• 한국항행학회논문지
• /
• 제27권3호
• /
• pp.269-273
• /
• 2023

본 연구는 K-UAM 로드맵[1]을 바탕으로, 초기 UAM 조종사 교육훈련 커리큘럼 구성에 필요한 주요 교육훈련 과목을 선정하기 위해 수행하였다. 현재 UAM 기체는 VTOL 기능을 중심으로 수직 이착륙이 가능한 회전익 항공기와 유사한 특성을 갖는다. 따라서 본 연구에서는 회전익 비행교육을 대표하는 육군항공학교의 회전익 조종사 양성 교육 커리큘럼을 비교군으로 선정하여 초기 UAM 조종사 양성을 위한 교육훈련 과목을 선정하였다. 먼저 육군의 회전익 조종사 교육훈련 과목을 바탕으로 AHP 설문을 위한 계층구조를 설계하였으며 각 계층의 전문가들을 선별하여 AHP 설문을 수행하였다. AHP 분석을 통해 우선순위로 부여한 교육훈련 과목을 초기 UAM 조종사 훈련에 적용한다면 교육훈련 효과와 궁극적으로 UAM의 안전운항에 기여할 것으로 본다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.380-385
• /
• 2001

The paper presents a new multidisciplinary design optimization architecture using optimal sensitivity and coordination of interdisciplinary design variables. Original design problem is decomposed into a number of sub-problems that represent individual engineering analysis. The coupled effects between sub-problems are computed by interdisciplinary design variables. System level coordination is determined by optimal parameter sensitivity calculated by finite difference method. The proposed. MDO strategy is applied to a simplified model of rotorcraft blade design associated with structures and aerodynamic disciplines.

• 소음진동
• /
• 제10권2호
• /
• pp.229-239
• /
• 2000

To reduce the drag rise on the advancing helicopter rotor blade tips, the tip of the blade is modified to have sweep, anhedral and pretwist. The equations of motion of rotor blade with these tip angles were derived using Hamilton principle, programmed using FORTRAN and named as ARMDAS(Advanced Rotorcraft Multidisplinary Design and Analysis System). Rotating frequency analysis of rotor blades with swept tipe was performed that is necessary in conceptual and preliminary design phases of the helicopter design. Vibration analysis of non-rotating blades was also accomplished and compared with MSC/NASTRAN resutls for the basis of comparison with the vibration test data. The rotating frequency analysis of blades with an actual rotor blade data was also performed to verify coded program and to check the possibility of a resonance of an actual rotor blade at the specific rotating speed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.734-735
• /
• 2008

Shock absorber for rotorcraft landing gear should absorb landing impact during landing and isolate vibration to fuselage during taxiing. Double stage oleo-pneumatic shock absorber is known to have better performances than single stage oleo-pneumatic shock absorber. This paper deals with the z-direction translational acceleration at mass center, roil and pitch angular acceleration of fuselage for single and double stage oleo-pneumatic shock absorber at nose landing gear when a 6DOF rigid model is taxiing on the pound.

• 한국항공운항학회지
• /
• 제13권2호
• /
• pp.14-26
• /
• 2005

A tilt-rotor aircraft has various flight modes : helicopter, airplane, and conversion. Each of flight mode has unique and nonlinear flight characteristics. Therefore the gain schedules for whole flight envelope are required for effective flight performance. This paper proposes collective, flap, and nacelle angle scheduler for whole flight envelope of the Smart UAV(Unmanned Air Vehicle) based on CAMRAD(Comprehensive Analytical Model of Rotorcraft Aerodynamics and Dynamics) II analysis results. The scheduler designs are improved so that the pitch attitude angle of helicopter mode was minimized. The range of scheduler are reduced inside of engine performance limits. The conversion corridor and rotor governor are suggested also.

