• Advances in concrete construction
• /
• 제7권3호
• /
• pp.183-189
• /
• 2019

In this study, it has been tried to prepare an analytical fragility curves for isolated straight continues highway bridges by considering different spectral intensity measures. A three-span concrete isolated bridge has been selected and the seismic performance of the bridge has been improved by Lead Rubber Bearing (LRB). Incremental Dynamic Analysis (IDA) is applied to the bridge in longitudinal direction. A suite of 14 earthquake ground motions from medium to sever motions are scaled and used for nonlinear time history analysis. Fragility function considers the relationship of earthquake intensity measures (IM) and probability of exceeding certain Damage State (DS). A full three dimensional finite element model of the isolated bridge has been developed and analyzed. A wide range of different intensity measures are selected and the optimal intensity measure which has the less dispersion is proposed.

• Elastomers and Composites
• /
• 제53권4호
• /
• pp.207-212
• /
• 2018

Taylor rod impact tests have been the subject of many theoretical and experimental investigations. This paper discusses the numerical methods for simulating the Taylor impact test, which is widely used to obtain constitutive equations and failure conditions under high-velocity collisions of materials. With this in mind, a particle-based MPM (material point method) for linear viscoelastic solid materials was implemented, and MPM simulations for viscoelastic deformation behavior were numerically verified and confirmed by comparing the MPM and FEM results. In addition, this modeling and numerical approach could be extended to more complex viscoelastic models for basic understanding and to analyze the deformation and fracture behavior of more complicated viscoelastic material systems.

• 한국산학기술학회논문지
• /
• 제15권4호
• /
• pp.1859-1864
• /
• 2014

본 액화 실리콘 고무는 내열성 및 내화학적 우수성으로 전자 제품 및 다양한 제품에서 활용되고 있다. 하지만 초탄성 재료는 일반 금속재료와 다른 특성을 보인다. 초탄성 재료는 하중과 변형이 비선형 관계를 보이는 대변형 범위에서도 탄성거동을 나타내는 특성을 지니며, 비선형, 비압축성 및 대형의 특성을 지니고 있다. 이러한 특성 때문에 제품을 설계 및 생산 하기위해는 기능적 측면을 고려한 소재의 특성에 대한 물성 확보가 반드시 필요하기 때문에 현장에서 많은 어려움이 있다. 본 논문에서는 자동차용 방수커넥터 설계를 위해 소재의 인장, 압축 시험으로부터 구한 하중-변형관계를 이용하여 이를 유한 요소 해석에 적용한 결과를 비교하였으며, 해석결과와 제품의 성능 테스트 결과를 비교하여 방수커넥터용 씰의 경우 어떠한 소재특성을 적용할 경우 유용한 결과를 도출할 수 있는지를 확인하였으며, 이를 통해 제품 개발에 유용성을 확인하였다.

• 비파괴검사학회지
• /
• 제26권5호
• /
• pp.343-352
• /
• 2006

본 논문에서는 금속 연소관, 단열 고무 그리고 내열 복합재로 구성된 연소관 조립체의 접착 체결 상태를 확인하기 위해 변형률, 음향방출 신호 그리고 초음파 시험자료를 이용한 비파괴 시험 방법이 제시되었다. 또한 내압 상태에서 연소관 조립체의 각 계면 접착 상태를 정량적으로 평가하기 위해 유한요소 해석이 수행되었다. 공압 시험 중 계측한 변형률 값과 음향방출 신호 상관관계 연구를 통해 연소관 조립체의 접착 건전성 평가가 가능했다. 그리고 연소관 조립체의 여러 접착 계면 중 첫 번째 계면인 연소관과 고무간의 접착은 초음파 방법으로 분류하였다. 이러한 연구를 통해 연소관 조립체의 모든 접착 계면은 1) 초기 완전 미접착, 2) 공압 시험 중 완전 접착 분리, 3) 공압 시험 중 부분 접착 분리, 4) 완전 접착 등 4가지 형태로 분류 및 검출되었다.

• 한국자동차공학회논문집
• /
• 제15권4호
• /
• pp.10-16
• /
• 2007

A rubber seal for wheel bearing which has been mainly applied to car wheel supporting device is required to have both high sealing performance and drag torque. Because of severe operational conditions like infiltration of mud or splashed water, the importance of rubber seal which is aimed for leakage prevention of grease and effective blocking of foreign substances has been increasing continuously. The sealing performance of this seal depends on several factors such as materials of seal, friction conditions of contact regions and geometry of seals and so on. We have focused on the effects of geometric characteristics such as the angle of main lip, interference between lip edge and inner metallic ring. In this study, the optimization of geometric variables was performed using the finite element analysis. For the sake of finite element analysis, uniaxial tensile tests were conducted and several constants for Mooney-Rivlin's equation were obtained. According to the results of this study, mock-up bearing was made. To verify this study, drag torque and mud spray test were preformed.

