• Journal of Multimedia Information System
• /
• v.2 no.2
• /
• pp.193-206
• /
• 2015

In this paper a new approach for image encryption based on quadruple encryption with dual chaotic maps is proposed. The encryption process is performed with quadruple encryption by invoking the encrypt and decrypt routines with different keys in the sequence EDEE. The decryption process is performed in the reverse direction DDED. The key generation for the quadruple encryption is achieved with a 1D Circle map. The chaotic values for the encrypt and decrypt routines are generated by using a 2D Henon map. The Encrypt routine E is composed of three stages i.e. permutation, pixel value rotation and diffusion. The permutation is achieved by: row and column scrambling with chaotic values, exchanging the lower and the upper principal and secondary diagonal elements based on the chaotic values. The second stage circularly rotates all the pixel values based on the chaotic values. The last stage performs the diffusion in two directions (forward and backward) with two previously diffused pixels and two chaotic values. The security and performance of the proposed scheme are assessed thoroughly by using the key space, statistical, differential, entropy and performance analysis. The proposed scheme is computationally fast with security intact.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.2
• /
• pp.50.1-50.1
• /
• 2010

The New Solar Telescope (NST) at Big Bear Solar Observatory (BBSO) is the recently constructed world largest 1.6 m optical solar telescope on the ground. We took an observation of the north polar limb in H-alpha line center wavelength on 2009 August 26 with the instrument at Nasmyth focus of the NST and found a remarkable small-scale H-alpha eruption from 18:20 UT and 18:45 UT. The eruption occurred with a relatively slow speed of about 10 km/s in early stage and a slight acceleration up to 20-30 km/s in later stage. We also found that the eruption shows a deflection along the pre-existing magnetic field as well as several interesting features such as bifurcation, rotation, horizontal oscillation, and direction and thickness change of its structure during the eruption. In this talk, we will report the observational properties of the small-scale eruption observed by the NST and discuss their implication on magnetic reconnection.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.8
• /
• pp.681-689
• /
• 2013

The commercial tools to simulate the non-linear dynamic characteristics of wind turbine system are various but, the tool take much time to simulate the control algorithm and require many input variables. In this paper, the procedures to derive the simplified 4-degree-of-freedom mathematical model of a 2-MW wind turbine which could be used at the initial design stage of the controller are proposed based on RISO's suggested method. In this model, the 1st tower fore-after bending motion and 1st blade flapping motion are also considered in addition to the rotor-generator rotation motion in the 2-DOF model. The effectiveness of the 4-DOF model is examined comparing with the 2-DOF model and verification of the simplified model is accomplished through modal analysis for whole wind turbine system.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.sup1
• /
• pp.159-164
• /
• 2001

Reduction cranioplasty is one of the treatment modality among many treatment options for macrocephaly with hydrocephalus. The most previous techniques of reduction cranioplasty have some disadvantages such as difficult airway maintenance, pressure sore due to modified prone position, severe venous infarct due to obstruction of venous blood flow and large amount of bleeding from the dissection of superior sagittal sinus to obtain bone fragment needed. A 28-month-old girl had extreme macrocephaly. She couldn't control head rotation and keep sitting position. The operation was performed at supine position with adequate exposure of entire calvarium and the hinge was made in occipital bone fragment that covered posterior part of superior sagittal sinus. Bleeding volume and the other complications were decreased and acceptable reduction was achieved with this method.

• Archives of Plastic Surgery
• /
• v.46 no.5
• /
• pp.480-483
• /
• 2019

Repairing surgical defects of the nose is still challenging due to its tridimensional shape and its aesthetic concern. Difficulty in reconstructing nasal subunits lies in their contour, skin texture and limited availability of adjacent skin. For lower nasal dorsum and supra-tip regions, we design a new combined local flap as existing local flaps may give disappointing results. This combination flap was performed on two patients for reconstruction of the lower nasal dorsum area after basal cell carcinoma excision. Size of the excision ranged from 20 to 25 mm diameter and safe margins were obtained. The defects were reconstructed with a local flap that combined a rotation nasal flank flap and a V-Y advancement nasolabial flap. Excision and reconstruction were performed in a one-stage surgery under intravenous sedation and local anesthesia. There were no postoperative complications and no flap loss occurred. Aesthetic and functional results after 6 months postoperatively were satisfying without modification of nasal shape. This flap is reliable and offers interesting functional and aesthetic outcomes. It can be considered as a new reconstruction alternative for supra-tip and lower nasal dorsum skin defects performed in a one-stage procedure under local anesthesia.