• 한국항공우주학회지
• /
• 제35권6호
• /
• pp.548-555
• /
• 2007

기존의 헬리콥터 모델링은 주로 많은 가정들을 통한 수식 전개에 의존해 왔기 때문에 모델링이 어렵고, 특정 구간에서만 활용 가능하며, 모델링 구성이 바뀌면 많은 수정이 거쳐야 한다는 단점들이 제기되어 왔다. 본 연구에서는 다물체 동역학 기법을 적용한 헬리콥터 시뮬레이션 프로그램을 개발하여 AH-1 헬리콥터에 대한 모델링을 수행하였고, 또한 시뮬레이션 결과를 비행 시험 데이터 및 상용 헬리콥터 시뮬레이션 분석 도구인 FLIGHTLAB과 비교하여 그 가능성을 확인해 보았다.

• 한국항공운항학회지
• /
• 제15권1호
• /
• pp.18-25
• /
• 2007

The safety should be primarily considered for air vehicle, such as helicopter, which is not easy to cope with when out of order or loss of control that followed catastrophe. The U.S National Transportation Safety Board (NTSB) investigated and analyzed for 34 years rotorcraft accidents that occurred from 1963 through 1997. This paper handles intensively the relative investigation and analysis of recent 10 years domestic civil helicopter accidents to those of the United States in order to increase the safety of helicopter transportation and to consider the main design parameter before we develop Korean Civil Helicopter. To understand the overview of civil turbine helicopter accident, it uses the NTSB's accident investigation results and the overall accident trend for U.S civil single and twin turbine engine helicopter according to category, cause, activity, and phase of operation.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2012년도 춘계학술논문집 2부
• /
• pp.649-652
• /
• 2012

회전익항공기의 연료셀 내부는 연료보관 및 연료를 엔진으로 공급하기 위한 배관과 구성품들이 배치되어 있다. 특히, 기동헬기는 전장에서 사용되는 헬기로써, 수 km 고도에서 비행하는 고정익기보다 비행고도가 낮기 때문에 피탄될 가능성이 높다. 따라서, 항공기의 생존성을 극대화하기 위해서는 피탄시 유체내부 상승압력에 의한 내부 LRU 가 받는 영향성을 검토하여 설계되어야 함은 주지의 사실이다. 그러나, 내탄시험은 연료셀 자체의 제작비용 및 준비기간이 상당히 소요되고, 실탄사용에 따른 시험수행의 제약 때문에 수치모사를 통한 관련 데이터의 확보가 필요하다. 이를 위해 본 연구에서는 유체-구조 수치모사 프로그램인 Autodyn을 이용하여 회전익항공기 연료셀의 내탄 수치모사를 수행하여, 피탄 후 연료셀 내부에서의 탄 거동을 분석하고 유체내부의 압력과 연료 셀 자체의 등가응력을 평가하였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제8권1호
• /
• pp.1-9
• /
• 2007

As a first step toward a complete CFD-CSD coupling for helicopter rotor load analysis, the present study attempts to loosely couple a CFD code with a source-double panel method. The far-field wake effects were calculated by a time-marching free vortex wake method and were implemented into the CFD module via field velocity approach. Unlike the lifting line method, the air loads correction process is not trivial for the source-doublet panel method. The air loads correction process between the source-doublet method and CFD is newly suggested in this work and the computation results are validated against available data for well-known hovering flight conditions.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.1-1
• /
• 2010

With the power of supercomputers increasing exponentially, there is an insatiable need for more advanced multi-disciplinary aerospace CFD simulations. A particular current interest is the 3D viscous turbulent simulation of the highly nonlinear aspects of aero-icing. The applications of CFD in that field are literally light-years behind aerodynamics, with a significant number of users still mired in correlations, or 2D, inviscid, incompressible, and, yes, Panel Methods simulations! Thus, the disparity of tools between aerodynamics and icing departments within an organization leads to a disconnect that makes ice protection a downstream isolated process that is not an integral part of the aerodynamic behavior of an aerospace system (aircraft, rotorcraft, jet engine, UAV, etc.). While 3D RANS has been recently introduced, it is still considered computationally too demanding for industry when wide parametric studies for certification are required. In addition, not unlike the situation in aerodynamics say 20 years ago, naysayers are at every corner claiming that CFD is not reliable and is of limited use.