• Carbon letters
• /
• v.10 no.2
• /
• pp.109-113
• /
• 2009

Various silanes, amino silane, vinyl silane, TESPD, and ZS (TESPD/zinc soap complex), are added into chlorinated isobutylene-isoprene copolymer (CIIR)/soft clay/carbon black (CB). The vulcanization characteristics, the processability, and the mechanical properties are measured. In soft clay/CB filled CIIR system, there are no significant changes in Mooney viscosity among compounds. Vinyl silane added compound shows a low extrusion torque. All the silane added compounds shows an increased modulus. The mechanical properties are significantly increased when the S2 is added into CIIR/soft clay/CB compounds.

• Elastomers and Composites
• /
• v.39 no.1
• /
• pp.51-60
• /
• 2004

The cure, viscoelastic and mechanical characteristics of organoclay filled NR/BR blends were studied and compared with the properties of carbon black and silica filled NR/BR blends. The nanocomposites with extensive exfoliation state can be fabricated by a solution mixing method. In the composites, the amount of filler content was fixed to 10 phr. Degree of intercalation and exfoliation was characterized by X-ray diffraction (XRD). XRD results indicated exfoliation of the silicate layers into the rubber matrix. While the degree or intercalation and exfoliation is lowered by the conventional mixing method, extensive exfoliation can be obtained by the solution mixing method. It was found that the clay filled NR/BR compound showed better viscoelastic (tan ${\delta}$) and mechanical properties than the carbon black or silica filled NR/BR compounds.

• Elastomers and Composites
• /
• v.18 no.1
• /
• pp.8-12
• /
• 1983

The purpose of this study is to apply in various fields of products economically and practically using the characteristic of ash of holed briquette coal in maximum. According to the test results, the cure rate of ash of holed briquette coal is comparatively late. But it has shown nearly same level of physical properities compared with other fillers except hard clay and grey carbon.

• Asian Journal of Turfgrass Science
• /
• v.20 no.1
• /
• pp.83-91
• /
• 2006

This research was initiated to enhance the tilth of fine-textured soil for turf growth by incorporation of crumb rubber shredded from used tires. A specific objective was to determine the physical properties of soil mixes amended with different grade and amount of crumb rubber in soils. Two soils and three different grades(3.5, 6.5 and 9.5 mm) of crumb rubber were used. The soils selected were an Arenzville silt loam(coarse-silty, mixed, nonacid, mesic Typic Udifluvents) and a Hosmer silty clay loam(fine-silty, mixed, mesic Typic Fragiudalfs). The amount of crumb rubber mixed in soil ranged from 0 to 0.4 $g{\cdot}g^{-1}$(using 0.05 $g{\cdot}g^{-1}$) increments and 0 as a control. For each treatment, soil cores were constructed following the recommendation by the United States Golf Association Green Section Record. Results indicated that porosity of the mixes decreased as the amount of crumb rubber increased. Regardless of the grade of crumb rubber, mixes with less than 0.15 $g{\cdot}g^{-1}$ of crumb rubber in fine-textured soil could not enhance their macro-porosity and hydraulic conductivity. However, as the amendment increased over 0.15 $g{\cdot}g^{-1}$, the tilth of the mixes had improved significantly macro-porosity, hydraulic conductivity and air permeability, as compared with a control.

• Elastomers and Composites
• /
• v.41 no.4
• /
• pp.238-244
• /
• 2006

Functionalization of montmorillonite clay has been done using 3-aminopropyltriethoxy silane using water as a dispersing medium. Qualitative evidence of the presence or silane attached to the clay surface has been identified using Fourier transform infrared spectroscopy (FT-IR). Increase in silane concentration decreases the adsorbed/intercalated ratio calculated using differential thermogravimetric analysis (DTG). Average d-spacing calculated using X-ray diffraction initially increases with silane concentration and decreases slightly at higher silane concentration. The influence of processing temperature on the silane functionalization of clay has also been investigated and it shows that chemical grafting of silane on the clay surface is observed with increasing processing temperature.

