• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.1
• /
• pp.215-221
• /
• 2016

In this thesis we introduce a large quantity of input interface system using a low cost single chip microcontroller which is consists of walking board with 1600 switches, RS485 communication for switch data communication and PC application software for walking pattern analysis. When a pedestrian walks on the walking board, the pattern analysis of foot pressed switches can be utilized on diverse divisions of sports and industry such as walking physical therapy, dancing, a large quantity of sensors interface system, etc.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.639-641
• /
• 2002

In this paper, we proposed the multiple access control of RS232C Serial Communications protocol using collision sense method. The communications wires of data transmission and reception are tied together through the buffer each to connect to the multiple communication channels. The hardware interface and control program are designed to build the prototype system and the experimental multiple access communications network is built by multiple PC systems and the transfer completion rate results are shown.

• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.165-168
• /
• 2002

This paper has been studied about the real time monitoring system development using TCP/IP ethernet and RS-422 serial communication link in general communication methods that rocket fire control agents could be monitoring about real time Rocket fire event procedures and be managing total rocket fire courses. Also, this paper has been studied the HMI(Human Machine Interface) control program and algorithm that guarantee confidential control for the Fire Display System.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.7B
• /
• pp.575-582
• /
• 2008

The existing patient monitoring system when the patient want own information. The patient confirm information through the medical institution. But the patient monitoring system based on the U-Healthcare, the patient always confirms own information through the mobile device including rfid reader. The patient need RFID middleware design to provide wanting service when the RFID reader read patient's tag information. The RFID middleware is consisted of RFID module, ARM processor and RS-232 interface. The RFID module is used to be inputted user information and RS-232 interface pass information by RFID middleware. Also, This system is embodied by specific patient monitoring system using embedded exclusive use ARM processor. In this paper introduces concept and action principle of RFID middleware and embodied patient monitoring system that use Qt.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.2 s.302
• /
• pp.19-26
• /
• 2005

This paper is about designing and implementation of Multi-Function UHF RFID Reader Platform that receives and processes RFID tag data from the tags, and transmits the data to PC server through Bluetooth, USB, RS-232 or Ethernet. This reader system is composed of RFID module, ARM processor, RS-232 interface, USB, Ethernet MAC interface, Bluetooth etc.. This paper also provides a brief overview and concept of RFID reader, and proposes the design and implementations of the RFID reader platform. The paper evaluates and analyzes two practical implementations, fixed type and portable type.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.539-542
• /
• 2002

본 논문에서 는 64채널 DWDM(Dense Wavelength Division Multiplexing)용 광원(Optical Source)을 구현하고, 이를 효율적으로 제어하기 위하여 I$^2$C Bus interface를 이용한 제어기를 설계하였다. 채널은 독립적으로 동작될 수 있도록 각각 Laser Diode 구동 회로와 마이크로프로세서, A/D 및 D/A 컨버터로 구성하였으며, 또한 각 채널들은 하나의 I$^2$C Bus를 통해 주 제어기와 연결된다 주 제어기는 RS-232 및 LAN을 통해 틀어오는 사용자의 명령을 I$^2$C Bus를 이용하여 각 채널에 전달하고, 채널로부터 들어오는 정보를 사용자에게 제공한다. RS-232C 및 LAN을 통한 PC와의 전송속도는 57600BPS로 구현하였다.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2808-2810
• /
• 2000

Most measuring devices are equipped with RS232 interface or GPIB interface for communicating with computers. If the measuring devices can be accessed by a server computer, the valuable information from the devices can be effectively shared with other computer via internet. VRML is a web based technology for specifying and delivering three-dimensional interactive visualizations over the internet through a web browser. This paper proposes a remote 3-dimensional monitoring system for digital multimeter equipped with RS232 interface by utilizing VRML.

• Journal of Advanced Navigation Technology
• /
• v.14 no.4
• /
• pp.545-552
• /
• 2010

In this paper, we study on a radio multiple sensing interface module to accurately decide serious error sources that are happened by unexpectable problems in industrial fields, in addition, we study a reliability improvement scheme to guarantee the integrity of multiple sensing data. For multiple sensing interface module, communication drivers such as USART, TWI, ADC and GPIO-I2C are implemented. to improve the transmission reliability, reed-Solomon code is used. From the simulation result of this system in indoor environment, we confirm that the reliability of RS coded data is improved about 5 times than uncoded data. Moreover, we prove that multiple sensing interface module is suitable to diagnose error sources of industrial automaton equipment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.7
• /
• pp.1445-1451
• /
• 2005

Home-Network is an integrated network of the PC and all electric home appliances in the home so that they can communicate with each other. In the 21th century, here are various technology for Home Network environment such as HomePNA, IEEE 1394, Ethernet Lan and Bluetooth. For Home Network construction, generally, the standard series interface 'RS232' is used to make communication possible between electric home appliances. However Home network using RS232 has a problem. That is, All machines have to be connected to each other with RS232 using Point-to-Point mode. In this case, the system becomes complicated because we have to use circuits as much as there are machines and increased expenses. To improve this problem, In this thesis, designed home network using RS422 Multi-drop mode serial communication and controled it with embedded linux system. And connected RS422 with motors and sensors using PIC to make the home network virtual environment.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.512-516
• /
• 2005

Home-Network is an integrated network of the PC and all electric home appliances in the home so that they can communicate with each other. In the 21th century, here are various technology for home Network environment such as HomePNA, IEEE1394, Ethernet Lan and Bluetooth. For Home Network construction, generally, the standard series interface 'RS232' is used to make communication possible between electric home appliances. However Home network using RS232 has a problem. That is, All machines have to be connected to each other with RS232 using Point-to-Point mode. In this case, the system becomes complicated because we have to use circuits as much as there are machines and increased expenses. To improve this problem, In this thesis, designed home network using RS422 Multi-drop mode serial communication and controled it with embedded linux system. And connected RS422 with motors and sensors using PIC to make the home network virtual environment.