• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 제2회 학술대회 논문집 일렉트렛트 및 응용기술전문연구회
• /
• pp.36-39
• /
• 2000

This paper presents the technology of condition diagnosis & life estimation on insulation system of the traction motor. In the non-destructive methods for diagnosis of coil insulation state, residual dielectric strength is estimated by the D-map which consist of the partial discharge quantity Q and average degradation degree $\Delta$. In the operating history of machine, the N-Y life estimation method is based on the stop-starting numbers and operating times with considering each degradation factor by the thermal, electrical and heat-cycle stress. With the on-line conditioning monitoring on the currents of traction motors, detecting the abnormal operating state due to bearing faults, stator or armature faults, eccentricity related faults and broken rotor bars can be performed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.164-167
• /
• 2005

In this paper, the design and characteristics of a ${\pi}-shaped$ ultrasonic motor which is applicable to optical zoom operation of lenssystem for mobile phone are investigated. Its desi후 and simulation of performances are carried out by FEM (finite element method) commercial software. As a simulation result, by applying voltage with single phase, a combined vibration is produced at the surface of an arm of stator. The prototype of motor is fabricated and its outer size is 8*4*2 $mm^3$ including the cylindrical steel rod of 2 mm in diameter as rotor. The motor exhibits a maximum speed of 500 rpm and a power consumption of 0.3 W when driven at 20 Vpp and 64 kHz.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.37-39
• /
• 2004

This paper deals with the prediction of armature reaction field produced by 3-phase stator windings whose current waveform contains significant harmonics. On the basis of 2-d analytical technics, we derived governing equation and predicted magnetic field distribution according to rotor position. The results of predictions from the analysis are compared with corresponding FE (finite element) analyses.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.36-38
• /
• 1995

A Single-phase condensor motor is analyzed by FEM coupled with external circuit. The finite element analysis is based on the solution of combined equation both the magnetic field equation from the Maxwell's and the circuit equations of the stator and rotor circuit. The external circuit of the single-phase condensor motor to be analyzed is described using FLUX2D and linked to multiple FEM regions. The simulated results show that the condensor motor analysis with external circuit has good agreement with those of test results.

• Journal of Electrical Engineering and Technology
• /
• 제10권3호
• /
• pp.1035-1047
• /
• 2015

Starting from a new dynamic system description novel synchronous machine deterministic observers are proposed. Reduced and full order adaptive observer variations are presented. Based on the feedback linearization control law and the use of deterministic observer a novel control system is built. It meets the requirements of high performance tracking system. Adaptivity to stator and rotor resistance and the torque sensorless application is included. The comparison of the proposed novel control with conventional linear and nonlinear control systems is discussed. The given simulational study includes complete drive system integration.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.53-55
• /
• 2008

In high speed applications, the slotless permanent magnet(PM) motors appear an attractive solution, being almost insensitive to magneto-motive force harmonics and to pulse width modulation(PWM) current ripple and exhibiting lower stator iron losses and rotor losses (significant with square wave current control). So, this paper deals with methods for design of permanent magnet synchronous motor/generator.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.810-811
• /
• 2015

In this paper, we investigate the optimization design for a spoke type motor with the characteristics of high torque density and high-efficiency. This motor has a high output per unit volume. In order to reduce noise and vibration caused by a high cogging torque, optimization design of the rotor and stator have been conducted using both Response surface method (RSM) and Finite elements method (FEM). In this paper, we show the potential for this motor to efficiently replace existing interior permanent magnet synchronous motors (IPMSM) in a wide range of industries.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.916-917
• /
• 2015

This paper deals with electromagneitc characteristics analysis of high-speed brushless DC motor. First, under same rated and restricted conditions, four models which have different slot combinations each other are designed using 2-d finite element (FE) analyses. Designed models are analyzed and compared in terms of core loss, copper loss, eddy-current loss, etc. On the basis of analysis results, it is found that the motor with a 2-pole PM rotor and a 6-slot stator has most outstanding performances in electromagnetic aspects.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.862-863
• /
• 2015

This paper presents an improved estimation procedure for the contribution to no-load flux linkage created by the permanent magnet (PM) in interior permanent magnet synchronous machines. In the proposed method, the saturation effect in stator and rotor cores are taken into account by utilizing the frozen permeability method (FPM). This improved procedure can evaluate the contribution for each local element in the PM to the no-load flux linkage. According to the analysis results, an effective PM topology optimal design can be carried out to achieve high utilization ratio of PM in the machine. In order to determine the threshold of the low contribution of PM for removing, one multi-objective optimization model is proposed. Based on the optimal threshold, the final optimal topology design of PM can be achieved.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 춘계종합학술대회
• /
• pp.469-473
• /
• 2001

This paper describes a rotation-type field mill to measure the electric field intensity caused by thunderclouds on the ground level. The field mill developed is consisted of two isolated electrode vanes, a grounded stator and a rotor. To develop a high sensitive field mill, the principles and design rules of a rotation-type field mill are studied. Also, two types of calibration system, such as a cylindrical guard electrodes and a parallel-plate electrodes, are proposed to determine the sensitivity and frequency bandwidth of the field mill. From the calibration experiment, the frequency bandwidth and the sensitivity of the field mill arc DC ∼ 200 [MHz] and 0.267 [mV/Vm], respectively. Therefore, it can measure the electric field intensity from 73[V/m] to 18.7[kV/m].