• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표대회 논문집(III)
• /
• pp.755-760
• /
• 1998

This study was performed to improve the evaluation of the longitudinal roughness index for various profilometers at airport runway. Especially, a laser type of profilemeter subjected to the longitudinal roughness index has been focused. The test result show that a new type of profile index, IRI(International roughness index) resulted from a laser type of profilometer was profitable for airport runway etc.. The present study provides useful results for the improvement of evaluation of the conventional profile index.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.673-678
• /
• 2002

A satellite remote sensing is useful for vegetation monitoring. But it has some problem. One of these, it is difficult to find a difference of vegetation surface roughness using satellite remote sensing. Each vegetation type has unique surface roughness, for example needle leaves forest, broad leaves forest and grassland. Difference of vegetation surface roughness can be detected by satellite multiangular observation. In this study, objective is to propose index of vegetation surface roughness using BRF property. General vegetation indices are calculated from nadir data of satellite data. A proposed index is calculated from two different observation zenith angle data. Two different zenith data can provide BRF (Bi-directional Reflectance Factor) property of satellite observation data. A proposed index was able to detect different value on where NDVI shows similar high value areas of rice field and forest. This index is useful for vegetation monitoring.

• 터널과지하공간
• /
• 제17권3호
• /
• pp.186-196
• /
• 2007

본 연구에서는 거칠기와 수직응력이 절리면의 전단거동에 미치는 영향을 검토하기 위하여 30개의 자연암반 절리 시료를 대상으로 실험을 실시하였다. 3차원 레이저 거칠기 측정장치를 이용하여 절리면의 거칠기 정보를 측정하였으며, 시료들의 거칠기에 따라 10개씩 세 가지 그룹으로 분류하였다. 다음으로 수직응력을 다섯 단계로 변화시켜가며 전단실험을 실시함으로써 최대전단강도, 잔류전단강도, 전단강성, 팽창특성 등을 조사하였다. 절리면의 거칠기가 증가함에 따라 최대전단강도는 증가하였으며, 거칠기가 최대전단강도에 미치는 영향은 수직응력이 작은 경우에 더욱 크게 나타났다. 또한 절리면의 거칠기가 증가할수록 잔류전단강도도 점차 증가하였다. 전단강성은 거칠기 및 수직응력이 커짐에 따라 증가하는 것으로 나타났으나, 팽창각은 수직응력이 증가할수록 감소하였고, 동일한 수직응력하에서는 절리면의 거칠기가 커질수록 증가하였다.

• 한국도로학회논문집
• /
• 제19권5호
• /
• pp.89-96
• /
• 2017

PURPOSES: This study aims to develop a rational procedure for estimating the pavement roughness index considering vehicle wandering. METHODS : The location analysis of the passing vehicle in the lane was performed by approximately 1.2 million vehicles for verification of the wandering distribution. According to verification result, the distribution follows the normal distribution pattern. The probability density function was estimated using each lane's wandering distribution model. Then the procedure for applying a weighted value into the lane profile was conducted using this function. RESULTS : The modified index, MRIw, with consideration towards applying the wandering weighted value application was computed then compared with MRI. It was found that the Coefficient of Variation for distribution of lateral roughness index in the lane was high in the case of a large difference between each index (i.e., MRIw and MRI) observed. CONCLUSIONS : This result confirms that the new procedure with consideration of the weight factor can successfully improve the lane representative characteristics of the roughness index.

• 한국항공우주학회지
• /
• 제44권7호
• /
• pp.629-639
• /
• 2016

지형상대항법은 측정된 지형고도와 DEM(Digital Elevation Map)의 지형고도의 비교를 통해 위치보정이 이루어지는 시스템이다. 하지만 지형상대항법은 언덕과 같은 반복되는 지형과 같이 측정된 지형고도 프로파일과 후보 지형고도 프로파일이 유사할 때 다른 지형으로 오보정을 유발 할 수 있는 단점을 가지고 있어 항법 성능이 떨어지는 것으로 알려져 있다. 본 논문에서는 이러한 단점을 극복하기 위해 관심영역 안에 주변 지형의 유사한 정도를 판단하는 영역기반 지형 기울기 험준도 지수를 적용하였고[11], 영역기반 지형 곡률 험준도 지수를 제안하였다. 제안한 지형 험준도 지수의 성능 검증을 위하여 기존의 궤적기반 지형 험준도 지수와 영역기반 지형 험준도 지수를 달착륙선의 지형상대항법에 적용한 시뮬레이션을 수행하였다. 그 결과, 기존의 궤적기반 지형 험준도 지수를 고려하였을 때 보다 영역기반 지형 험준도 지수를 고려하였을 때 지형상대항법 성능이 개선됨을 확인하였다.

