• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.119-122
• /
• 2006

In this study, bottom-up type powder processing and top-down type SPD (severe plastic deformation) approaches were combined in order to achieve full density of 1 vol.% carbon nanotube (CNT)-metal matrix composites with superior mechanical properties by improved particle bonding and least grain growth, which were considered as a bottle neck of the bottom-up method using the conventional powder metallurgy of compaction and sintering. ECAP (equal channel angular pressing), the most promising method in SPD, was used for the CNT-Cu powder consolidation. The powder ECAP processing with 1, 2, 4 and 8 route C passes was conducted at room temperature. It was found by mechanical testing of the consolidated 1 vol.% CNT-Cu that high mechanical strength could be achieved effectively as a result of the Cu matrix strengthening and improved particle bonding during ECAP. The ECAP processing of powders is a viable method to achieve fully density CNT-Cu nanocomposites.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.123-126
• /
• 2006

In this study, bottom-up type powder processing and top-down type SPD (severe plastic deformation) approaches were combined in order to achieve full density of carbon nanotube (CNT)/metal matrix composites with superior mechanical properties by improved particle bonding and least grain growth, which were considered as a bottle neck of the bottom-up method using the conventional powder metallurgy of compaction and sintering. ECAP (equal channel angular pressing), the most promising method in SPD, was used for the CNT/Cu powder consolidation. The powder ECAP processing with 1, 2, 4 and 8 route C passes was conducted at room temperature.

• Macromolecular Research
• /
• v.8 no.3
• /
• pp.142-146
• /
• 2000

Hyperbranched poly(ether sulfone) analogs with the 1,3,5-s-triazine moiety were prepared by the direct polymerization of AB$_2$type monomer, 2,4-bis(4-hydroxyphenyl)-6-(4-(4-(4-fluorobenzenesulfonyl)phenoxy)phenyl)-1,3,5-s-triazine (3). The selective reactivity of three chlorine atoms on cyanuric chloride toward nucleophiles provides an efficient route for the systematic synthesis of AB$_2$type triazine monomers and their hyperbranched polymers. The triazine rings influenced the structural and material characteristics of these hyperbranched polymers. The hyperbranched poly(ether sulfone) analog4 showed a glass transition at 295$^{\circ}C$. and was soluble in THF, 1,4-dioxane, and DMSO. An excellent thermal stability of polymer 4 was exhibited by a TGA analysis, which showed that 5% weight loss occurred at 480$^{\circ}C$.

• Journal of Korea Port Economic Association
• /
• v.22 no.1
• /
• pp.39-59
• /
• 2006

The purpose of this paper is to analyze the competitiveness between Busan New Port and Shanghai's New Yangshan Port, on an island 20 miles off the Chinese mainland coast. For this aim, the paper examines backgrounds of Yangshan Port construction and its related projects, namely, Donghai Bridge and Luchao Logistics Park including operation strategies of Yangshan New Deepwater Port. The main results of this paper are as follows: Busan New Port has competitive advantage over Yangshan Port in terms of ideal location, especially in Asia-North America route, and connection between terminal and hinterland logistics park. Because Busan New Port is operated by fully on-dock system. Nevertheless, Yangshan Port has more strength in its centrality, port tariff and port productivity, which are represented by crane productivity, quay productivity and area productivity. Therefore, Korean ports are recommended by transformation from cargo attraction-type to cargo generation-type port through early activation of port logistics center along with Free Economic Zone.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.980-981
• /
• 2006

In this study, bottom-up type powder processing and top-down type SPD (severe plastic deformation) approaches were combined in order to achieve full density of Carbon nanotube (CNT)/metal matrix composites with superior mechanical properties by improved particle bonding and least grain growth, which were considered as a bottle neck of the bottom-up method using the conventional powder metallurgy of compaction and sintering. ECAP (equal channel angular pressing), the most promising method in SPD, was used for the CNT/Cu powder consolidation. The powder ECAP processing with 1, 2, 4 and 8 route C passes was conducted at room temperature.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.530-537
• /
• 2006

Recently, the railroad route plan is trying to minimize the damage of the local resident which is caused by railroad construction. For this reason, reducing the banking height of soil roadbed, lowering the bridge girder height of a solid intersection and a part of cross river, the through bridge type which can achieve a required span length must apply. The representative through bridges of railroad are arch bridges, truss bridges and plate girder bridges, the through plate girder bridge of variable section can apply that the span length of these bridges is about $30{\sim}50m$, namely, middle span length bridge types, and that can satisfy structural capacity and beauty of railroad at the same time. This paper introduces plan and design process of the Su-eo cheon bridge applied by a through plate girder bridge type of the Jinju-Gwangyang double track 6th construction ordered at Korea Rail network Authority in 2005.

• The Journal of the Korea Contents Association
• /
• v.19 no.12
• /
• pp.398-406
• /
• 2019

This study was conducted to examine the medication non-adherence and related factors based on medication adherence model of older adults that use polypharmacy. A survey was used to collect data from 190 study participants. Among the 190 subjects, 43.2% did not adhere to their polypharmacy intentionally. The reason for medication non-adherence was listed in order of 'when they felt well on symptoms', 'when it was annoying and uncomfortable', and 'when they felt worse due to medication'. Moreover, the older adults often do not seek for medication information actively. Between adherence and non-adherence groups, while there were differences in gender, type of medication, and experience in drug-related side effects, there were no statistically significant differences in medication information contents and route. This study demonstrates that gender, type of medication, and experience in drug-related side effects should be considered to promote medication adherence. In addition, since the elderly with polypharmacy are rarely actively searching for the contents and route of drug information, the contents of drug information need to be provided by the route preferred by the elderly in order to assist in their decision-making process for polypharmacy.

