• International journal of advanced smart convergence
• /
• v.5 no.3
• /
• pp.47-55
• /
• 2016

Router main task is to provide routing of Internet Protocol (IP) packets. Routing is achieved with help of the IP lookup. Router stores information about the networks and interfaces in data structures commonly called as routing tables. Comparison of IP from incoming packet with the IPs stored in routing table for the information about route is IP Lookup. IP lookup performs by longest IP prefix matching. The performance of the IP router is based on the speed of prefix matching. IP lookup is a major bottle neck in the performance of Router. Various algorithms and data structures are available for IP lookup. This paper is about reviewing various tree based structure and its performance evaluation.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.3
• /
• pp.418-422
• /
• 2005

By introducing spin-coating method to the evaporation induced self-assembly (EISA) process, a simple and reproducible route in controlling the mesophase of silica thin films has been developed for the first time in this work. When a comparatively solvent-rich Si-sol (The atomic ratio of TEOS : F127 : HCl : $H_2O$ : EtOH = 1 : 0.006 : 0.2 : 9.2 : 30) was used as coating solution, the mesophase of resultant silica films was selectively controlled by adjusting the spin-on speed. The cubic mesophase has been obtained from the coating at a low rpm, such as 600 rpm, while the 2-D hexagonal mesophase is formed at a high rpm, such as 2,500 rpm. At a medium coating speed, a mixture of cubic and hexagonal mesophase has been found in the fabricated films. The present results confirm that the evaporation rate of volatile components at initial step is critical for the determination of mesopore structures during the EISA process.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.12
• /
• pp.3583-3589
• /
• 2014

This study evaluated a simple and useful route to the synthesis of mesoporous $TiO_2$ microcapsules with a hollow macro-core structure. A hydrophilic precursor sol containing the surfactants in the hydrophobic solvents was deposited on PMMA polymer surfaces modified by non-thermal plasma to produce mesoporous shells after calcination. The surface of the PMMA polymer spheres was coated with $NH_4F$ and CTAB to control the interfacial properties and promote the subsequent deposition of inorganic sols. These hollow type mesoporous $TiO_2$ microcapsules could be applied as an efficient substrate for the immobilization of DNA oligonucleotides.

• Journal of Plant Biology
• /
• v.13 no.1
• /
• pp.25-32
• /
• 1970

Ecological study on the reclaimed high saline soil was carried out throughout a year(1969) to elucidate the changes of the structure of halophytes communiteis and the possibilities of desalination from high saline soil by absorption of chloride ion. Results from this studies are summarized as followings; 1) The growth rates of halophytes showed a variation; maximum growth rate of Salicornia appeared on August, Chenopodium on July, Suaeda on July, Aster on August and Scirpus on June. 2) Changes of frequency of each halophyte were varied in accordance with species. Chenopodium and Salicornia have the highest frequency of all on May. However, frequency as well as density of halophytes decreased after on May due to competition for absorbing moisture in plant communities. 3) The terrestrial plants which were succeed into the reclaimed tidal land had herborized 25 species on the both side of irrigation route. 4) Each of the maximum chloride uptake by halophytes appeared on May(Salicornia and Aster), on June(Chenopodium and Scirpus), and on August(Suaeda), respectirecely 5) Among the halophytes, Salicornia was confirmed to absorb the highest amount of chloride. A possible amount of chloride uptake by all halophytes per 100 square cm reached about 24,629. ppm.

• Korean Journal of English Language and Linguistics
• /
• v.3 no.3
• /
• pp.341-373
• /
• 2003

A cross-linguistic examination of motion constructions reveals that the nature of the special property of English motion verbs that Tenny (1995) discussed-namely, why English can freely append locational delimiters to manner-of-motion verbs, as in Bill swam/rowed/canoed to the end of the lake -resides not in the verbs but in the semantic structure of the prepositions that denote transition from motion to end location. It is further argued that the differentiation of bounded paths from non-bounded Ones provides a clear-cut basis on which to distinguish motion constructions from resultative constructions. This proposal provides an alternative to the analyses of resultative constructions by Wechsler (1997) and Rappaport Hovav and Levin (2001).

