• Korean Journal of Computational Design and Engineering
• /
• v.19 no.4
• /
• pp.340-346
• /
• 2014

There are many factors that contribute to hit probability of the gun shot of ground combat vehicles. Aiming accuracy is mainly affected by the dynamic state of the vehicle. The stabilization error of the turret under system vibration is one of the major factors that affect the aiming accuracy. The vibration of the vehicle is affected by both the state of the road and the speed of the vehicle. This paper analyzes the aiming accuracy of the gun equipped on the GCV when the vehicle drives on the different roads and at different speed. The vertical displacement and the pitch angle of the gun are calculated and the impact points of the target are calculated. Distribution of the impact points on the target is greatly influenced by the pitch rotation rather than vertical displacement. And this aiming errors result in the errors of point of impacts on the target after the bullet flies through the air under trajectory equations. The GCV is modeled using a half-car model with 6 D.O.F. and the specifications of the M2 machine gun are used in trajectory calculation simulation and the target is located in 1000 m away from the gun.

• Current Optics and Photonics
• /
• v.4 no.6
• /
• pp.500-508
• /
• 2020

The rifling angle of artillery is an important parameter, and its determination plays a key role in the stability, hit rate, accuracy and service life of artillery. In this study, we propose an optical measurement method for the rifling angle based on angle error correction. The method is based on the principle of geometrical optics imaging, where the rifling on the inner wall of the artillery barrel is imaged on a CCD camera target surface by an optical system. When the measurement system moves in the barrel, the rifling image rotates accordingly. According to the relationship between the rotation angle of the rifling image and the travel distance of the measurement system, different types of rifling equations are established. Solving equations of the rifling angle are deduced according to the definition of the rifling angle. Furthermore, we added an angle error correction function to the method that is based on the theory of dynamic optics. This function can measure and correct the angle error caused by the posture change of the measurement system. Thus, the rifling angle measurement accuracy is effectively improved. Finally, we simulated and analyzed the influence of parameter changes of the measurement system on rifling angle measurement accuracy. The simulation results show that the rifling angle measurement method has high measurement accuracy, and the method can be applied to different types of rifling angle measurements. The method provides the theoretical basis for the development of a high-precision rifling measurement system in the future.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.12
• /
• pp.167-174
• /
• 2023

This paper attempted to improve the accuracy of the colorectal cancer diagnosis model using image data augmentation in convolutional neural network. Image data augmentation was performed by flipping, rotation, translation, shearing and zooming with basic image manipulation method. This study split 4000 training data and 1000 test data for 5000 image data held, the model is learned by adding 4000 and 8000 images by image data augmentation technique to 4000 training data. The evaluation results showed that the clasification accuracy for 4000, 8000, and 12,000 training data were 85.1%, 87.0%, and 90.2%, respectively, and the improvement effect depending on the increase of image data was confirmed.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.5
• /
• pp.443-451
• /
• 2015

In photogrammetry, GCPs (Ground Control Points) have traditionally been used to determine EOPs (Exterior Orientation Parameters) and to produce DEM (Digital Elevation Model). The existing DEM can be used as GCPs, where the observer’s approach is a difficult area, because it is very restrictive to survey in the field. For this, DEM matching should be performed. This study proposed the fusion method using ICP (Iterative Closest Point) and RT (proposed method by Rosenholm and Torlegard, 1988) in order to improve accuracy of the DEM matching. The proposed method was compared to the ICP method to evaluate its usefulness. Pseudo reference DEM with resolution 10m, and modified DEM (random-numbers are added from 0 to 2 at height; scale is 0.9; translation is 100 meters in 3-D axes; rotation is from 10° to 50° from the reference DEM) were used in the experiment. The results proposed accuracy was highest in the matching and absolute orientation. In the case of ICP, according to rotation of the modified DEM being increased, absolute orientation error is increased, while the proposed method generally showed consistent results without increasing the error. The proposed method would be applied to matching when the DEM is modified up to 30° rotation, compared to the reference DEM, based on the results of experiments. In addition when we use Drone, this method can be utilized to identify EOPs or detect 3-D surface deformation from the existing DEM of the inaccessible area.

• Journal of the Korean Geographical Society
• /
• v.49 no.3
• /
• pp.438-455
• /
• 2014

This study aims at providing a set of viable answers regarding the projection and cartographic scale of Daedongyeojido through a GIS-based planimetric accuracy analysis. Both global and local analyses were undertaken in the use of an analytical tool, MapAnalyst. The main results from the global analysis are threefold. First, the overall cartographic scale turned out to be between 1:158,000 and 1:162,000. Second, the rotation angles were between $2^{\circ}$ and $3^{\circ}$, and the equidistant cylindrical projection reported the smallest value. Third, in terms of position accuracy, the conformal cylindrical projection showed a best fit to the map. A local analysis was undertaken for the conformal cylindrical and equidistant azimuthal projections and its main results are threefold. First, the largest distortions in terms of the displacement vectors and distortion grid were found in the northern borderlands. Second, from the isoline maps of scales, it was acknowledged that local scales between 1:170,000 and 1:175,000 were found around the middle part of the Korean peninsula centered on Seoul. As away from the region to the north-south direction, increasingly larger scales were distributed, while the smallest ones were found in the western and eastern edges of the peninsula. Third, from the isoline maps of rotation, it was known that areas west of a northernmost city (Junggangjin) were substantially rotated to the west, while ones east of it to the east. For a more sophisticated analysis, some need to be done to have a larger set of control points, a better way of postulating the map projection, and a more advanced set of techniques for a local analysis.