• Transactions on Electrical and Electronic Materials
• /
• v.11 no.4
• /
• pp.155-165
• /
• 2010

As a promising candidate to replace the conventional floating gate flash memories, polysilicon-oxide-nitride-oxidesilicon (SONOS)-type nonvolatile semiconductor memories have been investigated widely in the past several years. SONOS-type memories have some advantages over the conventional floating gate flash memories, such as lower operating voltage, excellent endurance and compatibility with standard complementary metal-oxide-semiconductor (CMOS) technology. However, their operating speed and date retention characteristics are still the bottlenecks to limit the applications of SONOS-type memories. Recently, various approaches have been used to make a trade-off between the operating speed and the date retention characteristics. Application of high-k dielectrics to SONOS-type memories is a predominant route. This article provides the state-of-the-art research progress of high-k dielectrics applicable to SONOS-type nonvolatile semiconductor memories. It begins with a short description of working mechanism of SONOS-type memories, and then deals with the materials' requirements of high-k dielectrics used for SONOS-type memories. In the following section, the microstructures of high-k dielectrics used as tunneling layers, charge trapping layers and blocking layers in SONOS-type memories, and their impacts on the memory behaviors are critically reviewed. The improvement of the memory characteristics by using multilayered structures, including multilayered tunneling layer or multilayered charge trapping layer are also discussed. Finally, this review is concluded with our perspectives towards the future researches on the high-k dielectrics applicable to SONOS-type nonvolatile semiconductor memories.

• Advances in pediatric surgery
• /
• v.13 no.1
• /
• pp.23-29
• /
• 2007

Tapering enteroplasty was first described by Thomas in 1969 as one method of intestinal anastomosis. The advantages of tapering enteroplasty in the intestinal atresia are: First, it makes end-to-end anastomosis possible between the atretic bowel ends with considerable differences in diameters. Second, it promotes the recover of the postoperative bowel function. Third, it prevents the possibility of the short bowel syndrome by eliminating the need of resecting the dilated bowel. A total of 22 patients with intestinal atresia who underwent tapering enteroplasty from January 1988 to December 2005 at our institute were reviewed. In 3 of 22 cases, tapering enteroplasty was the $2^{nd}$ operation after an initial end-to-oblique anastomosis. We reviewed the following items: age, sex, type and location of intestinal atresia, initial feeding and total enteral feeding start day, the length of hospital stay and complications. The average age of the patients was 7 days. Male to female ratio was 1 to 1.2 (10 cases: 12 cases). We performed the tapering enteroplasty on all types and locations of the intestinal atresia from the duodenum to the colon: type I (n=3), type II (n=4), type IIIA (n=7), type IIIB (n=5), type IIIB and IV (n=1), type IV (n=1) and type C (duodenum) and type IIIB and IV (jejunum). On the average, the oral feeds were started on the postoperative $8.8^{th}$ day, and full caloric intake via the enteric route was achieved on postoperative $13.3^{th}$ day. The average length of hospital stay was 19.6 days. There were 1 case (4.5 %) of anastomotic complication and 2 cases (9 %) of adhesive ileus among 22 patients. The tapering enteroplasty on all types of intestinal atresia is a usefull operative method when there are considerable diameter differences between the atretic bowel ends.

• Korean Journal of Veterinary Research
• /
• v.8 no.2
• /
• pp.98-109
• /
• 1968

The small type piroplasma which is known to be prevailing in Korean cattle was injected to un-susceptible hosts such as mice, guinea pigs, rats, rabbits, fowls and developing chicken eggs by i.v., i.p, and intra C.A.M. routes, and its morphological development in each animal species was observed. 1. The small type piroplasma of cattle did not produce any pathogenicity in the experimental animals such as mice, guinea pigs, rats, rabbits, fowls and developing chicken embryos. However, only a partial sign for developing cycle of the organism was observed in the peritoneal fluid. The schizogony of protozoa was not detected in any organs of the inoculated animals. 2. In the animals inoculated, the parasites of I-III types, relative to the process of time in the host, have changed their shapes into IV-VI types and then VI-X types however, the type X was not restored to the type I. In guinea pigs, more grape type was detected then X type in number, and in process of time, the shape was changed from round to elliptic, and the pointed end of the organism appeared in flesh color. 3. None of the organisms were found from the blood stream of inoculated animals excepts only a few piroplasma as were found in the experimental mice shortly after inoculation or i.v. route, No protozoa was also found in the organs of the animals autopsied. 4. The form change of protozoa was more clear in these animals than that in susceptible host. The most piroplasmas have changed their forms into VI-X types 30 hours after inoculation and were dispersed from R.B.C. Tracing of piroplasrna beyond this stage was not attempted. 5. The small type piroplasma comprises in I. X types and it is further believed that VII-X types which were freed from one cell proceeded to invade others. The from of development resembles to the small type of piroplasma which is prevailing in Japan.