• Structural Engineering and Mechanics
• /
• 제39권1호
• /
• pp.21-46
• /
• 2011

The natural frequencies of continuous systems depend on the governing partial differential equation and can be numerically estimated using the finite element method. The accuracy and convergence of the finite element method depends on the choice of basis functions. A basis function will generally perform better if it is closely linked to the problem physics. The stiffness matrix is the same for either static or dynamic loading, hence the basis function can be chosen such that it satisfies the static part of the governing differential equation. However, in the case of a rotating beam, an exact closed form solution for the static part of the governing differential equation is not known. In this paper, we try to find an approximate solution for the static part of the governing differential equation for an uniform rotating beam. The error resulting from the approximation is minimized to generate relations between the constants assumed in the solution. This new function is used as a basis function which gives rise to shape functions which depend on position of the element in the beam, material, geometric properties and rotational speed of the beam. The results of finite element analysis with the new basis functions are verified with published literature for uniform and tapered rotating beams under different boundary conditions. Numerical results clearly show the advantage of the current approach at high rotation speeds with a reduction of 10 to 33% in the degrees of freedom required for convergence of the first five modes to four decimal places for an uniform rotating cantilever beam.

• Smart Structures and Systems
• /
• 제9권2호
• /
• pp.105-125
• /
• 2012

A modified Pagano method is developed for the three-dimensional (3D) free vibration analysis of simply-supported, multilayered functionally graded material (FGM) circular hollow cylinders with a constant rotational speed with respect to the meridional direction of the cylinders. The material properties of each FGM layer constituting the cylinders are regarded as heterogeneous through the thickness coordinate, and then specified to obey a power-law distribution of the volume fractions of the constituents, and the effects of centrifugal and Coriolis accelerations, as well as the initial hoop stress due to rotation, are considered. The Pagano method, which was developed for the static and dynamic analyses of multilayered composite plates, is modified in that a displacement-based formulation is replaced by a mixed formulation, the complex-valued solutions of the system equations are transferred to the real-valued solutions, a successive approximation method is adopted to extend its application to FGM cylinders, and a propagator matrix method is developed to reduce the time needed for its implementation. These modifications make the Pagano method feasible for multilayered FGM cylinders, and the computation in the implementation is independent of the total number of the layers, thus becoming less time-consuming than usual.

• Structural Engineering and Mechanics
• /
• 제13권2호
• /
• pp.135-154
• /
• 2002

This paper presents the convected material frame approach to study the nonlinear behavior of inelastic frame structures. The convected material frame approach is a modification of the co-rotational approximation by incorporating an adaptive convected material frame in the basic definition of the displacement vector and strain tensor. In the formulation, each discrete element is associated with a local coordinate system that rotates and translates with the element. For each load increment, the corresponding strain-displacement and nodal force-stress relationships are defined in the updated local coordinates, and based on the updated element geometry. The rigid body motion and deformation displacements are decoupled for each increment. This modified approach incorporates the geometrical nonlinearities through the continuous updating of the material frame geometry. A generalized nonlinear function is used to derive the inelastic constitutive relation and the kinematic hardening is considered. The equation of motion is integrated by an explicit procedure and it involves only vector assemblage and vector storage in the analysis by assuming a lumped mass matrix of diagonal form. Several numerical examples are demonstrated in close agreement with the solutions obtained by the ANSYS code. Numerical studies show that the proposed approach is capable of investigating large deflection of inelastic planar structures and providing an excellent numerical performance.

• Steel and Composite Structures
• /
• 제47권1호
• /
• pp.1-17
• /
• 2023

This paper deals with the free vibration behavior of rotating composite beams reinforced with carbon nanotubes (CNTs) under uniform thermal loads. The temperature-dependent beam material is assumed to be a mixture of single-walled carbon nanotubes (SWCNTs) in an isotropic matrix and five different functionally graded (FG) distributions of CNTs are considered according to the variation along the thickness, namely the UD-uniform, FG-O, FG-V, FG-Λ and FG-X distributions where FG-V and FG-Λ are unsymmetrical patterns. Considering the Timoshenko beam theory (TBT), a new finite element formulation of functionally graded carbon nanotube reinforced composite (FGCNTRC) beam is created for the first time. And the effects of several essential parameters including rotational speed, hub radius, effective material properties, slenderness ratio, boundary conditions, thermal force and moments due to temperature variation are considered in the formulation. By implementing different boundary conditions, some new results of both symmetric and non-symmetrical distribution patterns are presented in tables and figures to be used as benchmark for further validation. In addition, as an alternative advanced composite application for rotating systems exposed to thermal load, the positive effects of CNT addition in improving the dynamic performance of the system have been observed and the results are presented in several tables and figures.

