• Structural Engineering and Mechanics
• /
• 제3권2호
• /
• pp.145-162
• /
• 1995

A damped trapezoidal rule method for numerical time-integration is presented, and its application in analyses of dynamic response of damped structures is discussed. It is shown that the damped trapezoidal rule method has features that make it an attractive approach for applications in dynamic analyses of structures. Accuracy and stability analyses are developed for the damped single-degree-of-freedom systems. Error analyses are also performed for the Newmark beta method and compared with the damped trapezoidal rule method as a basis for discussion of the relative merits of the proposed method. The procedure is fully explicit and easy to implement. However, since the method is an explicit method, it is conditionally stable. The methodology is applied to several example problems to illustrate its strengths, limitations and inherent simplicity.

• Geomechanics and Engineering
• /
• 제16권6호
• /
• pp.619-626
• /
• 2018

A simple prediction procedure was investigated for calculating the stresses and displacements of a circular opening. Unlike existed approaches, the proposed approach starts each step with a radius increment. The stress for each annulus could be obtained analytically, while strain increments for each step can be determinate numerically from the compatility equation by finite difference approximation, flow rule and Hooke's law. In the successive manner, the distributions of stresses and displacements could be found. It should be noted that the finial radial stress and displacement were equal to the internal supporting pressure and deformation at the tunnel wall, respectively. By assuming different plastic radii, GRC and the evolution curve of plastic radii and internal supporting pressures could be obtained conveniently. Then the real plastic radius can be calculated by using linear interpolation in the evolution curve. Some numerical and engineering examples were performed to demonstrate the accuracy and validity for the proposed procedure. The comparisons results show that the proposed procedure was faster than that in Lee and Pietrucszczak (2008). The influence of annulus number and dilation on the accuracy of solutions was also investigated. Results show that the larger the annulus number was, the more accurate the solutions were. Solutions in Park et al. (2008) were significantly influenced by dilation.

• 한국중재학회지:중재연구
• /
• 제26권4호
• /
• pp.63-82
• /
• 2016

In order to cope with the changes of International Commercial Arbitration, the Shanghai International Economic and Trade Arbitration Commission (SHIAC) regulated an Emergency Arbitrator for the first time, implementing the arbitration rules in China (Shanghai) Pilot Free Trade Zone on May 1, 2014. Moreover, the China International Economic and Trade Arbitration Commission (CIETAC) also regulated the Emergency Arbitrator in the revised arbitration rules on January 1, 2015. However, it caused considerable contradiction that SHIAC and CIETAC admitted an interim measure decision by the Emergency Arbitrator under the circumstance that the Chinese court can impose a preservative measure in the Civil Procedure Code (CPC) and Arbiration Act. This study attempted to compare the main contents of an Emergency Arbitrator regulated in the arbitration rules of SHIAC and CIETAC with arbitration rules of representative arbitral institutions which operate an Emergency Arbitrator. In addition, this study verified the application features and problems through comparing the rule of SHIAC and CIETAC with the rule related to the preservative measure in Chinese law.

• Coupled systems mechanics
• /
• 제6권4호
• /
• pp.501-522
• /
• 2017

This paper introduces a numerical procedure to incorporate elasto-plastic local deformation effects in the dynamic analysis of beams. The appealing feature is that simple beam type finite elements can be used for the global model which needs not to be altered by the localized elasto-plastic deformations. An overlapping local sophisticated 2D membrane model replaces the internal forces of the beam elements in the predefined region where the localized deformations take place. An iterative coupling technique is used to perform this replacement. Comparisons with full membrane analysis are provided in order to illustrate the accuracy and efficiency of the method developed herein. In this study, the membrane formulation is able to capture the elasto-plastic material behaviour based on the von Misses yield criterion and the associated flow rule for plane stress. The Newmark time integration method is adopted for the step-by-step dynamic analysis.

