• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1B
• /
• pp.68-77
• /
• 2010

Wireless sensor networks are installed in various environments and collect sensing data through wireless links. The quality of a wireless link may be unstable due to environment causes and hardware performance in wireless sensor networks. Since the change of the link quality may cause data loss, sensor nodes need to adaptively estimate the change of the link quality. Also, the routing protocol should deal with this situation. In this paper, the adaptive link quality estimation and routing scheme in the large-scale wireless sensor networks are proposed. When the quality of a link is unstable, sensor nodes agilely estimate the quality of links, and the new route is selected. When quality of a link is stable, the link quality is occasionally estimated so that the energy consumption is reduced. Moreover, sensor nodes exchange less beacons in order to reduce an overhead in dense networks. In the case of sparse network, the sensor nodes exchange more beacons for finding a better route. We prove that the proposed scheme can improve the energy efficiency and reliability.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.235-242
• /
• 2004

For this study, a Peliyagoda area located on a route was selected among many sections of a CKE(Colombo to Katunayake Expressway) route in Sri-Lanka. Its subground consists of a very weak and thick peat soil named amorphous or fibrous peat. All of data, obtained in the design process of soft ground treatment were analyzed to evaluate the settlement characteristics resulted from an embankment load and to present reasonable methods for estimation of secondary compression settlement. For these purposes, soil parameters were used obtainedby field and laboratory tests the settlement analyses were conducted base on the field monitoring results within 20 months. In addition, Reasonable methods were studied to estimate primary consolidation and secondary compression settlement.

• Journal of the Society of Naval Architects of Korea
• /
• v.54 no.2
• /
• pp.143-150
• /
• 2017

Previous methods to evaluate the risk of dropped objects rely on personnel experience of the engineer or operator without analyzed data. However analyzing historical statistic data is the best approach to find the safest operation route and to achieve more reasonable and reliable calculation results. By counting the failure frequency and fatal accident rate the risk can be quantified, and so controlled or mitigated with best economical risk reducing measures. This analysis gives a crane operator with useful information for selecting the best crane operation route, and a designer with an estimation of risk level for the dropped objects from a safety point of view.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.698-699
• /
• 2015

For last three years, our research team have conducted the project named "Development of construction project management technology based on BIM/GIS platform. "We developed construction cost estimation system as well as 3D modeling engine at the first two year and established a web-system which could estimate the benefits of the project and further analyze the economic and financial feasibility of the project. This paper mainly focused on the functions and specifications of web-system. The system was composed of two modules: economic feasibility estimation module and financial feasibility estimation module. While the economic feasibility estimation module determines economic feasibility of the project based on traffic demand forecasting from the public's perspective, the financial feasibility estimation module determine financial viability of the project using toll fee of the road from private entity's perspective. Compared with traditional feasibility study, the proposed system provide users with better flexibility which can make users easily to validate the project upon the change of project environments. The system was also verified with an already accomplished project. The verification showed that proposed system could provide satisfactory accurate results with reduced time and resources.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.2
• /
• pp.597-604
• /
• 2014

In this study, we investigate to show the limitations of current bus arrival time estimation model based on each bus route, and to propose a bus arrival time estimation model based on a bus stop to overcome these limitations. Using the characteristic of bus arrival time calculated on travel time between two bus stops, we develop a model to estimate bus arrival times with the data of all buses traveling the same section regardless of bus route numbers. In the proposed model, an estimated arrival time is calculated by weighted moving average method, and verification between observed value and estimated time is performed on the basis of RMSE. Error was reduced by up to 20% compared to the existing models and the data update period was reduced by more than half that is related to the accuracy of bus arrival time information. We expect to solve the following problems with the suggested method: sudden increase or decrease in arrival time of the bus, the difference of the expected arrival times at the same stop between two or more buses having different route numbers, and impossibility of offering information of a bus if the bus is not operated with the designated schedule.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.1115-1122
• /
• 2013

Recently the demands for traffic information tend to increase, and travel time might one of the most important traffic information. To effectively estimate exact travel time, highly reliable traffic data collection is required. BIS(Bus Information System) data would be useful for the estimation of the route travel time because BIS is collecting data for the bus travel time on the main road of the city on real-time basis. Traditionally use of BIS data has been limited to the realm of bus operating but it has not been used for a variety of traffic categories. Therefore, this study estimates a route travel time on road networks in urban areas on the basis of real-time data of BIS and then eventually constructs regression models. These models use an explanatory variable that corresponds to bus travel time excluding service time at the bus stop. The results show that the coefficient of determination for the constructed regression model is more than 0.950. As a result of T-test performance with assistance from collected data and estimated model values, it is likely that the model is statistically significant with a confidence level of 95%. It is generally found that the estimation for the exact travel time on real-time basis is plausible if the BIS data is used.

• Korean Management Science Review
• /
• v.34 no.1
• /
• pp.1-13
• /
• 2017

The percentage of 3PL (Third-party Logistics), which uses third party businesses to outsource elements of the company's distribution and fulfillment services, is increasing steadily. To provide 3PL service to the customers, it is needed to estimate the total transportation cost and propose the unit cost to the customers. In this paper, we develop a decision support system for estimation of transportation cost of 3PL provider considering various transportation services, such as direct transportation, multi point visiting transportation, and cross docking. The system supports route planning of vehicles by using algorithms based on tabu search and dynamic programming.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.4
• /
• pp.1376-1391
• /
• 2015

In bus delay-tolerant networks, the route of bus is determinate but its arrival time is indeterminate. However, most conventional approaches predict future contact without considering its uncertainty, which makes a limitation on routing performance. A novel approach is proposed by employing interval algebra to characterize the contact's uncertainty and time-varying nature. The contact is predicted by using the Bayesian estimation to achieve a better routing performance. Simulation results show that this approach achieves a good balance between delivery latency and delivery ratio.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.4
• /
• pp.104-114
• /
• 2007

In this paper, an Ad-hoc Routing Protocol that works in wireless Ad-hoc communication networks with multiple radios and multiple channels and that controls call admission based on bandwidth measurement is proposed. Unlike the conventional Ad-hoc node with a single radio using a single channel, an Ad-hoc node of the protocol proposed, the MCQosR(Multiple Channel Quality of Service Routing), has multiple radios and uses multiple channels, which allows full duplex transmission between wireless Ad-hoc nodes, and reduces intra interference on the route. Also, a fixed channel only for reception at each node enables the estimation of the available bandwidth, which is used to control the call admission for QoS provision. The performance of the MCQosR was verified by simulation.

• Journal of the Korean Institute of Navigation
• /
• v.5 no.2
• /
• pp.89-98
• /
• 1981

Presently, there are some means of voyage estimations such as Hire base, Charter base, and Anticpated income and expenditure statement of voyage. The former two are the means of estimation for profit of a ship's voyage per a deadweight tonnage adn a month, and it is well used in the case of chartered ships. But it is somewhat meaningless for the shpowner who runs his ships for himself. The latter means for estimation is mainly used in western shipping, and do not set forth simpler way of comparing profit with another voyage or with another ship's employing in other route. And this paper has yielded an index of ship's voyage profit evaluation by building a model of ship's voyage evaluation formula, and the index may be used in evaluation of the new investigation of shipping as well as setting out a shiop in a voyage. The model has yielded a break even curve which may be used for deciding the amount of demurrage and the period of ship's port time for a specific voyage contraction.