• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.9
• /
• pp.3184-3189
• /
• 2010

To develop gasoline engine fuel pump, it is needed to measure the rotational speed of the pump. In general, because gasoline fuel pump is submerged in the fuel tank, it is difficult to measure the rotational speed directly. Currently, there are two popular methods measuring the rotational speed. One of them is using a piezoelectric accelerometer, and the other is using a current sensor. Originally, a piezoelectric accelerometer had been applied to measure the frequency of the motor vibration. A current sensor is measuring current frequency of the commutator slot. In this study, both the piezoelectric accelerometer and the current sensor have been applied on the fuel pump to calculate the rotational speed at the same time. As a result, the current sensor delivered highly accurate rotational speed information compared with that of the piezoelectric accelerometer. Especially, low rotational speed region, the current sensor shows very robust measuring characteristics. To measure the rotational speed within 1% error, the piezoelectric accelerometer needs to be set with less then 0.5Hz datum storage interval, and the current sensor needs to be set with less then 2.0Hz datum storage interval.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.694-699
• /
• 2005

This paper deals with a control technique of eliminating the transient vibration of a geared mechanical system. This technique is based on a model-based control with a rotational speed sensor in order to establish the damping effect at the driven machine part. A rotational speed sensor is installed in a driven gear, namely a bull gear. A control model is composed of a reduced-order mechanical part expressed as a transfer function between the rotational speed of the motor and that of the bull gear. This control model estimates a load speed after the rotational speed of the bull gear is acted on the transfer function. The difference between the estimated load speed and the motor speed is calculated dynamically and it is added to the velocity command to suppress the transient vibration generated at the load. This control technique is applied to a dies driving spindle of a form rolling machine. In this paper, the performance of this control method is examined by simulations. The settling time of the residual vibration generated at the loading inertia can be shortened down to about 1/2 of the uncompensated vibration level.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.774-776
• /
• 2001

This paper describes the finite element analysis(FEA) for the design of common core-type and separated core-type rotational speed sensor(RSS) for SMART MCP and compared with the low/ high speed characteristics of prototype RSS. As a result, it is shown that the characteristics of prototype RSS have a good agreement with the results of FEA.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.12 s.255
• /
• pp.1596-1602
• /
• 2006

In this paper, a hybrid sensor is proposed that has two capabilities: the first is to sense longitudinal or flexural transient vibration signals selectively which are transmitted along the target shaft, and the second to measure the rotating speed of the shaft. All measurements are made in a non-contact manner since this sensor uses magnetostriction as its measuring principle. The signal selection between two vibration modes requires only electrical switching operations and the switching between these two sensing capabilities-vibrations and rotational speed-are accomplished by a very simple mechanical operation. To verify the capabilities of the proposed sensor, a prototype sensor is fabricated and the experiments are made. The results show this sensor can embody two sensing capabilities in one sensor configuration.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.227-230
• /
• 1999

In this paper, the machining characteristics of high speed ball end milling affected by the rotational error of high speed spindle using air bearing are investigated. The error motions of a spindle have generally influenced on the surface roughness, the form accuracy, the tool life, etc. in end milling. Experiments are carried out over a wide range of rotational speeds(10,000-50,000rpm). The rotational errors of the spindle are measured by the gap sensor mounted on the spindle shaft at various cutting speeds. The relations between the surface roughness and the spindle error motion are presented. Results show that the rotational accuracy of the spindle directly affects the surface roughness of the machined surface.

• 제어로봇시스템학회:학술대회논문집
• /
• 1998.10a
• /
• pp.413-418
• /
• 1998

We often use induction motor in the hard environment including vibration and high ambient temperature, or in maintenance free operation, because induction motor has durable and simple structure. However, when we use it as servo actuator or accurate speed control motor, we have to equip sensor such as encoder and tachogenerator with the motor control system. And generally those sensor's abilities against bad environment are less than the induction motor itself, So if we can remove these sensors from the system, it'll have more environmental resistance, and the cost will also be reduced. Actually this removal has been achieved in limited field. However, that needs complex calculations and a certain elapse time for data processing. In our study, we intended to estimate the rotational speed from the motor current instead of speed sensor, easily and rapidly in comparison to former methods.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.4
• /
• pp.418-424
• /
• 2009

This work is the attempt to give qualitative explanations to complex magnetic phenomena which are observed in the previously proposed magnetostrictive sensor capable of ultrasonic waves and rotational speed measurement. The law of approach is adopted as analysis tool in order to account for some extraordinary output patterns and proved to be effective. The distance between the anhysteretic curve current magnetic state and the variation of anhysteretic curve by stress mainly determine the sensor output shapes and their uniqueness. It is also experimentally verified that the precisely determined bias magnetic field strength can not only remove the unusual output parts but also maximize its sensitivity.

• Journal of KSNVE
• /
• v.5 no.4
• /
• pp.483-492
• /
• 1995

For evaluation of rotational accuracy performance of high speed machine tool spindle system, the characteristics of main spindle and tool motion behavior are presented by means of three point accuracy testing method. The results of experiments and analyses are as follows: (1) The high speed spindle rotational accuracy can be evaluated by the combination of the spindle and tool motion behavior. (2) The spindle motion behavior increases up to more that 4 times the tool motion behavior. (3) For the influence of oil viscosity on spindle and tool taper application, 32 cSt of oil viscosity showed the most satisfactory result for rotational accuracy. (4) In order to improve the rotational accuracy of high speed machine tool spindle system, it is needed to reduce the combination error. This can be achieved by improving the working accuracy and supplying the proper lubrication with contact area at the spindle and tool.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.183.1-183.1
• /
• 2010

본 논문에서는 풍력발전기의 회전속도센서의 고장 발생 시 고장을 검출하고 회전속도센서의 사용 없이 Sensorless 제어로의 전환에 관한 연구를 기술하였다. 최근 풍력발전은 급속한 성장함에 따라 풍력발전기의 대형화 및 해상풍력화 추세에 있다. 특히 해상풍력발전은 바람 및 설치장소의 제약에서 벗어나는 이점에 반해 염해, 습도 및 파도에 의한 진동 발생으로 센서의 고장 발생률이 높을 것으로 예상된다. 이에 따라 풍력발전기의 회전속도센서 고장 발생 시 이를 검출하는 방법을 제시하였다. 또한 회전속도센서의 고장이 검출되면 회전속도센서를 이용한 풍력발전기 제어방식에서 Sensorless 제어로의 전환을 통해 안전하게 풍력발전기를 운전할 수 있도록 하였다. 연구된 제어기법은 PSIM을 이용한 시물레이션을 통해 결과를 검증하였다.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.4
• /
• pp.349-358
• /
• 2019

This paper aimed at collecting sensor signals to extract characteristic parameter of the rotor. A vibration test rig has been developed to perform model tests. Signal characteristics were analyzed when driving normally. Envelope FFT Analysis is used to extract vibration components caused by periodic impacts from other vibration factors. Signal analysis was performed when load changes were given to speed sensors and vibration test rigs that show low frequency characteristics of the rotor and signal analysis according to rotational speed. The acceleration signal measured in the bearing housing has a small amplitude and produces only the rotational frequency component and harmonic component of the motor. As the number of rotations increases, the amplitude of acceleration can be seen. As the rotational speed increases, it can be seen that there is a difference in the shape of the original data and compared with the acceleration FFT graph, it can be seen that the noise is strong at low frequencies and the corresponding rotational frequency components are clearly represented. It can be seen that changing the load does not increase the main rotational frequency component.