• Journal of Biosystems Engineering
• /
• v.41 no.4
• /
• pp.281-287
• /
• 2016

Purpose: The purpose of this study is to develop a walking-type two-row sesame reaper, which can simultaneously perform the cutting and collecting of sesame plants and other crops like perilla and soybean. Methods: The factors involved in reaping sesame were determined experimentally in order to design a prototype of the sesame reaper. The prototype is made up of four parts for cutting, conveying, collecting, and running. The height of two disc-plate saw blades on the cutting part is adjusted by an adjusting wheel, and peripheral speed is adjusted in accordance with the running speed. The conveying belt of the conveying part can be tilted from $0^{\circ}$ to $90^{\circ}$. The collecting part extracts a predetermined amount of transferred sesame plants. The prototype was used to evaluate the performance at different working speeds, so that the work efficiency can be calculated. Results: The center of gravity of the sesame plants was 900 mm, measured from the end of the cut stem. The diameter of the disc-plate saw blade was determined to be 355 mm, peripheral speed was 20.4-32.7 m/s, and the picking height of the conveying belt for sesame was 130 mm. The performance of transfer and collection of the sesame, when the insertion angles were $60^{\circ}$ and $90^{\circ}$, proved to be excellent. However, when the angle was over $120^{\circ}$, the performance was only 75-80%. The performance was at 100% efficiency when the ratio between running speed and conveying belt speed of the prototype was 1:2, which seems to be the ideal ratio for the sesame reaper. Conclusions: A sesame reaper was developed, which can integrate the processes of cutting, conveying, and collecting, by investigating and considering various factors involved in the reaping process. The sesame reaper can reduce the costs for yielding and producing sesame due to its highly efficient performance.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.3
• /
• pp.205-212
• /
• 2013

The objective of this study was to investigate the feasibility of replacing a conventional plate fin-tube evaporator with a spiral fin-tube evaporator by comparing the performance of domestic refrigerator-freezers adopting either the plate fin-tube evaporator or spiral fin-tube evaporator. Experiments were conducted for the domestic refrigerator-freezers using either a 2-column and 15-row plate fin-tube evaporator or three spiral fin-tube evaporators with 11, 13, and 15 tube rows (N). The optimum refrigerant charge decreased with a decrease in the number of tube rows. The power consumptions of the domestic refrigerator-freezers using the spiral fin-tube evaporators with N = 11 and 13 were 2.8% and 1.5% lower than those using the plate fin-tube evaporator, respectively. In addition, the cooling capacity of the spiral fin-tube evaporator with N = 13 was 3%-7% higher than that of the plate fin-tube evaporator under the frosting condition. In a cooling speed test, all of the evaporators showed similar performances.

• Applied Chemistry for Engineering
• /
• v.7 no.5
• /
• pp.985-991
• /
• 1996

In chromatographic separation, HETP(height equivalent to a theoretical plate) is a useful quanititive parameter and it is wildely designated as column efficiency. The effects of operating conditions (sample concentration, injection volume, flow rate and mobile phase composition) on HETP were investigated in perparative liquid chromatography (PLC). Water and organic modifier of methanol were used as mobile phase. The sample of thymidine was injected into preparative C18 columns. The system was run by a isocratic mode in 1.5~5.5ml/min. The larger amounts of sample and higher flow rates of mobile phase increased HETP, which means that column efficiencies were worse. As the weight of sample injected into a chromatographic system could be prepared with different concentrations and injection volumes, for the same amount of sample, HETP was approximately increased two times with the ten-fold injection volume. HETP was mainly affected by the resistance of stationary and mobile phase mass transfer in the intraparticle section of packings at higher velocities.

• Journal of Korean Society of Steel Construction
• /
• v.24 no.1
• /
• pp.47-58
• /
• 2012

Dynamic behaviors of a corrugated steel plate tunnel lining system are examined under wind loads due to passing vehicles. Applied wind loads are simulated by applying the time functions as a vehicle moves through the tunnel. Wind loads are described by the pressure and suction as a vehicle arrives and leaves target positions in the tunnel. The tunnel lining is modeled using the simplified shell elements that retain the characteristics of the corrugated shapes. The displacements of the tunnel lining are evaluated under various conditions regarding wind velocity and the passing vehicles. The responses are found to increase as the vehicle velocity and wind velocity increase. A maximum displacement of 25mm occurs when two vehicles are crossing at the speed of 120km/h. A row of vehicles running consecutively minimally affects the dynamic responses with less than 2.5% of the dynamic responses enlarged and attributed to one running vehicle. It should be noted that the dynamic responses of the tunnel lining should be considered when there is no shotcrete applied.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.2
• /
• pp.588-593
• /
• 2011

For the progressive notching and forming die, analyzing beforehand according to the interpretation of thin plate molding for massive production is essential. In this study, we dealt with Ez5 particularly its strip layout design based on the exported die as ordered by Japanese S automobile company's local factory in the USA. We completed the strip layout design consisting of 13 processes by optimizing the blank layout with arrays of a single carrier with wide width drawn in 1 row. This type of die is expected to be ordered in bulk frequently and at the same time via the Internet; any company with die technology will be required to cope with such type of die.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2309-2311
• /
• 1998