• Elastomers and Composites
• /
• v.44 no.4
• /
• pp.455-465
• /
• 2009

In this study, Organo-montmorillonite(MMT) was synthesized by intercalation of various amine(Octylamine, Dodecylamine, Dimethyldodecylamine, Octadecylamine) compounds into layered silicate. Natural Rubber(NR)/MMT nanocomposites were prepared by reinforcement of Organo-MMT. X-ray diffraction(XRD) and Scanning electron microscope(SEM) were employed to characterize the layer distance of Organo-MMT and the morphology of the NR/MMT nanocomposites. The structures of the synthesized Organo-MMTs were analyzed by the measurement of FT-IR. Cure characteristics, surface free energy and mechanical properties such as tensile strength, modulus and hardness of NR/MMT nanocomposites were carefully studied by contact angle meter, ODR, UTM, and hardness tester. FT-IR analysis showed a insertion of the alkyl and amine chains into the interlayers of the MMT. It was shown that the cure time of the organo-MMT was more decreased than that of $Na^+$-MMT. Surface free energy and tensile strength of the NR/DDA-MMT nanocomposite were the highest. NR/ODA-MMT nanocomposite was the highest in hardness.

• Elastomers and Composites
• /
• v.54 no.3
• /
• pp.201-208
• /
• 2019

Superabsorbent hydrogel (SAH) is a lightly crosslinked hydrophilic functional polymer material comprising a flexible chain structure, which can absorb and retain high amounts of water or aqueous fluids even under high pressure. Therefore, it is important to improve their characteristics such as absorption performance, residual monomer content, and water permeability. SAH nanocomposites were prepared using clay mineral as an inorganic filler and the influence of post-treatment processes such as quenching and aging process on their properties was studied. In addition, surface-crosslinking process was applied to improve the absorption performance associated with mechanical properties and water permeability. The structure of the SAH was characterized using attenuated total reflectance Fourier transform infrared spectroscopy, X-ray diffraction analysis, and scanning electron microscopy.

• Elastomers and Composites
• /
• v.40 no.2
• /
• pp.112-118
• /
• 2005

Influence of a silane coupling agent on the reatraction behaviors of NR vulcanizates reinforced with carbon black and c lay was studied. Bis-(3-(triethoxysilyl)-propyl )-tetrasulfide (TESPT) was used as a silane coupling agent. The vulcanizates containing the silane coupling agent were, on the whole, recovered faster than those without the silane coupling agent. However, for the vulcanizate with the higher clay content at low temperature region (below $-12^{\circ}C$), the vulcanizate containing the silane coupling agent was recovered slower than that without the silane coupling agent. The recovery difference of the vulcanizates with and without silane coupling agent decreased with increase of clay content. The experimental results were explained with crosslink density, modulus, and bound rubber content.

• Elastomers and Composites
• /
• v.20 no.1
• /
• pp.13-24
• /
• 1985

It is generally agreed that strong linkages exist between rubber chains and reinforcing filler particles. The purpose of this study is to examine the effect of rubber-filler attachments on the various mechanical properties of the rubber. In particular, the modulus and strength will be altered by these attachments. For this study, the curing properties are examined by means of ODR (Oscillating Disk Rheometer), the physical properties by means of Instrong. The results of this study can be summarized as follows. In the ODR test, the carbon black filled stock has shorter scorch time than gum stock and, the silica and clay filled stock has longer scorch time than gum stock. In the modulus, ten sile and swelling properties, the vulcanizates filled with carbon black had higher those values than inorganic filler loaded NR vulcanizates, but the rebound rate showed that the silica filled NR vulcanizates was lower than other inorganic filler contained NR vulcanizates and the ISAF filled NR vulcanizates was lower than other carbon block contained NR vulcanizates.

• Elastomers and Composites
• /
• v.46 no.2
• /
• pp.138-143
• /
• 2011

EPDM compounds and vulcanizates containing inorganic filler such as talc, calcium carbonate, or clay as well as carbon black were prepared, and the influence of inorganic filler on properties of the EPDM compounds and vulcanizates were investigated. The bound rubber contents did not significantly increase even though the inorganic filler was added. There were big aggregates in the EPDM samples with high loading inorganic filler. By adding the inorganic filler, the cure times tended to increase and the delta torque decreased. The modulus were on the whole decreased, whereas the elongation at break, tensile strength, and tear strength were increased by adding the inorganic filler. The decreased modulus and increased elongation at break can be explained with the decreased delta torque, the increases of tensile strength and tear strength can be explained with the increased elongation at break. By adding the inorganic filler, level of reinforcing in the EPDM compounds did not increase and the crosslink density decreased.