• 한국전산구조공학회논문집
• /
• 제17권1호
• /
• pp.21-30
• /
• 2004

본 연구에서는 유한요소법을 이용한 채널단면을 갖는 복합재료 적층 구조물의 자유진동을 다룬다. 복합적층 절판구조물에 고차항 판이론을 적용하기 위하여 개발된 유한요소 프로그램은 Lagrangian 및 Hermite 보간함수를 병용하여 면내회전각 자유도를 포함한 절점 당 8개의 자유도를 갖는다. 전단보정계수의 가정을 필요로 하지 않고 전단변형의 3차항 비선형 특성이 고려된 본 논문의 절판 요소는 국부좌표계와 전체좌표계에 대한 좌표변환행렬에 의하여 요소 당 32×32의 국부요소행렬로 구성된다. 본 해석 프로그램의 결과는 기존의 고전적 이론 및 일차항 이론에 의한 문헌 결과와 비교ㆍ분석하였으며, 화이버 보강각도, 길이-두께비, 기하학적 형상 변화 등의 다양한 매개변수 연구를 수행하였다. 본 연구에서는 특히 경계조건 및 길이-두께비 변화에 따라 예측하기 힘든 복잡한 거동을 보이는 복합적층 채널단면 구조물의 자유진동에 대하여 정밀한 고차항 이론 적용에 의한 엄밀 해석의 필요성을 제기하였다.

• Structural Engineering and Mechanics
• /
• 제68권3호
• /
• pp.299-312
• /
• 2018

In this paper, an extended finite element method is proposed to analyze both geometric and material non-linear behavior of general Functionally Graded Material (FGM) plate-shell type structures. A user defined subroutine (UMAT) is developed and implemented in Abaqus/Standard to study the elastoplastic behavior of the ceramic particle-reinforced metal-matrix FGM plates-shells. The standard quadrilateral 4-nodes shell element with three rotational and three translational degrees of freedom per node, S4, is extended in the present study, to deal with elasto-plastic analysis of geometrically non-linear FGM plate-shell structures. The elastoplastic material properties are assumed to vary smoothly through the thickness of the plate-shell type structures. The nonlinear approach is based on Mori-Tanaka model to underline micromechanics and locally determine the effective FGM properties and self-consistent method of Suquet for the homogenization of the stress-field. The elasto-plastic behavior of the ceramic/metal FGM is assumed to follow Ludwik hardening law. An incremental formulation of the elasto-plastic constitutive relation is developed to predict the tangent operator. In order to to highlight the effectiveness and the accuracy of the present finite element procedure, numerical examples of geometrically non-linear elastoplastic functionally graded plates and shells are presented. The effects of the geometrical parameters and the volume fraction index on nonlinear responses are performed.

• 한국산학기술학회논문지
• /
• 제14권11호
• /
• pp.5385-5391
• /
• 2013

온라인을 기반한 제품의 구매가 활성화 됨에 따라, 소비자들의 제품 디자인에 대한 사실적이고 정확한 정보를 요구하고 있다. 본 연구에서는 제품의 형상정보(3D mesh)와 색/질감정보(image)를 이용하여 텍스쳐 맵핑된 실사적 3차원 모델을 생성하는 효율적인 방법을 제안한다. 3 차원 형상정보에 대응하는 이미지 상의 텍스쳐 좌표 관계를 구하기 위해 오브젝트 좌표계와 카메라 좌표계 사이의 변환행렬, 카메라의 초점거리, 카메라 CCD 와 프레임상의 이미지 사이의 종횡비를 파라미터로 하는 2D-3D 정합을 수행한다. 이러한 2D-3D 정합에 있어 발생하는 연산의 복잡도와 비선형도를 낮추기 위하여, 카메라 내부파라미터 검정단계, 임의의 회전행렬에 대한 임시적 최적 이동 벡터 (TOTV), 회전행렬에 대한 비선형 최적화 단계로 접근한다. 제안하는 방법의 유용성을 시현하기 위해 3차원 컬러 측정기로는 색외관을 획득하기 힘든 메탈릭 페인트 재질로 이루어진 제품에 적용한 구현결과를 보인다.

