• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.3
• /
• pp.63-69
• /
• 2013

This paper related with the performance of SE-MMA (Signed-Error MMA) that is the reduction of computational operation number in algorithm than MMA blind eualization algorithm which are possible to elimination of intersymbol interferance in the band limited and time dispersive nonlinear communication channel. In MMA algorithm which are possible to reduction of amplitude and phase rotation by intersymbol interference that is occurred in channel without using the training sequence, it uses the error signal that is the difference of the equalizer output and constant modulus, the statisticlly characteristic of transmitted signal. But in SE-MMA, it uses the polarity of the error signal, then it is possible to reduce the updating the tap coefficient and to simplify the H/W implementation. The computer simulation were performed in order to compare the performance of SE-MMA and conventional MMA algorithm. For this, the recovered signal constellation that is the output of the equalizer, the convergence performance by MSE, MD (maximum distortion) and residual isi characteristic learning curve, SER were used. As a result of simulation, the SE-MMA has more fast convergence speed than the MMA. But in the other index after reaching the seady state, it gives more worst performance values in the used index.

• Journal of Convergence for Information Technology
• /
• v.10 no.9
• /
• pp.43-52
• /
• 2020

The purpose of this study is to develop video exercise education for patients with shoulder-joint and evaluate the effects on range of motion, pain and quality of life. This study was conducted in 30 experimental groups and 26 control groups among shoulder-joint patients who were admitted to orthopedic outpatient clinics at university hospitals in G city from January to June 2020. For data analysis, SPSS was used to analyze the general characteristics of the two groups and the pre-homogeneity test for the dependent variables by 𝑥²-test and t-test. As a result of the study, the subject's pre-post score change was found to have a significant difference in the degree of internal rotation of the range of motion and pain score, but there was no significant difference in the flexion, abduction degree of the range of motion and quality of life. In this study, clinical application of video education can be suggested as a way to improve nursing practice as it saves time spent on patient education of nurses not only in outpatients but also in wards.

• The korean journal of orthodontics
• /
• v.22 no.3 s.38
• /
• pp.491-507
• /
• 1992

Biennial serial cephalometric radiographs of 47 children (26 boys, 21 girls) were used to analyze the craniofacial growth changes in Korean children from 8 years to 16 years of age. A craniofacial model was designed for this study. It consisted of 72 anatomical points and 98 derived points. The craniofacial changes of these samples during these ages might be summarized as follows: 1. Mandibular growth to cranial base was more forward than maxillary growth. 2. Mandibular growth during this period was found to be a forward-upward (bite closing) rotation of the mandible. 3. Growth changes in total mandibular length (Ar-Gn) showed a pubertal growth spurt at 12-14 years of age in boys and 10-12 years of age in girls. Synchrony of the growth spurts on total mandibular length (Ar-Gn) and standing body height was found. 4. The pubertal spurts occured in the growth of total cranial base (Ba-Na) at 10-12 years of age in boys and 8-10 years of age in girls. The time of the spurts of the cranial base growth was 2 years ahead of that of the total mandibular growth. 5. Synchrony of growth spurts in anterior facial height (Na-Me), posterior facial height (S-Go) and body height was found. 6. The whole craniofacial changes during this period were plotted by using a X-Y plotter and personal computer. A simple profilogram for an diagnostic tool was obtained.

• The Korean Journal of Applied Statistics
• /
• v.31 no.4
• /
• pp.427-446
• /
• 2018

Korea will have a super-aged society within only 30 years according to the United Nations' definition of an aging society and the statistics on Korea's Population projections (2016), indicates that Korea has the fastest ageing speed in the world. There is a lack of data on long-term time-series data on death as related to pension and welfare policies compared to the rapid rate of aging. This paper estimates life expectancy over 245 years (from 1955 to 2200) through past and future forecasts as well as compares the expected life expectancy of the synthetic cohort and the real cohort. In addition, an international comparisons were made to understand the level of aging in Korea. Estimates of the back-projection period were compared with previous studies and the LC model to improve accuracy and objectivity. In addition, the predictions after 2016 reflected the declined mortality rate effect of Korea using the LC-ER model. The results showed an increase in life expectancy of about 30 years over 60 years (1955-2015) with an expected life expectancy of the real cohort over the second century (1955-2155) higher than the synthetic cohort. The comparative advantage of life expectancy of real cohorts was confirmed to be a common trend among comparative countries. In addition, Japan and Korea have a higher life expectancy and starting from 85 to 90 years old, all comparative countries show that the growth rate for the life expectancy of synthetic and real cohorts is less than previous years.