• 사상체질의학회지
• /
• 제22권4호
• /
• pp.20-29
• /
• 2010

1. Objectives Our goal is to observe the feasibility of constitution discrimination from computing quantitative roughness index from dynamic friction coefficients and their gradients with the measurement device of skin friction with 3-Axis load cell sensor. 2. Methods In the traditional Korean medicine, skin diagnosis is one of the examination methods to discriminate Sasang constitution since it was known that Tae-eumin has rough skin, and Soyangin has smooth one. It is based on the skin roughness on the back of one's hand for the discrimination. The measurement device of skin friction with 3-axis load cell sensor has been developed in order to provide quantitative skin roughness through dynamic friction coefficients. The effective interval of the coefficients is obtained from the automatic sampling algorithm to use their curvature and slope. Then, Fisher's discriminant function of them makes the discrimination. 3. Results The success rate of extracting the effective interval was about 90% and the discriminant accuracy between Tae-eumin and Soyangin was 70% and 68% for men and women, respectively. The entire methods showed the possibility to distinguish between Tae-eumin and Soyangin by using stochastic properties of roughness index, which can make the entire system to include the measurement, the computation of the roughness index and the discrimination of constitution automatical. 4. Conclusions The measurement device, the automatic sampling algorithm of dynamic friction coefficients and the constitution discrimination algorithm were developed, respectively, and their combination can become the serial and automatic procedure for quantitative and objective skin diagnosis, which mimics the movement of the Oriental medical doctors' skin diagnosis. It can be applied to healthcare as well as the diagnosis of constitution in a u-Health system soon.

• 펄프종이기술
• /
• 제38권5호
• /
• pp.47-53
• /
• 2006

To meet the ever increasing quality demand of coated papers and duplex boards, the local gloss variation and print unevenness must be avoid. To do this, surface roughening phenomenon which affects local gloss and print unevenness was investigated. In this study, the effect of roughness and densification of sheet obtained at various calendering conditions on surface roughening was examined. To evaluate the calendering effect properly we introduced a new value of roughening index by moisture for evaluation of surface roughening. Caliper and roughness of sheet decreased with increasing of calendering temperature and pressure, and the remarkable reduction of those properties occurred at the temperature around Tg. Roughening index increased when the amount of water increased and calendaring temperature and pressure increased. And as the sheet became denser by calendering, the roughening index increased to some extent. But roughening index by moisture is the lowest for sheet precalendered at higher temperature condition. When the surface of calendered sheet is rougher, there is more roughening of surface. The severe condition of calendering made the roughening index by moisture small.

• 융합신호처리학회논문지
• /
• 제21권3호
• /
• pp.127-132
• /
• 2020

본 연구에서는 장애인의 이동을 방해하는 도로 경사와 같은 물리적 장벽을 제거하는 데 필요한 정보를 제공하는 일련의 과정을 진행한다. 실험을 통해 고령층, 장애인이 안전하게 목적지로 이동하는데 필요한 IoT 기반 시스템 구현이 가능하도록 하는 정량화된 노면 평탄도 지수를 구현한다. 이를 위해 사전 연구로 자이로스코프를 이용한 노면 측정 장치를 고안하였다. 본 연구에서는 주행 중 노면의 거칠기, 평탄도를 확인하기 위해 자이로스코프로부터 X, Y변위, 가속도변위 세 가지 변수를 계측하였고 측정된 데이터의 연산과정을 통해 노면의 거칠기와 평탄도를 0 ~ 100으로 정량화하는 1차 가공 과정을 수행하였다. 이를 다시 4단계로 구분하여 지도에 표시하여 사용자에게 제공할 수 있는 알고리즘을 구현하였으며, 최종적으로 장애인 및 노인 전동휠체어 사용자가 기본 이동성을 확보할 수 있는 시스템을 구축하였다.

• 대한소아치과학회지
• /
• 제23권4호
• /
• pp.915-924
• /
• 1996

The purpose of this paper is to investigate the surface roughness of glass ionomer cement during initial setting time followed by applying surface coating agent. No other finishing or polishing procedure is done and each surface coating agents (varnish, adhesive, gloss, sealant) are used after filling of glass ionomer cement. Surface roughness indices(Ra) are measured and surface contours are obtained electronically by Surfcorder SEF-30D(Kosaka laboratory Ltd., Japan). The results are as follows: 1. During initial setting time, surface roughness increases slightly regardless of surface coating agents. But it is statistically insignificant. (p>0.05) 2. Among surface coating agents used, Ra indices of group using varnish are high significantly compared to other groups regardless of elapsed time.(p<0.05) Among the groups which has used other surface coating agents except for the varnish group, similar Ra index all over the experiment is obtained, when compared to control group (no agent). 3. If no surface treatment is performed, tri-cure glass ionomer cement (Vitremer) has higher Ra Index than light cure glass ionomer cement (Fuji II LC) (t<0.05). But there is no difference between two groups in Ra index if any kinds of agents are applied except for sealant. (t>0.05)

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.706-708
• /
• 2003

Index for difference of vegetation surface roughness (BSI: Bi-directional reflectance factor structure Index) was proposed in our laboratory (Konda et al., 2000). It is thought that BSI is useful vegetation index for vegetation monitoring. If it can be applied for global covered satellite data, detailed monitoring of global vegetation can be expected. However, in order to apply BSI to global satellite data, there are some problems to be solved. In this study, in order to make global data set of BSI, it arranged about processing of the global satellite data for making BSI data sets.