• Structural Engineering and Mechanics
• /
• 제15권1호
• /
• pp.83-114
• /
• 2003

A new simple 3-node triangular flat-shell element with standard nodal DOF (6 DOF per node) is proposed for the linear and geometrically nonlinear analysis of very thin to thick plate and shell structures. The formulation of element GT9 (Long and Xu 1994), a generalized conforming membrane element with rigid rotational freedoms, is employed as the membrane component of the new shell element. Both one-point reduced integration scheme and a corresponding stabilization matrix are adopted for avoiding membrane locking and hourglass phenomenon. The bending component of the new element comes from a new generalized conforming Kirchhoff-Mindlin plate element TSL-T9, which is derived in this paper based on semiLoof constrains and rational shear interpolation. Thus the convergence can be guaranteed and no shear locking will happen. Furthermore, a simple hybrid procedure is suggested to improve the stress solutions, and the Updated Lagrangian formulae are also established for the geometrically nonlinear problems. Numerical results with solutions, which are solved by some other recent element models and the models in the commercial finite element software ABAQUS, are presented. They show that the proposed element, denoted as GMST18, exhibits excellent and better performance for the analysis of thin-think plates and shells in both linear and geometrically nonlinear problems.

• 한국전산구조공학회논문집
• /
• 제31권4호
• /
• pp.207-213
• /
• 2018

본 연구에서는 건물 실내 공간 정보 획득을 위해 Microsoft사의 $Kinect^{(R)}$ v2를 활용한 point cloud 기법을 도입하였다. 카메라로 취득한 2차원의 투영 공간 이미지 픽셀 좌표를 각 카메라의 보정을 거쳐 3차원 이미지 변환하며 이를 토대로 공간 정보를 구현하였다. 기준점을 중심으로 $360^{\circ}$ 회전하여 취득한 3차원 이미지를 통해 거리 측정이 불가한 기존의 2차원 이미지의 한계를 개선하였으며, 이 과정을 통해 얻은 point cloud를 통해 3차원 map을 형성하였다. 형성된 3차원 map은 기존의 공간정보 융 복합을 위한 센서와 비슷한 수준의 측정 효율을 가지면서 동시에 렌즈 왜곡 현상에 대한 후처리 과정을 통해 공간 정보를 정확하게 측정할 수 있도록 하였다. 측정한 결과를 2D 도면과 실제 공간 및 구조부재의 길이 및 위치 등과 비교하여 검증하였다.

• 수산해양기술연구
• /
• 제27권4호
• /
• pp.303-312
• /
• 1991

직선상 2층 구조물의 임의의 절점에 변위벡터가 불연속인 죠인트 요소를 갖는 경우, 면내 굽힘 자유진동을 해석하기 위한 알고리즘을 전달영향계수법에 의해 정식화하고, 간단한 모델에 의해 수치실험을 행한 결과, 다음과 같이 요약할 수 있다. (1) 전달영향계수법은 종래의 전달매트릭스법에 비해 계산정도 및 계산속도 양면에서 우수함을 확인할 수 있다. (2) 구조물의 임의의 중간 절점에서 상태벡터량(횡변위, 각변위, 전단력 및 모멘트 등) 중 일부의 물리량이 불연속성을 갖더라도, 알고리즘 자체를 변화시켜야 하는 전달매트릭스법과는 달리, 스프링전수 값의 조절만으로 간단히 처리할 수 있어, 알고리즘의 일반화 및 프로그램의 범용화가 가능하다. (3) 전달영향계수법에서는, 구조물의 중간에 반고정지지와 같은 단단한 탄성지지부가 다수 존재하는 경우에도, 기본적인 알고리즘을 변경할 필요 없이 전단 및 회전 스프링정수에 적당한 값을 대입하는 것만으로 중간조건에 대응시킬 수 있고, 모든 경계조건도 마찬가지로 처리할 수 있다.