• 한국정밀공학회지
• /
• 제26권1호
• /
• pp.130-137
• /
• 2009

This paper deals with the comparisons of methodologies to express finite rotations accounting for analysis of the rotor system. Researches have been made to predict a behavior of its rotational motion by introducing Euler angles which turned out to be lack in consistency and exactness of the analysis. To overcome this deficiency a new methodology is applied by using both spherical coordinate and quaternion in the rotor rotation and shows its superiority over choices of the Euler angle in terms of kinetic energy and rotation velocity. It is found through numerical examples that quaternion is a more useful and valid tool to derive the ideal numerical model of the rotor system.

• 한국운동역학회지
• /
• 제27권1호
• /
• pp.67-74
• /
• 2017

Objective: The purpose of this study was to apply a general linear model in statistics to marker position vectors used to study human joint rotational motion in biomechanics. Method: For this purpose, a linear model that represents the effect of the center of hip joint rotation and the rotation of the marker position on the response was formulated. Five male subjects performed hip joint functional motions, and the positions of nine markers attached on the thigh with respect to the pelvic coordinate system were acquired at the same time. With the nine marker positions, the center of hip joint rotation and marker positions on the thigh were estimated as parameters in the general linear model. Results: After examining the fitted model, this model did not fit the data appropriately. Conclusion: A refined model is required to take into account specific characteristics of longitudinal data and other covariates such as soft tissue artefacts.

• 대한원격탐사학회지
• /
• 제24권6호
• /
• pp.641-644
• /
• 2008

본 저자가 제안한 카메라 외부표정에서 광속조정법에 기반한 카메라 자세계산 방법을 보완하기위해 (전재춘과 Shankar, 2007, 2008), 본 논문은 카메라 자세를 벡터내적으로 결정하는 방법을 소개한다. 카메라 위치를 기준으로 각 지상기준점의 방향벡터와 카메라 광축 단위벡터간의 사잇각을 통하여 이 단위벡터를 계산하는 것이다. 카메라 위치는 벡터내적에 의해 계산된다. 카메라의 수평/수직 단위벡터는 Yakimovsky 와 Cunningham(1978)의 카메라 모델(CAHV)을 이용 하였다.

• 지구물리와물리탐사
• /
• 제26권4호
• /
• pp.238-267
• /
• 2023

지구자전과 조석현상에 관하여 19세기 이후 현재까지 알려진 주요 내용들을 소개하였다. 지구자전속도의 영년적/주기적 변화, 세차운동과 장동, 극운동에 관하여 기술하였으며, 또한 지구의 공전/자전 상태와 빙하기도래의 관련설 - Milankovitch 이론에 대하여 돌아보고, 자전과 긴히 연관된 현상으로서 지구조석에 대하여도 기술하였다. 그리고 몇몇 이론적 상세를 부록에 두었다.

• 한국분말재료학회지
• /
• 제21권4호
• /
• pp.307-312
• /
• 2014

This study is focused on investigating the relation between the particle size of silver flake powder and mechanical milling parameters. Mechanical milling parameters such as ball size, impeller rotation speed and milling time of the attrition ball-mill were controlled to produce silver flake powder. The particle size of the silver flake powder increased with increasing ball size and impeller rotation speed. The change of the particle size of the silver flake powder with mechanical milling parameters was analyzed based on balls motion in the mill container of the attrition ball-mill. The silver flake particles were formed at the elastic deformation area of the ball due to the collision between balls. The change of the particle size of the silver flake powder with mechanical milling parameters well consists with the change of the collision energy of ball with parameters mentioned above.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.819-824
• /
• 2001

Mean velocity and Reynolds stress components of the developing turbulent flows in a rotating 90 degree bend with square cross-section were measured by a hot-wire anemometer. Effects of the centrifugal and Coriolis forces generated by the curvature and rotation of bend on the mean motion and turbulence structures are investigated experimentally. Results show that the Coriolis force associated with the rotation of the bend may act both through the mean motion and turbulent structures, thereby changing the pressure fields, mean and turbulent velocities distributions.

• 대한기계학회논문집
• /
• 제17권11호
• /
• pp.2723-2729
• /
• 1993

Moire principles are applied to the measurement of the spindle radial error motion. As opposed to conventional techniques, no master cylinder or ball is needed in the measurement so that the offset and out-of-roundness errors of the master can be inherently eliminated. Two periodic circular gratings are used, one is made on the spindle and the other is held stationary on the reference frame. When the two gratings are seen superimposed during spindle rotation, an interference fringe pattern is observed from which the information on the eccentricity between the two gratings can be extracted with high precision. The optical design and fringe analysis techniques of a prototype measurement system are described in detail with exemplary measurement results.

• 한국자동차공학회논문집
• /
• 제5권1호
• /
• pp.69-78
• /
• 1997

Main sources of the vibration in gear driving system are transmission error and backlash. Transmission error is the difference of the rotation between driving and driven gear due to tooth deformation and profile error. Vibro-impacts induced by backlash between meshing gears lead to excessive vibration and noise in many geared rotation systems. Nonlinear dynamic characteristics of the gear driving system due to transmi- ssion error and backlash are investigated. Transmission error is calculated for spur gear. Nonlinear equation of motion for the gear driving system is developed with the calculated transmission error and backlash. Numerical analysis of the equation and the experimental results show the existence of meshing frequency, superharmonic compon- ents. Instability of the gear driving motion is found on the basis of Mathieu equation. Rattle vibration due to backlash is also discussed on the basis if nonlinear jump phenomenon.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.328-330
• /
• 1994

The Ultrasonic motor(USM) has many good characteristics such as high torque at low speed range, large holding torque based upon frictional force, high speed response, flexible free ferns, compactness in size, low magnetic noise and silentness in motion. Because of having low speed rotation, USM is good as an actuator of a small size direct drive (DD) manipulator. The acturators for the DD manipulators must have good controllability on the speed and torque from zero to maximum value continuously. New method was developed for speed and torque control by the phase difference control of the two-phase driving signals of the motor. Then rule adjustable compliant and dumped motion was realized on the output shaft of the motor by PD control of the output shaft angle.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제33회 춘계학술대회 개최
• /
• pp.265-270
• /
• 2001

Hip joint simulator which Is an essential device for evaluating the wear of biomaterials (ultrahigh molecular weight polyethylene, Co-Cr alloy, alumina, etc.) used in total hip joint replacement was developed. This hip joint simulator mimics the joint motion and joint loading of human gait by adapting the 4 degree of freedom in kinematic motion (flexing/extension, adduction/abduction, Internal rotation/external rotation) and axial loading, Four stations are operated by 8 servo-motors and harmony drives. Joint leading was imposed by displacement control from a ball screw, LM guide, and spring system. Each kinematic link system operates separately or coupled modes. A heater and a thermocouple were installed for keeping the body temperature in each station.