• 대한조선학회논문집
• /
• 제56권4호
• /
• pp.343-351
• /
• 2019

Green water impact may sometimes cause some structure damages on ship's bow deck. Prediction of proper design pressure against the green water impact is an essential task to prevent the possible damages on bow deck. This paper presents a computational method of the bow deck's design pressure against the green water impact. Large heave and pitch motions of ship are calculated by the time domain nonlinear strip method. Green water flow and pressure on bow deck are simulated by the predictor-corrector second kind upstream finite difference method. This green water simulation method is based on the shallow water wave equations expanded for moving bottom conditions. For various kind of ships such as container ship, VLCC, oil tanker and bulk carrier, the green water design pressures on bow deck are computed and discussed. Also, the obtained results of design pressure on bow deck are compared with those of the classification society rules and discussed.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2005년도 특별논문집
• /
• pp.113-126
• /
• 2005

This paper describes introductory remarks on risk management and risk-based design for ships and offshore installations with potential hazards. Clients' requirements on safety and performance was related to the risk management and risk-based design. A general procedure for risk-based design was also suggested with each step explained in detail. Various risk-based design approaches were emphasized with their needs and methodological characteristics taken into account. Related rules, standards, and regulations were summarized. The last part included recommendations for Korean ship building industries about the risk management and risk-based design.

• 대한조선학회논문집
• /
• 제31권4호
• /
• pp.1-7
• /
• 1994

본 논문은 1993년 대한조선학회 논문집(제30권 제4호)에 제출했던 논문인 "선급 강선규칙의 설계 파랑하중 산식 개발(I)" 에 이은 후속편이다. 한국 선급에 입급된 다양한 선종의 17척 선박을 선정하여 잘 알려진 Strip Theory를 이용한 선박의 내항 성능을 계산하고 단기예측과 장기예측의 통계해석을 수행하였다. 이의 결과들을 가지고 선박의 초기설계시 이용 가능한 주요 요목들(선박의 길이, 폭, 깊이, 흘수 등)만을 이용하여 선형 회귀 분석법을 통하여 설계자들이 이용 가능하도록 파랑하중에 관한 설계산식을 개발하였다. (I)편에 이어 본 논문에서는 첫째, 만재흘수선 상부 및 노출 갑판에 작용하는 파랑 압력에 관한 설계 산식을 제안하였으며 둘째, 선체 임의의 위치에서 사용할 병진운동 가속도와 회전 운동 가속도의 설계 산식을 제안하고 다른 선급 규칙과 비교하였으며, 마지막으로 선체 탱크내에 액체화물이나 건화물이 적재되었을 경우 요구되는 국부구조 설계 하중에 대한 산식을 제안하였다.

• 대한조선학회논문집
• /
• 제56권2호
• /
• pp.135-142
• /
• 2019

Ice accretions on the ship equipment and areas are the most common issues for vessels operating in cold climate and ice-covered waters and it has effect on the vessel safety and operability of equipment and systems, thus ship machineries and structures exposed to low temperature environments should satisfy the winterization requirements specified in ice class rules. The main objective of this study is to review the state-of-the-art of winterization trend for vessels navigating in ice-covered waters. The hazard of icing and how ice accretions affect operations and safety are investigated firstly, and then winterized notations for each classification are summarized. In addition, winterization methods currently used in vessels operating in ice-covered waters are investigated for a better understanding of effective approach and its application. This information will provide a framework for future winterization issues to mitigate the ice accretion phenomena.

• Journal of Ship and Ocean Technology
• /
• 제12권1호
• /
• pp.45-56
• /
• 2008

Recently, International Association Classification Societies (IACS) has adopted the Common Structural Rules (CSR) for Bulk Carriers and Tankers, which specifies the requirement associated with the ultimate strength of hull girder structure. The theoretical background and the results of verification study are neither well summarized nor released. Furthermore, the requirement is not a form of deterministic formula but a form of program in which source code is not disclosed. The reliability of the non-linear structural analysis program is verified through the comparison with the results of the analysis and the model test. Then, the reliability of the ultimate strength requirement in CSR is checked by comparing with the results of rigorous non-linear analysis.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2015년도 특별논문집
• /
• pp.46-49
• /
• 2015

Common Structural Rules (CSR) about bulk carriers and double-hull oil tankers of International Association of Classification Societies (IACS) has been applied to ships contracted for construction since April 2006. By unifying each society's rules, the difference of opinion in the between shipyard and ship owners, classification was reduced, and CSR has been evaluated by rules the safety structure more enhanced. However, The CSR about the bulk carriers and double hull oil tankers, important design content standards, such as the local scantling calculation, static/dynamic load case and corrosion margin and etc., are different. Therefore in order to combine the CSR, the Harmonized CSR for bulk carriers and double hull oil tankers (H-CSR) was issued on 1, January, 2014, and will be apply to ships contracted for construction after 1st July 2015. It is necessary to verify the H-CSR to optimize the structural arrangement because effective date is not far off. In this study, we compared the impact by rule change for the hull girder shear strength of bulk carriers between CSR and H-CSR in respect of the yielding and buckling strength.

