• Ocean and Polar Research
• /
• v.30 no.3
• /
• pp.239-247
• /
• 2008

Spatial distribution of water flow generated by tidal current was investigated within a Zostera marina(seagrass) bed in Wonpo Bay. Water flow and elevation were observed during the seagrass growing season. The spatial distribution of water flow was numerically estimated using roughness coefficient. Water flow inside the seagrass meadow was compared with the observed values. Velocity in Zostera marina vegetated areas was approximately $25{\sim}84%$ lower than that of unvegetated areas. However, flow direction was the same. Intensity of the flood tide diminished appreciably within the seagrass bed, while its pattern was also affected. It is therefore concluded that water flow is influenced by Zostera marina meadows.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.65-65
• /
• 2007

Microstructure and surface roughness of the sensing materials should be improved to use them in advanced sensor applications because the uneven surface roughness degrades the light reflection, pattern resolution, and devices performance. Chemical mechanical polishing (CMP) processing was selected for improving the surface roughness of $CeO_2$ which is one of the well known materials for the oxygen gas sensors. Surface roughness and removal rate of spin coated $CeO_2$ thin films were examined with a change of CMP process parameters such as down force and table speed. The optimized process condition, reflected by the surface roughness with the hillock-free surface as well as the excellent removal rate with the good uniformity, was obtained. The effects of the improved surface roughness on the sensing property of $CeO_2$ thin films were also confirmed. The improved sensitivity of $CeO_2$ thin films for oxygen sensors were obtained after CMP process by the improved surface characteristics. Therefore, we conclude that sensing property of $CeO_2$ thin film is strongly dependent on the surface roughness of $CeO_2$ thin films by using CMP process.

• International Journal of Highway Engineering
• /
• v.19 no.5
• /
• pp.89-96
• /
• 2017

PURPOSES: This study aims to develop a rational procedure for estimating the pavement roughness index considering vehicle wandering. METHODS : The location analysis of the passing vehicle in the lane was performed by approximately 1.2 million vehicles for verification of the wandering distribution. According to verification result, the distribution follows the normal distribution pattern. The probability density function was estimated using each lane's wandering distribution model. Then the procedure for applying a weighted value into the lane profile was conducted using this function. RESULTS : The modified index, MRIw, with consideration towards applying the wandering weighted value application was computed then compared with MRI. It was found that the Coefficient of Variation for distribution of lateral roughness index in the lane was high in the case of a large difference between each index (i.e., MRIw and MRI) observed. CONCLUSIONS : This result confirms that the new procedure with consideration of the weight factor can successfully improve the lane representative characteristics of the roughness index.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.3
• /
• pp.261-264
• /
• 2005

The 90 nm gate pattern technology have been virtualized by employing the hard mask and the planarization of fate poly silicon. We fabricated 70nm poly-Si on $200 nm-SiO_2/p-Si(100)$ substrates using low pressure chemical vapor deposition (LPCVD) to investigate roughness evolution by varying rapid annealing temperatures. The samples were annealed at the temperatures of $700^{\circ}C\~1100^{\circ}C$ for 40 seconds with a rapid thermal annealer. The surface image and the surface roughness were measured by a field emission scanning electron microscopy (FESEM) and an atomic force microscopy (AFM), respectively. The poly silicon surface became more rough as temperature increased due to surface agglomeration. The optimum conditions of poly silicon planarization were achieved by annealed at $700^{\circ}C$ for 40 seconds.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.4
• /
• pp.55-60
• /
• 2010

Rodents can recognize objects by using their whiskers. Not only rodents but also mammals use their whiskers to recognize objects. However, rodents can discriminate surface roughness in micrometer resolution throughout their whisker sensing. Rats can distinguish an target object's shape, roughness and surface pattern by moving their whisker back and forth freely. Mechanoreceptors surrounding the whisker in their follicle measure deflection and vibration of the whisker. In this paper, we designed biomimetic whiskers modeling rodent whiskers and showed the characteristic properties to extract the information of surface roughness.