• Nuclear Engineering and Technology
• /
• v.54 no.1
• /
• pp.357-373
• /
• 2022

The high-temperature gas-cooled reactor pebble-bed module project is the first commercial Generation-IV NPP(Nuclear Power Plant) in China. A new joint is used for the vertical support of RPV(Reactor Pressure Vessel). The steel corbel is integrally embedded into the reactor-cabin wall through eight asymmetrically arranged pre-stressed high-strength bolts, achieving the different path transmission of shear force and moment. The vertical monotonic loading test of two specimens is conducted. The results show that the failure mode of the joint is bolt fracture. There is no prominent yield stage in the whole loading process. The stress of bolts is linearly distributed along the height of corbel at initial loading. As the load increases, the height of neutral axis of bolts gradually decreases. The upper and lower edges of the wall opening contact the corbel plate to restrict the rotation of the corbel. During the loading, the pre-stress of some bolts decreases. The increase of the pre-stress strength ratio of bolts has no noticeable effect on the structure stiffness, but it reduces the ultimate bearing capacity of the joint. A simplified calculation model for the elastic stage of the joint is established, and the estimation results are in good agreement with the experimental results.

• Journal of Distribution Science
• /
• v.13 no.9
• /
• pp.103-112
• /
• 2015

Purpose - This paper aims to provide a step-by-step approach to factor analytic procedures, such as principal component analysis (PCA) and exploratory factor analysis (EFA), and to offer a guideline for factor analysis. Authors have argued that the results of PCA and EFA are substantially similar. Additionally, they assert that PCA is a more appropriate technique for factor analysis because PCA produces easily interpreted results that are likely to be the basis of better decisions. For these reasons, many researchers have used PCA as a technique instead of EFA. However, these techniques are clearly different. PCA should be used for data reduction. On the other hand, EFA has been tailored to identify any underlying factor structure, a set of measured variables that cause the manifest variables to covary. Thus, it is needed for a guideline and for procedures to use in factor analysis. To date, however, these two techniques have been indiscriminately misused. Research design, data, and methodology - This research conducted a literature review. For this, we summarized the meaningful and consistent arguments and drew up guidelines and suggested procedures for rigorous EFA. Results - PCA can be used instead of common factor analysis when all measured variables have high communality. However, common factor analysis is recommended for EFA. First, researchers should evaluate the sample size and check for sampling adequacy before conducting factor analysis. If these conditions are not satisfied, then the next steps cannot be followed. Sample size must be at least 100 with communality above 0.5 and a minimum subject to item ratio of at least 5:1, with a minimum of five items in EFA. Next, Bartlett's sphericity test and the Kaiser-Mayer-Olkin (KMO) measure should be assessed for sampling adequacy. The chi-square value for Bartlett's test should be significant. In addition, a KMO of more than 0.8 is recommended. The next step is to conduct a factor analysis. The analysis is composed of three stages. The first stage determines a rotation technique. Generally, ML or PAF will suggest to researchers the best results. Selection of one of the two techniques heavily hinges on data normality. ML requires normally distributed data; on the other hand, PAF does not. The second step is associated with determining the number of factors to retain in the EFA. The best way to determine the number of factors to retain is to apply three methods including eigenvalues greater than 1.0, the scree plot test, and the variance extracted. The last step is to select one of two rotation methods: orthogonal or oblique. If the research suggests some variables that are correlated to each other, then the oblique method should be selected for factor rotation because the method assumes all factors are correlated in the research. If not, the orthogonal method is possible for factor rotation. Conclusions - Recommendations are offered for the best factor analytic practice for empirical research.