• Structural Engineering and Mechanics
• /
• v.65 no.4
• /
• pp.359-368
• /
• 2018

Dynamic analysis of complex and large structures may be costly from a numerical point of view. For coupled vibroacoustic finite element models, the importance of reducing the size becomes obvious because the fluid degrees of freedom must be added to the structural ones. In this paper, a component mode synthesis method is proposed for large vibroacoustic interaction problems. This method couples fluid subdomains and dynamical substructuring of Craig and Bampton type. The acoustic formulation is written in terms of the velocity potential, which implies several advantages: coupled algebraic systems remain symmetric, and a potential formulation allows a direct extension of Craig and Bampton's method to acoustics. Those properties make the proposed method easy to implement in an existing finite element code because the local numerical treatment of substructures and fluid subdomains is undifferentiated. Test cases are then presented for axisymmetric geometries. Numerical results tend to prove the validity and the efficiency of the proposed method.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.11.1-11.1
• /
• 2010

As one of the non-vacuum, low temperature fabrication route, electrochemical synthesis has been focused for pursuing the cost-effective pathway to produce high efficiency photovoltaic devices. Especially the availability to form the thin film structure on flexible substrate would be the great advantage of electrochemical process. The successful synthesis of the most favorable absorber materials such as CdTe and CIGS has been reported by many researchers, however, the efficiency of electrochemically synthesized could not exceed that from vacuum process, because of microstructural controllability and compositional variation on devices. In this study, we represent the effect of process parameters on the microstructure and composition of compound semiconductor during the synthesis, and propose the photovoltaic characteristics of electrochemically synthesized solar cells.

• Journal of Energy Engineering
• /
• v.24 no.2
• /
• pp.51-54
• /
• 2015

The mesoporous metal organic framework structure of Ni-BTC was successfully synthesized in a low temperature and short operation time via hydrothermal synthesis process. Such operational route virtuously consumed less electrical and thermal energy. It proved time saving along with acceptable product yield (38%). The product was characterized through FESEM, FT-IR, XRD and $N_2$ gas adsorption measurement. Hightemperature stability of synthesized MOF was gauged by diffraction indexing of XRD patterns of as synthesized and heat treated samples of MOFs. The mathematically calculated particle size of Ni-BTC was found to be 42nm.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.8-8
• /
• 2011

During the last half decade, chemically modified graphene (CMG) has been studied in the wide range of applications, such as polymer composites, energy-related materials, sensors, 'paper'-like materials, field-effect transistors (FET), inks, actuators, and biomedical applications due to its excellent electrical, mechanical, and thermal properties. Chemical modification of graphene oxide, which is generated from graphite oxide, which is produced by simple oxidation of graphite, has been a promising route to achieve mass production of CMG platelets via their colloidal suspensions. Graphene oxide contains a range of reactive oxygen functional groups, which renders it a good candidate for use in the aforementioned applications (among others) through chemical functionalizations. In this presentation, I will discuss my recent research activities on the fundamental chemistry of graphite oxide, as well as novel applications based on CMGs. Topics will include the chemical structure of CMGs and colloidal suspensions of CMG platelets, as well as a wide variety of applications.

• The Korean Journal of Ceramics
• /
• v.4 no.4
• /
• pp.352-355
• /
• 1998

Dense $ Pb(Zr, Ti)O_3(PZT)/Al_2O_3$ nanocomposites were prepared by the 28 GHz microwave heating method and conventional electric furnace sintering. Electrical and mechanical properties of the composites were investigated. The fracture strength of the PZT composites with 0.1vol% $Al_2O_3$ was significantly improved in both sintering methods. Smaller grain size and effective reinforcement of the PZT matrix by the second phase were considered to be responsible for the excellent fracture strength. Planar electromechanical coupling factor Kp of the composites sintered by 28GHz microwave heating was higher than that of the materical prepared by the conventional route. It seemed that the control of the reaction between PZT and $Al_2O_3$ by the microwave rapid sintering resulted in the high piezoelectric properties.