• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2002년도 추계학술대회 및 정기총회
• /
• pp.93-97
• /
• 2002

본 논문에서는 자연언어를 이용하는 인간의 학습방법에 기초한 LIBL방법을 선박의 조타 시스템에 적용하여, 항해사의 조타명령과 같은 언어적 지시가 조타수를 경유하여 수행되는 과정을 대체하는 지능형 조타 제어 시스템을 제안하고자 한다. 구체적인 연구방법으로는 조타수의 적절한 조타조작모델을 퍼지추론규칙을 이용하여 구현하고, 적절한 의미소 및 평가규칙을 제시한 언어지시 기반 학습방법을 선박의 조타시스템에 적용하여, 항해사의 언어지시에 보다 효율적으로 응답하는 지능형 조타기 제어 시스템을 구현한다. 퍼지추론을 이용하여 조타수의 경험을 바탕으로 한 타 조작 모델을 구축하였고, 지능형 조타 시스템을 위한 타각, 방위도달시간, 정상상태의 의미소를 제안하여, 조타수 조작 모델 규칙을 수정하기 위한 평가규칙을 제시하였다. 또한, 구축된 선박조종 시뮬레이터에 제안된 시스템을 적용하여 그 유효성을 확인하였다.

• 한국산업융합학회 논문집
• /
• 제12권1호
• /
• pp.19-25
• /
• 2009

We suggest and evaluate a dynamic scheduling rule of machines and material handling systems for on-line operation in job shop type Flexible Manufacturing System. Alternating status should be able to take operation scheduling procedures and without delay in dynamic industrial environments effectively. The interaction(SPT-NS, SPT-QSNS, SPT-NUJ, EDD-NS, EDD-QSNS, EDD-NUJ, CR-NS, CR-QSNS, CR-NUJ) between machine operation scheduling and AGV dispatching rule were also studied in this research. The performance evaluation which was obtained from DSS compares the performance of Flow time, and Empty to loaded travel ratio. It is Compared with the best rules & two system.

• 한국세라믹학회지
• /
• 제37권3호
• /
• pp.240-246
• /
• 2000

The microwave dielectric properties of the complex perovskite (Pb0.5Ca0.5)(Fe0.5Ta0.5)O3 ceramics were investigated with the porosity and the dielectric mixing rule. Assuming that the specimens were mixtures of real dielectrics and pores, with 3-0 connectivity, the ionic polarizabilities modified by Maxwell's equation were more close to the theoretical values rather than those modified by Wiener's equation in porous specimens. The theoretical dielectirc loss were obtained with the infrared reflectivity spectra from 50 to 4000cm-1, which were calculated by Kramers-Kronig analysis and classical osciallator model. The relative tendency of dielectric loss calculated from the theoretical value and Maxwell's equation in the specimens with different porosities was in good agreement with the one by the post resonant method.

• 대한산업공학회지
• /
• 제18권2호
• /
• pp.65-82
• /
• 1992

We present an approximate analytical model to estimate throughput capacity and expected waiting times for move requests of an Automated Guided Vehicle System(AGVS) used in manufacturing. This analytical model considers an empty vehicle dispatching rule, namely, the First-Come-First-Served(FCFS) rule. The performance of the analytical model is tested extensively through simulation. Using this model one can rapidly evaluate a wide range of handling and layout alternatives for given flow data. Hence, the model would be most effective when used early in the design phase to narrow down the set of alternative handling systems and configurations prior to simulation.

• Nuclear Engineering and Technology
• /
• 제45권3호
• /
• pp.277-294
• /
• 2013

In the early 1980s, attention focused on the possibility that pressurized thermal shock (PTS) events could challenge the integrity of a nuclear reactor pressure vessel (RPV) because operational experience suggested that overcooling events, while not common, did occur, and because the results of in-reactor materials surveillance programs showed that RPV steels and welds, particularly those having high copper content, experience a loss of toughness with time due to neutron irradiation embrittlement. These recognitions motivated analysis of PTS and the development of toughness limits for safe operation. It is now widely recognized that state of knowledge and data limitations from this time necessitated conservative treatment of several key parameters and models used in the probabilistic calculations that provided the technical of the PTS Rule, 10 CFR 50.61. To remove the unnecessary burden imposed by these conservatisms, and to improve the NRC's efficiency in processing exemption and license exemption requests, the NRC undertook the PTS re-evaluation project. This paper provides a synopsis of the results of that project, and the resulting Alternate PTS rule, 10 CFR 50.61a.

