• 한국전산유체공학회:학술대회논문집
• /
• 2010.05a
• /
• pp.341-346
• /
• 2010

In this paper, viscous flow calculation of pump-jet that is used as underwater propulsor was made by using RANS equation. For the validation, calculation for DTRC4119 marine propeller was made and reasonable agreements were obtained between the present results and the experiment. An unstructured overset mesh technique is used for analysis of relative motion between rotor and stator in pump-jet propulsor. Results for pump-jet propulsor were compared with computational results of another researcher.

• Journal of the KSME
• /
• v.25 no.5
• /
• pp.425-430
• /
• 1985

하수 처리장에 사용되는 펌프는 엄격한 사양 및 성능 보장이 필요하므로 펌프 효율이 높아야 하며, 실적에 의한 사양 제시, 엄격한 검사 제도 및 기준이 이루어져야 한다. 그러나 현재로서는 국내에서 설계 제작면에서 경험과 실적이 부족하나 앞으로 많은 하수처리장에서 펌프가 소요 되며, 상수도용 펌프와 비교할 때 중소형의 경우에는 고가인 것을 감안하면 볼류트형(volute type)의 슬러지 펌프는 상수용 펌프에서의 경험을 바탕으로 기술 개발에 힘을 기울이고 전무제 작자를 육성하여 기술 축적 및 적절한 설비가 구비되도록 하여 실질적인 품질보증이 이루어지 도록 하여야 한다. 또한 특수펌프인 프로그레싱 캐비티 펌프나 스크류우 펌프에 대하여는 경 험이 부족하므로 프로그레싱 캐비티 펌프의 경우 로우터(rotor)와 스테이터(stator)를 수입하여 조립하거나 스크류유 펌프의 경우 기술 제휴를 통한 기술 개발을 이룩하는 방법을 택할 수도 있을 것이다. 현재 중소제작소에서 일부 기종에 대하여 외국인에 의한 중소기업진흥공단 주관의 단기간 기술지도를 받고 있으나 이에 대한 기술개발을 위하여는 전문기관과 장기적인 기술협력과 기술양성에 대한 투자가 이루어지고 전문업체가 육성되어야 할 것이나 이로서 중요 설비인 펌 프의 국산화가 조기에 달성되고 외화절약 및 기술정착이 이루어질 것이다.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.603-606
• /
• 2002

Numerical analysis and its inverse design process of 2nd stage of JT8D aircraft engine is described. One of the most important factors that affect the performante of turbomachine is secondary flow in the blade passage, so that the performance of turbomachine can be improved by controlling secondary flow. In this paper, as a method to control secondary flow, commercial inverse design program, TurboDesign is used. Meridional derivative of angular momentum is selected as a parameter to control blade leading in this program, To validate inverse designed model, computational analysis is applied which includes rotor-stator-interaction. In this paper, CFB results of both original and inverse designed model are compared to examine how much the performance improves without reduction of work output.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.1
• /
• pp.95-102
• /
• 2007

The issues of preventive and condition-based maintenance, online monitoring, system fault detection, diagnosis and prognosis are of increasing importance. This study introduces a technique to detect and identify faults in induction motors. Stator currents were measured and stored by time domain. The time domain is not suitable for representing current signals, so wavelet transform is used to convert the signals onto frequency domain. The raw signals can not show the significant feature, therefore difference values between the signal of the health conditions and that of the fault conditions are applied. The difference values were transformed by wavelet transform and the features are extracted from the transformed signals. The dynamic time warping method was used to identify the fault type. This study describes the results of detecting fault using wavelet analysis.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.1
• /
• pp.34-41
• /
• 2009

In this paper, a novel MR brake with permanent magnet is developed. This system consists of rotary disk, permanent magnet, spring and MR fluid. Permanent magnets are attached to the rotary disk and moves in the direction of radius. The magnets are linked to rotor axis by spring. As rotation speed increases, the magnets move outward from the center of the system by centrifugal force in the MR fluid. A proper design of stator or case makes the system have unique torque characteristics. The research is performed like following procedures. First, the electromagnetic characteristic of the system is analyzed using Maxwell. Next, torque is calculated using the results of the electromagnetic analysis. Finally, the performance of various types of the brake systems are investigated and compared with each other.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.379.1-379
• /
• 2002

In this paper the leakage prediction and rotordynamic analysis of an annular seal with a smooth rotor and spiral-grooved stator are performed. For developing a theoretical model, the three-control-volume analysis of the circumferentially-grooved seal is expanded by considering pressure reduction due to the pumping effect of spiral groove and pressure flow through the spiral groove. Validation to the present analysis is achieved by comparisons with available experimental data. (omitted)

• Journal of international Conference on Electrical Machines and Systems
• /
• v.2 no.1
• /
• pp.31-39
• /
• 2013

This paper presents small signal stability analysis of a doubly fed induction generator (DFIG) based wind farm including series dynamic braking resistor (SDBR) connected at the stator side. A detailed mathematical model of wind turbine, DFIG machine and converters and SDBR is presented in this paper to derive the complete dynamic equations of the studied system. Small signal stability of this system is carried out by modal and sensitivity analysis, participation factors and eigenvalue analysis. Finally, this paper presents an analysis of the dynamic behavior of DFIG based wind farm under voltage dip condition with and without SDBR.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.05a
• /
• pp.74-75
• /
• 2010

Inflow broadband noise is generated when turbulence in the rotor wakes impinges on the downstream stator vanes. In this paper a three-dimensional model is developed to investigate the broadband noise due to turbulence-cascade interaction. In the newly-developed model, we consider the effects of incident turbulent gust component in span-wise direction on the inflow broadband noise. The quasi-three-dimensional theory is deduced based on the tonal analytic theory of Smith (1972) and two-dimensional broadband noise generalization by Cheong et al. (2006; 2009). Extending the modified LINSUB code, quasi-three-dimensional computational results are presented. Finally, we compare these computational results with time-domain results to validate the theory.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.10
• /
• pp.107-113
• /
• 2002

To monitor the torque of an induction motor using current, rotating speed has been measured and used to calculate the slip angular velocity. Additional sensor, however, can cause extra expense and trouble. In this paper, a new algorithm is proposed to monitor the torque of vector controlled induction motor without any speed measuring sensor. Only stator current is measured to estimate the magnetizing current which is used to calculate flux linkage, rotor velocity and motor torque. Graphical programming is used to implement the suggested algorithm and to monitor the torque of an induction motor in real time. To solve the fluctuation problem of estimated torque caused from instantly varying rotating speed of an induction motor, the rotating speed is reconstructed based on the measured current signals. From several experiments, the proposed method shows a good estimation of the motor torque under the normal rotational speed.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.8
• /
• pp.126-131
• /
• 2015

The accuracy of motor parameter measurement is necessary to improve the performance of vector control of an induction motor. The rotor time constant affects the performance of controller and also the resistance and leakage inductance of stator are very important design parameters of current and speed controller. In this paper a new modified motor parameter measurement methods for high performance speed control of vector control of an induction motor are proposed.