• Journal of the Korean Wood Science and Technology
• /
• v.43 no.3
• /
• pp.355-363
• /
• 2015

Asian lignin was efficiently depolymerized with supercritical ethanol and Ru/C catalyst at various reaction temperature (250, 300, and $350^{\circ}C$). Lignin-oil was subjected to several physicochemical analyses such as GC/MS, GPC, and elemental analysis. With increasing reaction temperature, the yield of lignin-oil decreased from 89.5 wt% to 32.1 wt%. The average molecular weight (Mw) and polydispersity index (Mw/Mn) of lignin-oil obtained from $350^{\circ}C$ (547Da, 1.49) dramatically decreased compare to those of original asian lignin (3698Da, 2.68). This is a clear evidence of lignin depolymerization. GC/MS analysis revealed that the yield of monomeric phenols involving guaiacol, 4-ethyl-phenol, 4-methylguaiacol, syringol, and 4-methysyringol increased with increasing reaction temperature, and these were mostly produced with applying hydrogen gas and Ru/C catalyst (76.1 mg/g of lignin). Meanwhile, the carbon content of lignin-oil increased whereas the oxygen content decreased with increasing reaction temperature, suggesting that hydrodeoxygenation was significantly enhanced at higher temperature.

• Transactions of the Korean hydrogen and new energy society
• /
• v.19 no.6
• /
• pp.467-473
• /
• 2008

This study is to investigate the influence of catalyst loading quantity on the direct methanol fuel cell (DMFC) performance. In this paper, Pt-Ru and Pt-black loading as the catalyst were varied from 1 to $4mg/cm^2$ at the anode and cathode, respectively. The experiment was conducted with single fuel cell consisted of $5cm^2$ effective electrode area, serpentine type flow pattern and Nafion 117 membrane. Also, AC impedance and methanol crossover current were measured to investigate the performance loss precisely. As a result, the performance of fuel cell was significantly increased with the increase of cathode catalyst loading. However, the performance did not increase further above a certain Pt-Ru catalyst loading as the increase of anode catalyst loading.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.191-194
• /
• 2009

PtRu based and PtSn based ternary catalysts were prepared by a conventional impregnation method using NaBH4 as reducing agent. The alloy formation, crystalline size and chemical composition of the in-house catalysts were determined by XRD, TEM and EDX, respectively. The chemical compositions of in-house catalysts were quite similar to the nominal value and good alloy formations were also observed. Further, crystalline sizes of ternary catalysts were comparatively smaller than binary catalysts and were approximately 3.5 ~ 5.5 nm. The electrochemical measurements were carried out in the solution 1 M $H_2SO_4$ with 1 M $C_2H_5OH$ at room temperature. LSV results obtained that ternary catalysts were higher current densities and specific activities. Especially, in case of tungsten addition system, Pt5Sn4W/C have the highest specific activities values and was approximately 21.2 and 3.1 times higher than that of PtRu/C and PtSn/C electrocatalyst.

• Korean Journal of Materials Research
• /
• v.21 no.8
• /
• pp.419-424
• /
• 2011

Pt nanoparticle catalysts incorporated on $RuO_2$ nanowire support were successfully synthesized and their electrochemical properties, such as methanol electro-oxidation and electrochemically active surface (EAS) area, were demonstrated for direct methanol fuel cells (DMFCs). After fabricating $RuO_2$ nanowire support via an electrospinning method, two different types of incorporated Pt nanoparticle electrocatalysts were prepared using a precipitation method via the reaction with $NaBH_4$ as a reducing agent. One electrocatalyst was 20 wt% Pt/$RuO_2$, and the other was 40 wt% Pt/$RuO_2$. The structural and electrochemical properties of the Pt nanoparticle electrocatalysts incorporated on electrospun $RuO_2$ nanowire support were investigated using a bright field transmission electron microscopy (bright field TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and cyclic voltammetry. The bright field TEM, XRD, and XPS results indicate that Pt nanoparticle electrocatalysts with sizes of approximately 2-4 nm were well incorporated on the electrospun $RuO_2$ nanowire support with a diameter of approximately 50 nm. The cyclic voltammetry results showed that the Pt nanoparticle catalysts incorporated on the electrospun $RuO_2$ nanowire support give superior catalytic activity in the methanol electro-oxidation and a higher electrochemically active surface (EAS) area when compared with the electrospun Pt nanowire electrocatalysts without the $RuO_2$ nanowire support. Therefore, the Pt nanoparticle catalysts incorporated on the electrospun $RuO_2$ nanowire support could be a promising electrode for direct methanol fuel cells (DMFCs).

