• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.404-407
• /
• 2014

Delay Tolerant Network (DTN) is a networking architecture that is designed to solve network problem in unstable and stressed environments using the Store-Carry-Forward method. Different form general networks, DTN does not guarantee the end-to-end connectivity, it is hard for the exiting TCP/IP based protocols to normally work due to the characteristic such as large latency and unstable link connectivity. And the condition that send massage without the information of the destination occurs frequently. Thus, suitable routing protocols for DTN are required and being researched. In this paper, we propose a novel routing protocol for DTN utilizing epidemic and prediction based algorithm to prevent the defect of previously DTN routing protocols such as the absence of the holistic view of the network. Proposed algorithm predicted destination using the mobility information recorded in neighbor node's history and utilize epidemic based algorithm when occurred condition without destination's information. This algorithm is enhanced in terms of delivery ratio, decreases latency and overhead in sparse network such as DTN.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.5
• /
• pp.2245-2266
• /
• 2016

The hop count routing metric is widely used in routing protocols of Wireless Sensor Networks (WSNs) due to its simplicity and effectiveness. With a lower hop count route, fewer transmissions are required to send a packet from the source to the destination. This can improve the throughput of a network because fewer transmissions results in less channel contention and interference. Despite this, the hop count routing metric may not be ideal for mobile scenarios where the topology of a network changes constantly and rapidly. In this paper, we propose to increase route stability in mobile WSNs by discovering paths that are more stable during route discoveries using routing metrics. Two routing metrics were proposed, the true beauty of these routing metrics lies in the fact that they can even be used even without specialized hardware such as GPS and other sensors. We implemented the proposed routing metrics in the AODV routing protocol and found that they are highly effective and outperform other stability-based routing metrics and the hop count routing metric.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.6
• /
• pp.1357-1378
• /
• 2013

Energy constraint of wireless sensor networks makes energy saving and prolonging the network lifetime become the most important goals of routing protocols. In this paper, we propose an Energy Efficient Chain-based Routing Protocol (EECRP) for wireless sensor networks to minimize energy consumption and transmission delay. EECRP organizes sensor nodes into a set of horizontal chains and a vertical chain. Chain heads are elected based on the residual energy of nodes and distance from the header of upper level. In each horizontal chain, sensor nodes transmit their data to their own chain head based on chain routing mechanism. EECRP also adopts a chain-based data transmission mechanism for sending data packets from the chain heads to the base station. The simulation results show that EECRP outperforms LEACH, PEGASIS and ECCP in terms of network lifetime, energy consumption, number of data messages received at the base station, transmission delay and especially energy${\times}$delay metric.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.9
• /
• pp.4272-4286
• /
• 2016

In resource constrained sensor networks, usage of efficient routing protocols can have significant impact on energy dissipation. To save energy, we propose an energy efficient routing protocol. In our approach, which integrates clustering and routing in sensor networks, we perform network coding during data routing in order to achieve additional power savings in the cluster head nodes. Efficacy of the proposed method in terms of the throughput and end-to-end delay is demonstrated through simulation results. Significant network lifetime is also achieved as compared with other techniques.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.8 no.1
• /
• pp.47-53
• /
• 2012

Sensor networks and car networks that have different structure from that of conventional TCP/IP network require extreme network environment due to frequent change of connectivity. Because such extreme network environment has characteristics like unreliable link connectivity, long delay time, asymmetrical data transfer rate, and high error rate, etc., it is difficult to perform normally with the conventional TCP/P-based routing. DTNs (delay and disruption tolerant network) was designed to support data transfer in extreme network environment with long delay time and no guarantee for continuous connectivity between terminals. This study suggests an algorithm that limits the maximum number of copying transferred message to L by improving the spray and wait routing protocol, which is one of the conventional DTNs routing protocols, and using the azimuth and density data of the mobile nods. The suggested algorithm was examined by using ONE, a DTNs simulator. As a result, it could reduce the delay time and overhead of unnecessary packets compared to the conventional spray and wait routing protocol.