• Journal of the Korean Society of Costume
• /
• v.30
• /
• pp.85-99
• /
• 1996

This study has been made to examine the symbolic meaning of our traditional costume colours based on the theory of yin-yang Wu-hsing the interaction of yin and yang with the rotation of the five agents wood firt earth metal and waters. Presenting the spirt and the life of our race the costume culture has been keep-ing its own systematic symbol. Being sensible the colour has to be under-stood as the colour sense therefore the cos-tume colour has begun to have the symbolic meaning with the feeling or the mental value. According to the theory of yin-yang wu-hsing the costume colour has presented our racial sprit way of thinking and way of life for a long time and it has become the tra-ditional culture at last. Based on the doctrine of cosmic harmony through the motion of yin and yang or the passive and active elements are their five agents form the material force of everything. The order of nature has its counterpart in five symbolic costume colours wood-blue ; fire-red: earth-yellow; metal-white: water-black. The five colours are called the primary colours. which produce the next compound colours. Accepted in the social system as well as the social stats the costume colour has set up systematically. The theory of Yin-yang Wu-hsing has given the five colours the symbolic meanings and its mainstream has been the function of Sangsaeng and Sangeuk which are genera-ted by the power of virture. The former is mu-tually beneficial while the latter destructive. The colour as a costume colour has been made distinction between the colour of the up-per classes and the colour of the middle and lower classes and the specific colour has presented the symbolic meanings. The yeollow the red and the purple have been regarded as the colour of king queen and upper classes Being the colour recognition the costume colour has been established by the society and the race generally Implied the spiritual elements the colour recognition could select the lucky colour in accordance with one's des-tiny. Besides the colour recognition has begun to appear as the racial costumes to protect the society and to pray for good fortune. According to the theory of Yin-yang Wu-hsing the costume colour has been forming through our long history and has become our costume culture. Therefore the colour of the costume has signified not only the colour sense but also the important symbolic meanings.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.30 no.1
• /
• pp.83-91
• /
• 2008

The goal of reconstruction following ablative therapy for intraoral cancer is the restoration of form and function to permit a return to activities of daily life. Traditional reconstruction includes split thickness skin grafts, myocutaneous flaps and, more recently, various free flaps. Free flaps provide higher level of functional recovery relative to that seen with other techniques but require the complexity of the technique and microvascular anastomosis and thus, extended surgical time and occasionally a second team for harvesting. The platysma myocutaneous cervical flap is a possible alternative for intraoral reconstruction. It is thin and pliable like the tissue provided by the radial forearm free flap. It can be harvested with enough tissue to close most head and neck ablative defects. There is virtually no donor site morbidity involved. This study evaluated 7 patients affected by intraoral squamous cell carcinoma (SCC). All patients underwent the resection of intraoral SCC with neck dissection and subsequent intraoral reconstruction with the superiorly based platysma myocutaneous cervical flap. Flap-related complications occurred in 3 patients. Adjuvant radiation therapy was performed in 3 patients. Average follow-up was 24.1 months after surgery, with a range of 8 to 42 months. All patients presented self assessment of discomfort associated with intraoral recipient sites and cervical donor sites. However, the neck function measured by two-inclinometer technique was within the normal range during relatively long term follow-up period. Our study concluded that superiorly based platysma myocutaneous cervical flap is good alternative to free flaps, especially for relatively smaller defects and for the defects appropriate for the rotation arc of the flap.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.2
• /
• pp.242-254
• /
• 2016

This paper is the forth investigation on the evaluation methods of flow characteristics in a steady flow bench. In the previous works, it was concluded that the assumption of the solid rotation might cause serious problems and both of the eccentricity and the velocity profile distort the flow characteristics when using the ISM at 1.75B plane. Also particle image velocimetry (PIV) measurement at this position showed that the real velocity profile was far from the assumption of ISM evaluation. In this paper, the planar velocity profiles were measure from 1.75B to 6.00B position by PIV and the characteristics were examined according to the valve angles and lifts for further investigations about the effect of the position on the velocity profile. The results show that $26^{\circ}$ valve angle is always an unique exceptional case in all aspects. If the valve angle is $21^{\circ}$ and below, the planar velocity profiles according to the lift and the position are similar to each other, however, the tangential velocity curves along with the radial direction have common tendencies up to $16^{\circ}$ angle. Also the well arranged swirl behaviors are generally observed at the position above 3.00B and the velocity contour lines come closer to the concentric circle as the valve lift increases. In addition, the gradient of tangential velocity along with the radial direction from the swirl center becomes stable and constant as the position goes downstream. Concurrently the velocity gradient is larger to the eccentric direction of the center. In the meantime the tangential velocity curves along with the radial direction are irregular and various at 1.75B, however, they become regular and reach higher level as the evaluation position goes downstream. At this time the curves of 4.50B are the best fitted to the ideal one. On the other hand in an exceptional case, $26^{\circ}$, the velocity contours are very complicated over 6mm valve lift regardless the position and the gradient increases to the opposite direction of the eccentric center. Also, 6.00B is a best fitting position in the geometrical cylinder center base. With respect to the swirl center, the distribution range of centers for 1.75B is different to that for the other positions and the eccentricities of this plane are larger regardless the valve angle. After 1.75B, there is no certain tendency in the center position change according to the valve angle and lift. Additionally, the eccentricities are not sufficiently small to neglecting the effect on ISM measurement.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.3
• /
• pp.199-207
• /
• 2013