• Journal of Mechanical Science and Technology
• /
• v.18 no.10
• /
• pp.1849-1858
• /
• 2004

For examining friction-factor characteristics of round-hole pattern surfaces which are usually applied on damper seals, flat plate test apparatus is designed and fabricated. The measurement method of leakage and pressure distribution along round-hole pattern specimen with different hole area is described and a method for determining the Fanning friction factor is discussed. Results show that the round-hole pattern surfaces provide a much larger friction factor than smooth surface, and the friction factor vs. clearance behavior yields that the friction factor generally decreases as the clearance increases unlike the results of Nava's flat plate test. As the hole depth is decreased, the friction factor is increased, and maximum friction factor is obtained for 50% of hole area. Since the present experimental friction factor results show coincident characteristics with Moody's friction factor model, empirical friction factors for round-hole pattern surfaces are obtained by using the Moody's formula based on curve-fit of the experimental data. Results of Villasmil's 2D CFD simulation support the present experimental test result.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1869-1872
• /
• 2003

As SLA(Sterealithography), SLS(Selective Laser Sintering), LOM(Laminated Object Manufacturing), FDM(Fused Deposition Modeling) etc. The FDM system the heart of a study and is developed by Stratasys co. ltd, in US., is small and cheap R.P. The material filament is heated until the material reaches a near-liquid state, it is pumped through a nozzle and become hand with a shape required, and this nozzle move pumping on the previously deposited material. Such FDM system that choice deposition type with X-Y plouter obtain in the thin continue layer by decreasing amount of extrusion or to central the injection amount when the head slow down at the corner, but in the process that fusion wax or resin become hand, deformation occur and it will affect the shape accuracy and the surface roughness. Such effect will depreciate quality and reliability of the product. Therefore, when the product made in actuality, the fundamental study on the basis geometry(surface, volume, line, angle) must be preceded and it have been research by many Free Form Fabrication. So, this basic object study purpose to obtain the fundamental geometry data and to enhance the surface roughness of the shape. And an operant can use the data for the progress of the surface roughness. This study research the estimation and application of the prototype surface roughness by adjustment the injection amount. And basie of this research, describe the pattern of prototype surface roughness and also used the result to estimate the surface of prototype.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.3 no.2
• /
• pp.53-58
• /
• 1998

Ekman layer equation with rough-bottom boundary condition has been solved to determine the effect of roughness on the magnitude of Ekman veering. The bottom boundary condition and the flow field were expanded in a power of roughness (h) which is always smaller than the Ekman layer thickness (${\delta}_E$). By changing the magnitude of roughness parameter (h/${\delta}_E$), the magnitude of the veering, which rotates counterclockwise from the interior geostrophic flow, has been computed. At a fixed depth within the Ekman layer, the magnitude of veering increases as the roughness parameter increases. However, the cross-isobar flux turns out to decrease with increasing roughness. To verify the analytic solution, laboratory experiments were carried out. Rough-bottom cylinderical container filled with homogeneous fluid was sit on a rotating table. The flow pattern during the period of steady spin-up shows that the degree of veering coincides well with the analytic results for various roughness parameters.

• The korean journal of orthodontics
• /
• v.41 no.4
• /
• pp.268-279
• /
• 2011

Objective: The purpose of this study was to compare self-drilling orthodontic mini-implants of different surfaces, namely, machined (untreated), etched (acid-etched), RBM (treated with resorbable blasting media) and hybrid (RBM + machined), with respect to the following criteria: physical appearance of the surface, measurement of surface roughness, and insertion pattern. Methods: Self-drilling orthodontic mini-implants (Osstem implant, Seoul, Korea) with the abovementioned surfaces were obtained. Surface roughness was measured by using a scanning electron microscope and surface-roughness-testing machine, and torque patterns and vertical loadings were measured during continuous insertion of mini-implants into artificial bone (polyurethane foam) by using a torque tester of the driving-motor type (speed, 12 rpm). Results: The mini-implants with the RBM, hybrid, and acid-etched surfaces had slightly increased maximum insertion torque at the final stage ($p$ < 0.05). Implants with the RBM surface had the highest vertical load for insertion ($p$ < 0.05). Testing for surface roughness revealed that the implants with the RBM and hybrid surfaces had higher Ra values than the others ($p$ < 0.05). Scanning electron microscopy showed that the implants with the RBM surface had the roughest surface. Conclusions: Surface-treated, self-drilling orthodontic mini-implants may be clinically acceptable, if controlled appropriately.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.4
• /
• pp.321-326
• /
• 2005

Chemical mechanical polishing(CMP) process is essential technology to be applied to manufacturing the dielectric layer and metal line in semiconductor devices. It has been known that overpolishing in CMP depends on pattern selectivity as a function of density and pitch, and use of fixed abrasive pad(FAP) is one method which can improve the pattern selectivity. Thus, dishing & erosion defects can be reduced. This paper introduces the manufacturing technique of FAP using hydrophilic polymers with swelling characteristic in water and explains the self-conditioning phenomenon. When applied to tungsten blanket wafers, the FAP resulted in appropriate performance in point of uniformity, material selectivity and roughness. Especially, reduced dishing and erosion was observed in CMP of tungsten pattern wafer with the proposed FAP.