소음진동공학회논문집
• /
• 제18권10호
• /
• pp.1014-1023
• /
• 2008

Subway electric trains need to be faster for accommodation of long distance passengers. The faster run of the existing trains results in deterioration of ride quality due to noise and vibration. To reduce the noise and vibration of the electric train, a running test of the electric train was performed and an ADAMS/Rail model was set up to verify the running test results. The experimental results show that the sources of the cabin noise and vibration basically comes from the irregularity of the railroad track and the deterioration of the connection part between cabin and bogie. Consequently for mitigation of noise and vibration of the electric train, the redesign of the center pivot with softer stiffness and the minimization of rail irregularity are necessary. the frequent maintenance of the train will lead to better comport.

• 제어로봇시스템학회논문지
• /
• 제10권3호
• /
• pp.232-238
• /
• 2004

The brake system of a high-speed train has a crucial role for the safety of human mass transportation. However, it is hard to acquire design parameters of the brake system in the design step of the new high-speed train. In this paper, we build a HILS (Hardware In-the- Loop Simulation) system for the brake system of the Korea High-Speed Train (KHST) that is supposed to run up to 350 km/h, and analyze the characteristics of the brake system of the KHST (composed of 7 cars) via real-time simulations. In the HILS system that is built using a DSP board of dSPACE, the dynamics of the 7 car bodies and several bogies and characteristics of springs and dampers of connection devices between cars are considered separately. Simulation results show that the designed brake system of the KHST is valid and satisfies design specifications.

• 한국해양공학회지
• /
• 제11권2호
• /
• pp.122-130
• /
• 1997

Coastal diaster induced by waves and countermeasures were investigated in the viewpoint of reduction of overtopping rate with enviroment in fishing port. The reduction method of wave overtopping rate using ecosystem control structures was proposed and studied on the efficiency by hydraulic and numerical experiments. The estimation models on wave overtopping rate was proposed after comparing previous models with dimensional analysis and experimental results. Control function o fwave overtopping by use of ecosystem controlstructures was simulated and discussed with combining wave shoaling-dissipation-breaking deformation model around ecosystem control structures and newly proposed calculation model for wave overtopping rate. Feasiblilty of ecosystem control structures could be confirmed for reduction of wave overtopping and fisheries-based multipurpose development of coastal zone.