In hydrographic survey, data surveyed with multibeam system includes various errors due to multiple factors. These are corrected by a calibration called patch test, and if existing method is used, the test needs to be conducted for about 8 times for precise system calibration. For more prompt and precise multibeam system calibration, the exact offset of a ship was determined using terrestrial laser scanning and TS surveying, which was used as the initial input for the patch test. In the result, the error of closure was 0.001 m or less for TS surveying and backsight error was 0.005 m or less for scanning. All the surveying data based on the same local coordinate was converted into vessel reference coordinate during which R-square for all rotation angles was 0.99 or higher and standard deviation was 0.008 m or less. Finally, in a patch test using calculated offset of sensors and motion sensor offset, the offset of MBES transducer satisfied manual on hydrography only with 1-time calibration. With these results, it is thought that terrestrial laser scanning and TS surveying can fully be utilized for multibeam system calibration.

• Parasites, Hosts and Diseases
• /
• v.21 no.2
• /
• pp.234-240
• /
• 1983

The pathogenicity of free-living amoeba, Waegleria fcwleri, is influenced according to the strain, cultural condition and host (Culbertson et at., 1968; Carter, 1970; Wong et at., 1975), Phillips (1973) demonstrated that Entamoeba histolytica became avirulent after more than 2 year maintenance in axonic culture in vitro. This study was carried out to compare the difference in pathogenicity between two strains of N. fowleri, one of a prolonged maintenance in arsenic medium and the other one obtained by serial brain passage in mice. The 0 strain was that N. fowleri had cultivated axenically more than 7 years in CGVS medium. The 2-1 strain was obtained from the brain of mouse inoculated intranasally with a strain, which was from the mouse brain infected with 0 strain, and cultured for 15 weeks until the beginning of this experiment. White male mice weighing 18-22 g were used. Mice were anesthetized by an intraperitoneal injection of about 1 mg secobarbital, and inoculated intranasally with $10{\times}$10^4 live N. fowleri trophoBoites in a $5{\;}{\mu}l$ cell suspension. Sluggish behaviour, nervousness, rotation and leg paralysis were developed earlier and more frequently in the 2-1 experimental group than the control 0 group. Pathological changes such as inflammatory and necrotic lesion were observed in the olfactory and anterior portion of brain, and these changes were more extensive in the 2-1 group. The edematous and inflammatory changes in lung were demonstrated in mice died after 13th day post-inoculation. The experimental mice of 2-1 group began to die suddenly from 7th day post-inoculation, and the survival time in 2-1 group mice was shorter than 0 group mice. The typical primary amoebic meningoencephalitis was developed in the mice inoculated intranasally with N. fowleri. The prolonged maintenance of N. fowleri amoebae in axonic CGVS medium was observed to have lost their original pathogenicity for mice, but their pathogenicity was restored by serial brain passage in mice.

• 대한공업교육학회지
• /
• v.35 no.2
• /
• pp.82-111
• /
• 2010

The goal of this paper was to understand the skill-up experiences of ex-participants of the customized training program in Technical High Schools for Small and Medium Business during first 2 years in Company through qualitative interviews with 3 purposefully selected ex-participants. Their core skill-up experience in this period was assumed as the shift from' dependent worker' to 'independent worker' on the base of literature review. The results of this study were following : 1. The small and medium companies offered a few formal training for newcomers, production-site orientation through short job rotation, linking them with skilled workers and job manuals or job standards. 2. Authentic skill-up experiences were combined with a structured reprimand, peer learning, deep learning through reflection on one's own experiences. 3. There were a few handicap conditions that disturbed their skill-up activities: the skilled worker don't open their skill toward new corner; the ex-participants in company had no time to learn anything meaningful to up-grade their competency.