• Elastomers and Composites
• /
• 제34권4호
• /
• pp.321-331
• /
• 1999

타이어 가황공정(curing process)은 타이어 제조를 위한 최종공정으로 여러 개의 고무배합물 층으로부터 성형된 그린타이어(green tire)를 가황기(mold)내에서 고압/고온 조건하에 유지시킴으로써 원하는 형상을 얻게 하고, 아울러 각 고무배합물이 고탄성을 갖도록 물성을 변화시키는 공정이다. 본 연구에서는 타이어 품질의 향상을 위해 가황공정을 수치적으로 최적화하는 기법을 개발하였다. 먼저, 가황공정 중 가황매체(cure media)의 최적공급 조건을 경정하기 위해 제약조건을 갖는 동적최적화문제(dynamic constrained optimization problem)로 정형화하였다. 즉, 가황기 내의 전열 및 가황 반응 현상을 묘사하는 공정모델로 표현되는 등위제약조건(equality constraint)과 가황매체가 갖는 온도의 한계를 표현하는 부등위제약조건(Inequality constraint) 아래 목적함수를 최적화 시켰다. 다음, 공급되는 가황매체의 최적조건을 결정하기 위해 구성된 최적화문제를 유한요소법(FEM)과 complex 알고리즘을 적용하여 풀었다.

• 한국항공운항학회지
• /
• 제19권4호
• /
• pp.51-57
• /
• 2011

The spin-up and the spring-back are most severe load cases in the aircraft landing gear design. These load cases are caused by reciprocal action of complex physical phenomenon such as the friction between a tire and ground, inertia of the rotation of a tire and the flexibility of a landing gear structure. Generally, the empirical formula or the theoretical formula is used to calculate the spin-up and spring-back load in the early stage of the development program of the aircraft landing gear. After the materialization of the design of a landing gear, spin-up and spring-back load are acquired by the free drop test. In this study, the spin-up and the spring-back load of the rubber shock absorber type KC-100 nose landing gear are calculated by the explicit finite element analysis. Through this analysis, more accurate and realistic spin-up and spring back loads could be applied to the early phase of the development of the aircraft landing gear.

• Elastomers and Composites
• /
• 제44권4호
• /
• pp.366-372
• /
• 2009

본 연구에서는 휴대폰 카메라용 렌즈모듈의 구조를 최적화하기 위한 연구를 수행하고자 한다. 휴대폰 카메라용 렌즈모듈의 안정적인 작동을 위해 경통부와 외장부간 결합력의 적절한 유지가 필요한데, 본 연구에서는 유한요소해석을 사용하여 적절한 결합력 유지를 위한 나사 간섭부 설계변수의 영향에 대해 고찰하였다. 또한 실험계획법을 적용하여 렌즈모듈 설계변수 최적화를 위한 연구를 수행하고, 실험계획법 결과에 대한 통계적인 분석을 통해 최적 조건을 선정하여 결합토크의 크기를 원하는 범위 내로 유지하고 동시에 산포를 감소시킴으로써 제품품질 향상에 기여하고자 한다.

• Steel and Composite Structures
• /
• 제43권1호
• /
• pp.55-66
• /
• 2022

To develop high-efficiency lateral force resistance components for high-rise buildings, a novel energy dissipation shear wall with concrete-filled steel tubular (CFST) column elements was proposed. An energy dissipation shear wall specimen with CFST column elements (GZSW) and an ordinary reinforced concrete shear wall (SW) were constructed, and experimented by low-cycle reversed loading. The mechanical characteristics of these two specimens, including the bearing capacity, ductility, energy dissipation, and stiffness degradation process, were analyzed. The finite-element model of the GZSW was established by ABAQUS. Based on this finite-element model, the effect of the placement of steel-plate energy dissipation connectors on the seismic performance of the shear wall was analyzed, and optimization was performed. The experiment results prove that, the GZSW exhibited a superior seismic performance in terms of bearing capacity, ductility, energy dissipation, and stiffness degradation, in comparison with the SW. The results calculated by the ABAQUS finite-elements model of GZSW corresponded well with the results of experiment, and it proved the rationality of the established finite-elements model. In addition, the optimal placement of the steel-plate energy dissipation connectors was obtained by ABAQUS.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.237-242
• /
• 2008

This paper presents vibration control of an active hybrid engine mount featuring magneto-rheological (MR) fluid and a piezostack actuator. On the basis of the conventional passive rubber mount, MR fluid is adopted to improve isolation performance at resonant frequencies, whereas the piezostack actuator is adopted for performance improvement at non-resonant frequencies, especially at high frequencies. Based on some particular practical requirements of engine mounts, the proposed mount is designed and manufactured. The characteristics of rubber element, piezostack actuator and MR fluid are verified for system analysis and controller synthesis. The model of the proposed mount with a supported mass (engine) is established. In this work, a sliding mode controller is synthesized for the mount system to reduce vibrations transmitted from the engine in a wide frequency range. Computer simulations are performed to evaluate the performances of the proposed active engine mount in time and frequency domains.