• 한국중재학회지:중재연구
• /
• 제17권1호
• /
• pp.117-136
• /
• 2007

Currently, it is the general trend that the party's autonomy principle is applicable in determining the applicable law for the international private law and the international commercial arbitration. The purpose of this article is to make research on the party's autonomy principle for the international commercial arbitral awards. For this purpose ist to analyse regal issue the applicability of the lex mercatoria and the possibility of $d\acute{e}pe\c{c}age$ relating to the party autonomy. In this Article ist dealt with Art. 29 para. 1 of the Korean Arbitration Act in comparison with Art. 28 para. 1 UNCITRAL Model Law and Art. 1051 para. 1 of the German Code of Civil Procedure. The Art. 28 para. 1 UNCITRAL Model Law and Art. 1051 para. 1 of the German Code of Civil Procedure provides equally. "The arbitral tribunal shall decide the dispute in accordence with such 'rules of law' as chosen by the parties as applicable to the substance of the dispute. Any designation of the law or legal system of a given State shall be construed, unless otherwise expressed, as directly referring to the substantive law of that State and not to its conflict of laws rules." The term 'rule of law' used to describe the applicability of the lex mercatoria and the possibility $d\acute{e}pe\c{c}age$. Unlike Art. 28 para. 1 UNCITRAL Model Law and Art. 1051 para.1 of the German Code of Civil Procedure. Act, Art. 29(1) of the Korean Arbitration Act provides that the arbitral tribunal shall decide the dispute in accordence with the 'law' chosen by the parties as applicable to the substance of the dispute. However the majority view in Korea takes the position that the term 'law' should be interpreted broadly so as to encompass 'rules of law' at UNCITRAL Model Law and the German Code of Civil Procedure.

• Structural Engineering and Mechanics
• /
• 제12권5호
• /
• pp.507-526
• /
• 2001

In standard finite element algorithms, the local stability conditions are not accounted for in the formulation of the tangent stiffness matrix. As a result, the loss of the local stability is not adequately related to the onset of the global instability. The phenomenon typically arises with material-type localizations, such as shear bands and plastic hinges. This paper addresses the problem in the context of the planar, finite-strain, rate-independent, materially non-linear beam theory, although the proposed technology is in principle not limited to beam structures. A weak formulation of Reissner's finite-strain beam theory is first presented, where the pseudocurvature of the deformed axis is the only unknown function. We further derive the local stability conditions for the large deformation case, and suggest various possible combinations of the interpolation and numerical integration schemes that trigger the simultaneous loss of the local and global instabilities of a statically determined beam. For practical applications, we advice on a procedure that uses a special numerical integration rule, where interpolation nodes and integration points are equal in number, but not in locations, except for the point of the local instability, where the interpolation node and the integration point coalesce. Provided that the point of instability is an end-point of the beam-a condition often met in engineering practice-the procedure simplifies substantially; one of such algorithms uses the combination of the Lagrangian interpolation and Lobatto's integration. The present paper uses the Galerkin finite element discretization, but a conceptually similar technology could be extended to other discretization methods.

• 대한토목학회논문집
• /
• 제13권2호
• /
• pp.61-71
• /
• 1993

충돌이나 폭파시 발생하는 기계적 에너지나 화학적 에너지는 응력파의 형태로 매체를 통과하게 되며, 매체의 자유면과 절리면을 따라 반사와 굴절을 거듭하는 매우 복잡한 과정을 거치게 된다. 본 연구에서는 재료특성을 달리하는 층을 통과하는 소성응력파의 전파과정을 압력 부종속 모델인 Von-Mises 모델을 사용하여 연구하였다. 응력파의 전파과정을 연구하기 위한 지배 방정식(governing equation)으로서는 물체에 종속되어 있는 라그란지안 좌표계(lagrangian coordinate system)로 표현된 운동량과 질량보존(conservation of momentum and mass)법칙식을 사용하였으며 또한 충격전면(shock front)에 연속성을 부여하기 위해 인공점성(artificial viscosity)을 운동량 보존식에 첨가하였다. 주요 방정식을 풀기 위한 수치해석법으로는 시간과 공간 좌표계로 구성된 유한차분법(finite difference method)을 사용하였으며 소성변형률을 구하기 위한 소성이론으로서는 associated normality flow rule을 사용하였다.