• Korean Journal of Soil Science and Fertilizer
• /
• v.27 no.2
• /
• pp.98-104
• /
• 1994

Effects of paddy-upland rotation system on nutrients distribution in soil profile and nutrient balance were studied in paddy fields from 1989 to 1993. The obtained results are summarized as follows. 1. $NO_3{^-}-N$, Av.$P_2O_5$, Ex.-K, and EC were high by small extent in surface layer of 0~20cm soil depth without the sign of salt movement to deeper layers. On the contrary Ex.-ca, Ex.-Mg, and pH became high with increase of soil depths. 2. $NO_3{^-}-N$, Av.$P_2O_5$, Ex.-K, and EC in surface soil were high in the order of Converted, Paddy-Upland Rotation, Potato-Chinese Cabbage>2 Year, Rotation, Potato-Chinese Cabbage>Converted, Paddy-Upland Rotation, Soybean>Continous Paddy, which responded well to fertilizer application rates. On the other hand Ex.-Ca, Ex.-Mg, and pH in whole layers were high in the order of Converted, Paddy-Upland Rotation, Soybean>Converted, Paddy-Upland Rptation, Potato-Chinese Cabbage>2 Year, Rotation, Potato-Chinese Cabbage>Continuous Paddy, which largely depended on plant absorption. 3. Nutrient balance in upland cropping system cultivating potato and Chinese cabbage showed that the input of chemical fertilizer of nitrogen and potassium was less than the plant uptake, while it was reverse for phosphorus with much gap between fertilizer input and plant uptake. Therefore, phosporous was expected to be accumulated by 27kg/10a every year. 4. Nutrient balance in upland cropping system cultivating soybean showed that nitrogen was not deficient to soybean crops even the chemical fertilizer input was less than plant uptake because of nitrogen fixation by rhizobia. However, there was about 1kg/10a deficit of potassium, which resulted dificiency symptom in the middle stage of soybean growth. For phosphorous there was excess of 4kg/10a, which was expected to be short for maintaining phosphorous fertility of upland soils.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.21 no.1
• /
• pp.49-56
• /
• 2015

Background: Although many of those who drive for a living are exposed to repetitive and awkward posture and whole body vibration which cause them cumulative trauma disorder, therapeutic studies related to the problems from the transport unit are still somewhat inadequate. The purpose of this case report is to identify the effect of combined exercise program on patients suffering chronic neck pain caused by long hour of intra-city bus driving. Method: A total of 4 subjects are selected as patients, all of whom have more than 10 years of experience in intra-city bus transportation services. These people have suffered from neck pain for years. We ran the combined exercise program 3 times a week for 4 weeks and respectively evaluated the results after the 2nd and 4th week. We implemented conventional physiotherapy for 40 minutes, another 40 minutes of combined exercise program, and then educated the patients to enable themselves to do active stretching program as a home program. The combined exercise program contained 3 different stages. 1st stage: active stretching program, 2nd stage combined stabilization exercise and strengthening exercise, 3rd stage: proprioceptive exercise Result: After 4 weeks of intervention, there was enhance in the range of motion. $12^{\circ}$ increase in flexion, $10^{\circ}$ in extension, $6^{\circ}$ in lateral flexion respectively, and $10^{\circ}$ in rotation on average. VAS(visual analgue scale) decreased by 33% on average, NDI(neck diability index) by 28% and fatigability by 23%. Conclusion: There were improved results in the range of motion, NDI, VAS, and in fatigability after applying combined exercise program to intra-city bus drivers exposed to whole body vibration and cumulative trauma disorder.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.1
• /
• pp.64-77
• /
• 2020

An electric-pump cycle, which is a propellant supply system for driving pumps of a liquid rocket engine using an electric motor, has the advantages of simple system configuration and easy control of supply flow rate and pressure. This paper investigates and analyzes the overseas research trends of the electric-pump cycle. In addition, the research and development country, performing organization, application, engine thrust, pump pressure increase, motor power, and rotation speed are summarized. Among them, the design variables of the overseas research that applied the upper-stage propulsion system with the thrust range of 0.445~2.2 kN could be used in the study of a similar electric-pump cycle in Korea.