• 한국해양공학회지
• /
• 제33권6호
• /
• pp.495-503
• /
• 2019

Approximately 90,000 ships are registered in South Korea, and about 80,000 of these ships are used in domestic shipping. Among these, 84% are small ships, such as a fishing vessels that weigh less than 20 tons and are made mostly of an FRP (Fiber Reinforced Plastics). When this fact is taken into account, the greenhouse gas emissions that are released per ton of a composite vessel are sizeable. In this study, the laminated structures of an FRP fishing vessel, many of which currently are being built in Korea, were analyzed by ISO (International Organization for Standardization) and international design rules, and the structures of the hulls are lightweight with optimum glass fiber mass content as determined by the laminate weight minimization algorithm. As a result, it was confirmed that the laminations of the vessels in accordance with the Korean rule could have 6.4% to approximately 11% more design margin compared to the requirements of ISO and other international rules. And the case study of the application of the laminate weight minimization algorithm showed the possibility of reducing the weight of the hull bottom plating by as much as about 19.32% and by as much as about 18.06% in the overall structure.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.102-114
• /
• 2021

Biofouling represents an important problem in the shipping industry since it causes the increase in surface roughness. The most of ships in the current world fleet do not have good coating condition which represents an important problem due to strict rules regarding ship energy efficiency. Therefore, the importance of the control and management of the hull and propeller fouling is highlighted by the International Maritime Organization and the maintenance schedule optimization became valuable energy saving measure. For adequate implementation of this measure, the accurate prediction of the effects of biofouling on the hydrodynamic characteristics is required. Although computational fluid dynamics approach, based on the modified wall function approach, has imposed itself as one of the most promising tools for this prediction, it requires significant computational time. However, during the maintenance schedule optimization, it is important to rapidly predict the effect of biofouling on the ship hydrodynamic performance. In this paper, the effect of biofilm on the ship hydrodynamic performance is studied using the proposed performance prediction method for three merchant ships. The applicability of this method in the assessment of the effect of biofilm on the ship hydrodynamic performance is demonstrated by comparison of the obtained results using the proposed performance prediction method and computational fluid dynamics approach. The comparison has shown that the highest relative deviation is lower than 4.2% for all propulsion characteristics, lower than 1.5% for propeller rotation rate and lower than 5.2% for delivered power. Thus, a practical tool for the estimation of the effect of biofouling with lower fouling severity on the ship hydrodynamic performance is developed.

• 대한조선학회논문집
• /
• 제60권3호
• /
• pp.202-211
• /
• 2023

The profile shops in shipyards produce section steels required for block production of ships. Due to the limitations of shipyard's production capacity, a considerable amount of work is already outsourced. In addition, the need to improve the productivity of the profile shops is growing because the production volume is expected to increase due to the recent boom in the shipbuilding industry. In this study, a scheduling optimization was conducted for a parallel welding line of the profile process, with the aim of minimizing tardiness and the number of set-up changes as objective functions to achieve productivity improvements. In particular, this study applied a dynamic scheduling method to determine the job sequence considering variability of processing time. A Markov decision process model was proposed for the job sequence problem, considering the trade-off relationship between two objective functions. Deep reinforcement learning was also used to learn the optimal scheduling policy. The developed algorithm was evaluated by comparing its performance with priority rules (SSPT, ATCS, MDD, COVERT rule) in test scenarios constructed by the sampling data. As a result, the proposed scheduling algorithms outperformed than the priority rules in terms of set-up ratio, tardiness, and makespan.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.340-350
• /
• 2021

This paper proposes a decision support model for USVs to improve the accuracy of collision avoidance decision-making. It is formed by Navigation Safety Domain (NSD) and domain-based Collision Risk Index (CRI), capable of determining the collision stage and risk between multiple ships. The NSD is composed of a warning domain and a forbidden domain, which is constructed under the constraints of COLREGs (International Regulations for Preventing Collisions at Sea). The proposed domain based CRI takes the radius of NSD in various encounter situations as threshold parameters. It is found that the value of collision risk in any directions can be calculated, including actual value and risk threshold. A catamaran USV and 6 given vessels are taken as study objects to validate the proposed model. It is found that the judgment of collision stage is accurate and the azimuth range of risk exists can be detected, hence the ships can take direct and effective collision avoidance measures. According to the relation between the actual value of CRI and risk threshold, the decision support rules are summarized, and the specific terms of COLREGs to be followed in each encounter situation are given.