• Journal of Information Processing Systems
• /
• 제4권1호
• /
• pp.27-32
• /
• 2008

Minimum support and confidence have been used as criteria for generating association rules in all association rule mining algorithms. These criteria have their natural appeals, such as simplicity; few researchers have suspected the quality of generated rules. In this paper, we examine the rules from a more rigorous point of view by conducting statistical tests. Specifically, we use contingency tables and chi-square test to analyze the data. Experimental results show that one third of the association rules derived based on the support and confidence criteria are not significant, that is, the antecedent and consequent of the rules are not correlated. It indicates that minimum support and minimum confidence do not provide adequate discovery of meaningful associations. The chi-square test can be considered as an enhancement or an alternative solution.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.806-810
• /
• 2005

Slope was necessarily formed by development of hilly district for human living. At present slope is distributed about sixteen thousand in state road and expressway. Nevertheless, rule of preservation management for slope is overlapping or diffuse. In this study it analyze condition evaluation for slope.

• Nuclear Engineering and Technology
• /
• 제26권3호
• /
• pp.355-366
• /
• 1994

미국원자력규제위원회에서는 최근 안전해석에 최적전산코드의 사용을 허용하는 개정된 비상노심냉각계통 평가 규정을 제시하였다. 당 규정에서는 계통해석에 최적전산코드를 사용할 경우 불확실성 평가를 수행할 것을 요구하고 있다. 본 논문에서는 이러한 비상노심냉각계통의 규제요건을 만족하는 실제적인 최적평가방법론을 개발하여 대형냉각재상실사고에 적용하였다. 최적평가전산코드로는 RELAP5/MOD3.1을 개선한 RELAP5/MOD3/KAERI를 사용하였으며, 코드의 불확실성은 수개의 분리효과 및 총체효과 실험에 대한 평가를 수행함으로써 정량화 하였다. 적용대상 발전소로는 고리 3 & 4호기를 선정하였다. 민감도 분석을 통하여 응답방정식을 구성하였으며 각 응답방정식에 대하여 무작위 추출방식, Monte Carlo 방식으로 확률밀도함수를 구하였다. 최종 불확실성은 95%의 신뢰도로 정량화 하였으며 대형냉각재 상실사고시의 안전여유도에 대하여 논의하였다.

• Journal of Trauma and Injury
• /
• 제21권1호
• /
• pp.15-21
• /
• 2008

Purpose: National Emergency X-Radiography Utilization Study (NEXUS) criteria and the Canadian Cervical Spine rule (CCR) are commonly used in cervical trauma patients to determine whether a plain cervical X-ray should be performed. However, plain cervical X-rays are so inaccurate that cervical spine computed tomography (CT) is often considered as a screening test. We studied the usefulness of the NEXUS criteria and the CCR for determining the need for a CT evaluation in the emergency department (ED). Methods: This prospective observational study was conducted from January 2007 to March 2008. Plain X-ray and CT scans of the cervical spine were performed on blunt trauma patients with neck pain. The relevancy of CT was examined using the NEXUS criteria and the CCR. Sensitivity, specificity, positive predicted value, and negative predicted value analyses were performed to diagnose the cervical spine injury. Results: During the study period, 284 patients were enrolled in this study. The sensitivity, specificity, positive predicted value, and negative predicted value of the NEXUS criteria were 87.5%, 1.1%, 5.0%, and 60.0% respectively, while those of the CCR were 87.5%, 8.2%, 5.3%, and 91.6%. There were two missed fracture cases when the NEXUS criteria and the CCR were applied independently, however, no cases were missed when both were applied. Conclusion: This study suggests the NEXUS and the CCR in combination can be used as a guide to CT evaluation for cervical spine injury in the ED.

• 산업경영시스템학회지
• /
• 제44권4호
• /
• pp.43-52
• /
• 2021

In weapon assignment studies to defend against threats such as ballistic missiles and long range artillery, threat assessment was partially lacking in analysis of various threat attributes, and considering the threat characteristics of warheads, which are difficult to judge in the early flight stages, it is very important to apply more reliable optimal solutions than approximate solution using LP model, Meta heuristics Genetic Algorithm, Tabu search and Particle swarm optimization etc. Our studies suggest Generic Rule based threat evaluation and weapon assignment algorithm in the basis of various attributes of threats. First job of studies analyzes information on Various attributes such as the type of target, Flight trajectory and flight time, range and intercept altitude of the intercept system, etc. Second job of studies propose Rule based threat evaluation and weapon assignment algorithm were applied to obtain a more reliable solution by reflection the importance of the interception system. It analyzes ballistic missiles and long-range artillery was assigned to multiple intercept system by real time threat assessment reflecting various threat information. The results of this study are provided reliable solution for Weapon Assignment problem as well as considered to be applicable to establishing a missile and long range artillery defense system.