• Structural Engineering and Mechanics
• /
• 제49권2호
• /
• pp.203-223
• /
• 2014

The extensive use of prestressed reinforced concrete (PSC) highway bridges in marine environment drastically increases the sensitivity to both fatigue-and corrosion-induced damage of their critical structural components during their service lives. Within this scenario, an integrated method that is capable of evaluating the fatigue reliability, identifying a condition-based maintenance, and predicting the remaining service life of its critical components is therefore needed. To accomplish this goal, a procedure for fatigue reliability prediction of PSC highway bridges is proposed in the present study. Vehicle-bridge coupling vibration analysis is performed for obtaining the equivalent moment ranges of critical section of bridges under typical fatigue truck models. Three-dimensional nonlinear mathematical models of fatigue trucks are simplified as an eleven-degree-of-freedom system. Road surface roughness is simulated as zero-mean stationary Gaussian random processes using the trigonometric series method. The time-dependent stress-concentration factors of reinforcing bars and prestressing tendons are accounted for more accurate stress ranges determination. The limit state functions are constructed according to the Miner's linear damage rule, the time-dependent S-N curves of prestressing tendons and the site-specific stress cycle prediction. The effectiveness of the methodology framework is demonstrated to a T-type simple supported multi-girder bridge for fatigue reliability evaluation.

• Geomechanics and Engineering
• /
• 제15권1호
• /
• pp.621-630
• /
• 2018

In the note a comprehensive and optimal passive-active mode for describing the limit failure of circular shallow tunnel with settlement is put forward to predict the catastrophic stability during the geotechnical construction. Since the surrounding soil mass around tunnel roof is not homogeneous, with tools of variation calculus, several different curve functions which depict several failure shapes in different soil layers are obtained using virtual work formulae. By making reference to the simple-form of Power-law failure criteria based on numerous experiments, a numerical procedure with consideration of combination of upper bound theorem and stochastic medium theory is applied to the optimal analysis of shallow-buried tunnel failure. With help of functional catastrophe theory, this work presented a more accurate and optimal failure profile compared with previous work. Lastly the note discusses different effects of parameters in new yield rule and soil mechanical coefficients on failure mechanisms. The scope of failure block becomes smaller with increase of the parameter A and the range of failure soil mass tends to decrease with decrease of unit weight of the soil and tunnel radius, which verifies the geomechanics and practical case in engineering.

• Geomechanics and Engineering
• /
• 제34권1호
• /
• pp.29-41
• /
• 2023

The 3D geospatial modeling of geotechnical information can aid in understanding the geotechnical characteristic values of the continuous subsurface at construction sites. In this study, a geostatistical optimization model for the three-dimensional (3D) mapping of subsurface stratification and the SPT-N value based on a trial-and-error rule was developed and applied to a dam emergency spillway site in South Korea. Geospatial database development for a geotechnical investigation, reconstitution of the target grid volume, and detection of outliers in the borehole dataset were implemented prior to the 3D modeling. For the site-specific subsurface stratification of the engineering geo-layer, we developed an integration method for the borehole and geophysical survey datasets based on the geostatistical optimization procedure of ordinary kriging and sequential Gaussian simulation (SGS) by comparing their cross-validation-based prediction residuals. We also developed an optimization technique based on SGS for estimating the 3D geometry of the SPT-N value. This method involves quantitatively testing the reliability of SGS and selecting the realizations with a high estimation accuracy. Boring tests were performed for validation, and the proposed method yielded more accurate prediction results and reproduced the spatial distribution of geotechnical information more effectively than the conventional geostatistical approach.