• Transactions of the Korean hydrogen and new energy society
• /
• v.21 no.5
• /
• pp.390-397
• /
• 2010

0.5wt% Ru/$\alpha-Al_2O_3$ catalysts are prepared by deposition-precipitation method for the preferential CO oxidation In order to investigate the effect of pH on the Ru dispersion and particle size, the pH of precursor solution is adjusted to between 5.5 and 9.5. 0.5wt% Ru/$\alpha-Al_2O_3$ catalyst prepared at the pH of 6.5 has high Ru dispersion of 17.9% and small particle size of 7.7nm. In addition, 0.5wt% Ru/$\alpha-Al_2O_3$ catalyst prepared at the pH 6.5 is easily reduced at low temperatures below $150^{\circ}C$ due to high dispersion of $RuO_2$ particle and shows high CO conversion over 90% in the wide temperature range between $100^{\circ}C$ and $160^{\circ}C$. Moreover, the deposition-precipitation is a feasible method to improve the Ru dispersion as compared to the impregnation method. The 0.5wt% Ru/$\alpha-Al_2O_3$ catalyst prepared by deposition-precipitation exhibits higher CO conversion than 0.5wt% Ru/$\alpha-Al_2O_3$ catalysts prepared by impregnation due to higher metal dispersion and better reducibility at low temperature.

• 한국전기화학회:학술대회논문집
• /
• 2001.06a
• /
• pp.167-170
• /
• 2001

• 한국전기화학회:학술대회논문집
• /
• 2004.06a
• /
• pp.195-198
• /
• 2004

• Proceedings of the Korean Magnestics Society Conference
• /
• 2016.05a
• /
• pp.65-65
• /
• 2016

• 한국전기화학회:학술대회논문집
• /
• 2003.10a
• /
• pp.40-40
• /
• 2003

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.28-28
• /
• 2018

수전해(electrochemical water splitting)는 연료전지의 가역적 역반응을 이용하여 물로부터 수소와 산소를 발생시키는 기술이다. 산소는 음극에서 발생하는데, 이 때 음극 표면은 고농도의 산소 음이온 및 라디칼에 장시간 노출된다. 때문에 기계적, 화학적 내구성이 우수한 전극재를 사용할 필요가 있다. 불용성 전극 (dimensionally stable anode, DSA)은 이러한 기술적 요구사항을 잘 만족하는 상용화 된 전극이다. 티타늄이나 티타늄 합금 표면에 촉매를 미량 반복 살포하여 산화물 형태의 매우 견고한 표면을 형성함으로서 내구성을 확보한다. 그러나, 보통 DSA 제조 기법의 특징에 따라 다공성 표면 구조를 사용하지는 않기 때문에 생산 과정이 복잡하고 비용이 많이 발생하는 문제를 여전히 나타내고 있다. 본 연구는 상기 문제를 개선하기 위한 수전해용 음극 제조 기술에 관한 연구이다. 티타늄과 티타늄 합금은 동일한 양극산화 기술 적용이 가능하다는 점을 이용하여 티타늄 기판으로부터 다공성 구조를 형성함으로써 바인더의 사용을 배제하였다. 단일공정양극산화기법 (single-step anodization)을 이용하여 $IrO_2$와 $RuO_2$를 도핑함으로써 TiO2에 촉매능을 부여하였다. 제조된 나노튜브들의 구조적 특징을 HR-TEM (High-resolution transmission electron microscope)과 FE-SEM (Field-emission scanning electron microscope)으로 분석하고 SAED (selective area electron diffraction) 패턴을 분석하여 전극재의 결정성을 확인하였다. 알칼라인 분위기에서 일으킨 산소발생반응 (oxygen evolution reaction, OER)의 LSV (linear sweep voltammetry) 결과를 XPS (X-ray photoelectron microscoscopy) 결과와 연관지어 촉매 표면 구조와 과전압의 관계를 해석하였다. LSV 결과로부터 Tafel 분석을 연달아 수행함으로써 전극의 속도결정단계를 정의하였다. 최종적으로 사이클 테스트 통하여 DSA로써의 성능을 평가하였다.