The attitude control of a double inverted pendulum with a periodical disturbance at link top is dealt in this paper. The proposed system is consisted of the double inverted pendulum and a disturbance link. The lower link is hinged on the plate to free for rotation in the vertical plane. The upper link is connected to the lower link through a DC motor. The DC motor is used to control the posture of the pendulum by adjusting the position of the upper link. The periodical disturbance can be generated by the additional link attached at the end of link 2 through another DC motor, which is the modeling of a posture for a biped supporting with one leg. The motor for the joint simulates the knee joint(or hip joint) and the disturbance for the legs moving in air. The algorithm for controlling a proposed inverted pendulum is consisted of a state feedback control and a fuzzy logic controller. The fuzzy controller keeps the center of gravity of the biped within the specified range through the nonlinear feedback compensator. The state feedback control takes over the role to maintain a desired posture regardless the disturbance at the link top. In these case, the change of the angle and COG of an upper link is compensated with on-line. Simulations with a mathematical model are conducted to show the validity of the proposed controller.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.17 no.4
• /
• pp.129-134
• /
• 2009

The objectives of this paper are to study the effects of thermal and geometric conditions on the performance of indoor heat exchangers with R-410A for Gas Engine Driven Heat Pump (GHP) application and to find the optimum design conditions of indoor heat exchangers by parametric analysis for the key parameters. The key parameters are number of tube row, number of tube pipe, fin pitch and transverse tube pitch. In the air side, moisture out of the humid air condenses on the fin surface while the refrigerant (R-410A) boils inside the smooth tube. Therefore this study uses Log Mean Enthalpy Difference (LMHD) method to analyze the heat transfer from the humid air to the refrigerant. This study determines the heat exchanger size, air side/refrigerant side pressure drop and overall heat transfer coefficient. Optimum design conditions for the key parameters are also determined by the parametric analysis. The results show that number of rows and pipes, fin pitch have significant effect on the heat exchanger size. It is also found that the tube length of the louver fin is $17{\sim}30%$ shorter than that of the plate fin.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.4
• /
• pp.397-406
• /
• 2009

This study was carried out to investigate the microclimate (photosynthetically active radiation and temperature) response to different shading materials(shade plate, and polyethylene net) on Korean ginseng(Panax ginseng C.A. Meyer) bed. Photosynthetically active radiation(PAR) under polyethylene net was approximately 24 ~ 30% higher than that under shade plate on sunny day. Also, PAR was remarkably decreased from the front to the rear rows of ginseng beds. Temperature under polyethylene net was higher than that of shade plate. Internal temperature under polyethylene net was 1.9 ~ 3.1% higher than that under shade plate at the different rows of ginseng bed. Mean of total daily temperature under polyethylene net was higher at the rear rows than at the front rows, while that under shade plate was higher at the front rows than at the rear row of ginseng bed. Mean of total daily temperature on sunny days(April 15 and May 17) was 7.3% lower under shade plate than above outside but, polyethylene net was 0.7% high, while that on cloudy days(April 11 and May 15) was 1.6% higher under polyethylene net than above outside, but shade plate was 0.7% low. Also, overall mean of total daily temperature under polyethylene net was 7.0, 7.8, and 8.8 % on sunny day(April 15 and May 17), and 1.7, 1.6, and 3.5% on cloudy day(April 11 and May 15) higher than that under shade plate, respectively. The SPAD values of 6 years old ginseng at two point(front, center) in bed under shade plate showed the highest value, and the lowest under polyethylene net. The SPAD of 6 years old ginseng at rear in bed was not statistically significant under two shading materials.

• The korean journal of orthodontics
• /
• v.35 no.3 s.110
• /
• pp.238-249
• /
• 2005

The contemporary two-jaw surgical approach usually involves a Le Fort osteotomy of the maxilla and a ramal osteotomy of the mandible with 3-dimensional repositioning of the jaws as well as the occlusal planes. After making the surgical treatment plan. the surgical movements are duplicated in the model surgery. During this procedure, reference poings and lines are drawn on the base of the models over the dental arch and sawcuts are mads according to these marked osteotomy lines. This technique, however, has been found to be inexact. especially when the laws are moved in several dimensions simultaneously. To overcome this. different methods have been developed for an accurate repositioning of the jaws as planned. A new appliance. Surgical Jaw Relater, has been devised by th8 author for the simple 3-dimensional relocation of the upper and lower models, resulting in the easy construction of the splints such as centric relation splint, intermediate and final splint. This article describes an introduction and a clinical application of this appliance. Through the application of this system to the orthognathic cases including two-law surgery. it is proved that the row device is very clinically useful.

• Korean Journal of Optics and Photonics
• /
• v.10 no.1
• /
• pp.21-26
• /
• 1999

The technique for calibrating standard particles larger than 1 $\mu$m by using an optical array sizing method has been established. The system consists of an optical microscope with transmission light source, a CCD camera, and a computer equipped with a frame grabber. The center distance between two spheres located at both ends of a row which consists of N spheres is measured in terms of pixel numbers, and divided by (N-1) to obtain the average pixel numbers per particle. This value is multiplied by length conversion constant, which has been determined in advance, to obtain the mean diameter of polystylene spheres. The length conversion constant is found from the microscopic image of calibrated standard stage micrometer plate. In order to reduce error in finding center positions of the scale and particles in the image, a software filter which dilates bright (or dark) object has been used. Spheres having nominal size of 1, 2, 3, 5, and 10$\mu$m were measured, and the maximum deviation of the measured mean diameter valus from their certified values was 0.7%. Standard particles which is larger than 1 $\mu$m can be calibrated by this method with measuredment uncertainy (k=2) lees than 1.53%.