• Journal of Communications and Networks
• /
• v.16 no.6
• /
• pp.613-619
• /
• 2014

Multicast routing algorithms designed for wireline networks are not suitable for wireless environments since they cannot efficiently exploit the inherent characteristics of wireless networks such as the broadcast advantage. There are many routing protocols trying to use these advantages to decrease the number of required transmissions or increase the reception probability of data (e.g., opportunistic routing).Reducing the number of transmissions in a multicast tree directly decreases the bandwidth consumption and interference and increases the overall throughput of the network. In this paper, we introduce a distributed multicast routing protocol for wireless mesh networks called NCast which take into account the data delivery delay and path length when constructing the tree. Furthermore, it effectively uses wireless broadcast advantage to decrease the number of forwarding nodes dynamically when a new receiver joins the tree.Our simulation results show that NCast improves network throughput, data delivery ratio and data delivery delay in comparison with on demand multicast routing protocol. It is also comparable with multichannel multicast even though it does not use channeling technique which eliminates the interference inherently.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.5B
• /
• pp.464-470
• /
• 2011

V2V (Vehicle-to-Vehicle) is a special kind of VANET (Vehicular Ad-hoc Network), which has high mobility and frequent topology changes and causes the link breakage problem. To resolve this problem, geographic routing protocols such as greedy forwarding are proposed. However, the greedy forwarding approach selects the node closest to the destination node as the transfer node within the transmission range so that it may cause many problems owing to many intersections and many changes in vehicular traffic in urban areas. The paper proposes a greedy perimeter urban routing (GPUR) algorithm considering the presence of 2-hop neighbor nodes and the road characteristics. Simulation results using ns-2 reveal that the proposed GPUR algorithm significantly reduces the routing error problem and the probability of local maximum than the existing routing protocols.

• The Journal of the Korea Contents Association
• /
• v.7 no.11
• /
• pp.111-119
• /
• 2007

Sensor networks are needed for special purposes such as collecting or transmitting information by using sensor devices, for which various routing protocols have been proposed. Among existing protocols, the modified PEGASIS routing technique is known to be effective when applied to cases with directional transmissions of data. However it does not consider recovery from errors or guaranteeing stability in data transmission, while sensor devices performing repetitive relays and controls are prone to errors. In this paper, a double relay routing protocol for Zigbee based sensor networks where data are transfered reliably with a linear direction. The proposed protocol is effective in the sense that it secures the relaible transmission of data with minimal energy consumption based on a directional data transfer. A streetlight control system has been presented as an application of the proposed protocol.

• Journal of KIISE
• /
• v.43 no.12
• /
• pp.1428-1436
• /
• 2016

A multipath routing in wireless sensor networks (WSNs) provides advantage such as reliability improvement and load balancing by transmitting data through divided paths. For these reasons, existing multipath routing protocols divide path appropriately or create independent paths efficiently. However, when the sink node moves to avoid hotspot problem or satisfy the requirement of the applications, the existing protocols have to reconstruct multipath or exploit foot-print chaining mechanism. As a result, the existing protocols will shorten the lifetime of a network due to excessive energy consumption, and lose the advantage of multipath routing due to the merging of paths. To solve this problem, we propose a multipath creation and maintenance scheme to support the mobile sink node. The proposed protocol can be used to construct local grid structure with restricted area and exploit grid structure for constructing the multipath. The grid structure can also be extended depending on the movement of the sink node. In addition, the multipath can be partially reconstructed to prevent merging paths. Simulation results show that the proposed protocol is superior to the existing protocols in terms of energy efficiency and packet delivery ratio.

• Journal of KIISE:Information Networking
• /
• v.30 no.1
• /
• pp.126-133
• /
• 2003

The existing active routing Protocols assume that the active network topology is static or pre-configured. However a dynamic mechanism to route an active Packet according to the network condition is required due to the dynamic characteristic of the active network. As active routing protocols, SLRP and TCOM500 PLAN project have been proposed, but since both of them are based on the assumption of the static topology we can not say that they are dynamic routing protocols in their entirety. Therefore, in this paper, we propose a new active network routing protocol, called AOSPF (Active Open Shortest Path First), which is compatible with the existing IP routing protocol. AOSPF is an extension of OSPF by adding a new LSA (Link State Advertisement) to allow the active network routing. The newly introduced LSA is used to specify whether the corresponding router is an active router or not. and one bit in the OPTION field of an LSA packet is used as the active router indication bit. This way of extending OSPF is similar to the scheme used in the extension of OSPF for multicast, i.e., MOSPF. In this paper, we will present the operation of AOSPF and the way how an active packet is forwarded based on the active network topology information constructed by AOSPF.