• Elastomers and Composites
• /
• 제23권3호
• /
• pp.253-261
• /
• 1988

• Elastomers and Composites
• /
• 제45권3호
• /
• pp.223-229
• /
• 2010

We investigated the effects of processing geometry of silica-filled isobutylene-isoprene rubber (IIR) compounds on its mechanical properties and silica dispersion, using a two roll mill and an internal mixer (banbury mixer). The compound processed with the two roll mill showed the longer induction time ($t_2$), higher maximum torque ($T_{max}$), and better silica dispersion than the compound processed with the internal mixer; however, showed slightly the lower cure index ($t_{90}$). The mechanical properties (hardness, 300% modulus, tensile strength, elongation) of the compound processed with two roll mill were higher than compound done with the internal mixer.

• Elastomers and Composites
• /
• 제54권1호
• /
• pp.54-60
• /
• 2019

The rapid development of the automobile industry is an important factor that led to the dramatic development of synthetic rubber. The tread part of tire that comes in direct contact with the road surface is related to the service life of the tire. Rubber compounds used in tire treads are often blended with SBR (styrene-butadiene rubber) and BR (butadiene rubber) to satisfy physical property requirements. However, when two or more kinds of rubber are blended, phase separation and silica dispersion problems may occur due to non-uniform mixing of the rubber. Therefore, in this study, we synthesized an SBR copolymer with the same composition as that of a typical SBR/BR blend compound by controlling butadiene content during ESBR (emulsion styrene-butadiene rubber) synthesis. Subsequently, silica filled compounds were manufactured using the synthesized ESBR, and their mechanical properties, dynamic viscoelasticity, and crosslinking density were compared with those of the SBR/BR blended compound. When the content of butadiene was increased in the silica filled compound, the cure rate accelerated due to an increased number of allylic positions, which typically exhibit higher reactivity. However, the T-2 compound with increased butadiene content by synthesis less likely to show an increase in crosslink density due to poor silica dispersion. In addition, the T-3 compound containing high cis BR content showed high crosslink density due to its monosulfide crosslinking structure. Because of the phase separation, SBR/BR blend compounds were easily broken and showed similar $M_{100%}$ and $M_{300%}$ values as those of other compounds despite their high crosslink density. However, the developed blend showed excellent abrasion resistance due to the high cis-1,4 butadiene content and low rolling resistance due to the high crosslink density.

• Rubber Technology
• /
• 제8권1호
• /
• pp.7-11
• /
• 2007

• Textile Coloration and Finishing
• /
• 제22권4호
• /
• pp.300-305
• /
• 2010

Poly(ethylene terephthalate)(PET) tire cord has relatively lower adhesion properties caused by limited reacting sites. In order to improve the adhesion force between PET tire cord and rubber, an additional process to activate surface of PET has been employed. Atmospheric plasma was used to substitute the chemical finishing process of PET tire cord as a green dipping process. Contact angle was measured to confirm surface change of PET after plasma treatment. The treated PET tire cords with/without resorcinol-formaldehyde-latex(RFL) and unvulcanized rubber were vulcanized in a testing mold at $160^{\circ}C$. After atmospheric plasma treatment of PET tire cord, adhesion force was somewhat increased under some conditions.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.886-889
• /
• 2002

Finite Element Method for 3-D static loaded passenger car tire on the rigid surface is performed for studying the stiffness of tire to compare with experimental data. The tire elements used for FEM are defined each component to allow an easy change for the design parameters. Also, a hyperelastic material which is composed of tread and sidewall has been used to consider a large deformation of rubber components. The orthotropic characters of rubber-cord composite materials are used as well. The air pressure, a vertical and a lateral load are applied step by step and iterated by Modified Newton method for geometric and boundary condition nonlinear simulation. This study shows nonlinear analysis method for tire and the bearing capacity of tire due to the external force.

• Journal of Ocean Engineering and Technology
• /
• 제18권3호
• /
• pp.13-19
• /
• 2004

The structural behavior of a worn tire, attached to carbon fiber steel pile by current and wave forces, has been investigated through the numerical method. The finite element model has been developed, by considering that the composite material of rubber and cord is orthotropic, the rubber is isotropic, and that all the material behaves as linear elastic. The pressure distribution by wave and current, around the worn tire, has been estimated through the adjustment for the concept of flow separation. Also, the structural behavior of the worn tire has been examined, by comparing the situation wherein the space between the pile is reinforced, and tire as elastic and isotropic material, with the one left empty. Through this comparison, it is determined that the space between pile and tire has to be filled with elastic and isotropic material, in order to avoid the failure by wave and current action.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 한국복합재료학회 1999년도 추계학술발표대회 논문집
• /
• pp.36-39
• /
• 1999

Steel tire cords were coated via RF Plasma Polymerization of acetylene in order to enhance adhesion to rubber compounds. Adhesion of tire cords was measured by TACT as a function of plasma polymerization and argon etching conditions such as power, treatment time and chamber pressure. Tested tire cords were analysed by SEM to elucidate the adhesion mechanism. The highest adhesion values were obtained with argon etching condition at 90W, 10min, 30mtorr followed by acetylene plasma polymerization condition at 10W, 30sec., 30mtorr. In SEM analysis, the plasma polymerized tire cord at the optimized condition showed 100% rubber coverage as observed from brass-plated steel tire cords.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• 제41권7호
• /
• pp.629-634
• /
• 2017

In the case of the UHP (Ultra high performance) tire that the demand has increased rapidly, compared with the commonly used tire, severe deformation has been observed because of the low aspect ratio. When repeated deformations are applied to the sidewall rubber, accumulated fatigue damage may cause fatigue failure. Thus, the evaluation of the durability of the tire sidewall rubber has become a very important issue to prevent accidents that occur while the vehicle is running. However, the research and design criteria for the durability performance of the tire sidewall rubber hardly exist. In this study, we suggest a lifetime prediction formula using strain energy density obtained by performing tensile tests and fatigue tests on two different kinds of the tire sidewall compounds. Additionally, the applicability of our findings for low fuel consumption tires was reviewed by converting the fatigue life of the sidewall rubber into the expected mileage of the tire.

• The tire
• /
• 통권180호
• /
• pp.10-17
• /
• 1995

본 논고는 중국정부 화학공업성 산하 북경고무연구설계원 여백령 원장의 논문, 동고무공업공사, 동화공건설총공사, 중국고무공업협회, 영국 EIU의 Rubber Trends, European Rubber Journal, 국제고무연구회(IRSG), 주영 말레이지아 고무생산자연구회 등에서 발간한 자료들을 참고로 하여 작성한 것이며, 논고의 내용중 통계숫자부분에서 일부 연도(주로 1992년도)에 공란이 있는 것은 자료가 불명하기 때문이다.