• Journal of Korea Multimedia Society
• /
• v.13 no.11
• /
• pp.1630-1642
• /
• 2010

Recently, there is an increasing need for developing the technique of Hand Gesture Recognition (HGR), for vision based interface. Since hand gesture is defined as consecutive change of hand posture, developing the algorithm of Hand Posture Recognition (HPR) is required. Among the factors that decrease the performance of HPR, we focus on rotation factor. To achieve rotation invariant HPR, we propose a method that uses the property of video that adjacent frames in video have high correlation, considering the environment of HGR. The proposed method introduces template update of object tracking using the above mentioned property, which is different from previous works based on still images. To compare our proposed method with previous methods such as template matching, PCA and LBP, we performed experiments with video that has hand rotation. The accuracy rate of the proposed method is 22.7%, 14.5%, 10.7% and 4.3% higher than ordinary template matching, template matching using KL-Transform, PCA and LBP, respectively.

• Journal of KIISE
• /
• v.44 no.7
• /
• pp.692-702
• /
• 2017

Face detection using the LBP based feature descriptor has issues in that it can not represent spatial information between facial shape and facial components such as eyes, nose and mouth. To address these issues, in previous research, a facial image was divided into a number of square sub-regions. However, since the sub-regions are divided into different numbers and sizes, the division criteria of the sub-region suitable for the database used in the experiment is ambiguous, the dimension of the LBP histogram increases in proportion to the number of sub-regions and as the number of sub-regions increases, the sensitivity to facial orientation rotation increases significantly. In this paper, we present a novel facial region segmentation method that can solve in-plane rotation issues associated with LBP based feature descriptors and the number of dimensions of feature descriptors. As a result, the proposed method showed detection accuracy of 99.0278% from a single facial image rotated in orientation.

• Spatial Information Research
• /
• v.14 no.3 s.38
• /
• pp.271-284
• /
• 2006

This study suggests the adjustment method of cadastral non-coincidence using spatial data referenced digital cadastral map and a present state. In designing the methodology, we should introduce the semi-automatic method for guaranteeing the stability and the accuracy at the arrangement of cadastral non-coincidence based on some cadastral specialist. This study could mainly show you rotation type, bias type, and rotation/bias type among cadastral non-coincidence types. We selected the matching reference point through the prototype system which automatically arranges in the study area. And then, we analysis the optimum rotation ratio(-0.4%). Finally, this paper show you calibrating cadastral non-coincidence using the rotation ratio. The methodology of this study has a limitation for arranging in case of cadastral non-coincidence by the area variation and some irregular types with unknown reason. Therefore, this case should be surveyed in direct method.

• Steel and Composite Structures
• /
• v.29 no.6
• /
• pp.717-734
• /
• 2018

This paper presents the flexural performance of steel beam-to-column joints composed of hollow structural section beams and columns. A finite element (FE) model was developed incorporating geometrical and material nonlinearities to evaluate the behaviour of joints subjected to bending moments. The numerical outcomes were validated with experimental results and compared with EN1993-1-8. The demountability of the structure was discussed based on the tested specimen. A parametric analysis was carried out to investigate the effects of steel yield strength, end-plate thickness, beam thickness, column wall thickness, bolt diameter, number of bolts and location. Consequently, an analytical model was derived based on the component method to predict the moment-rotation relationships for the sub-assemblies with extended end-plates. The accuracy of the proposed model was calibrated by the experimental and numerical results. It is found that the FE model is fairly reliable to predict the initial stiffness and moment capacity of the joints, while EN1993-1-8 overestimates the initial stiffness extensively. The beam-to-column joints are shown to be demountable and reusable with a moment up to 53% of the ultimate moment capacity. The end-plate thickness and column wall thickness have a significant influence on the joint behaviour, and the layout of double bolt-rows in tension is recommended for joints with extended end-plates. The derived analytical model is capable of predicting the moment-rotation relationship of the structure.

• Journal of the Korean Society of Radiology
• /
• v.6 no.2
• /
• pp.143-149
• /
• 2012

Today each hospital is trend that change rapidly by up to date, digitization and introducing newest medical treatment equipment. So, we introduce new CR system and supplement film system's shortcoming and PACS, EMR, RTP system's network that is using in hospital harmoniously and accomplish quality improvement of medical treatment and service elevation about business efficiency enlargement and patient Accordingly, we wish to introduce our case that integrate reflex that happen with radiation oncology here upon to PACS using CR system and estimate the availability. We measured that is Gantry, Collimator Star Shot, Light vs. Radiation, HDR QA(Dwell position accuracy) with Medical LINAC(MEVATRON-MX) Then, PACS was implemented on the digital images on the monitor that can be confirmed through the QA. Also, for cooperation with OCS system that is using from present source and impose code that need in treatment in each treatment, did so that Order that connect to network, input to CR may appear, did so that can solve support data mistake (active Pinacle's case supports DICOM3 file from present source but PACS does not support DICOM3 files.) of Pinacle and PACS that is Planning System and look at Planning premier in PACS. All image and data constructed integration to PACS as can refer and conduct premier in Hospital anywhere using CR system. Use Dosimetry IP in Filmless environment and QA's trial such as Light/Radition field size correspondence, gantry rotation axis' accuracy, collimator rotation axis' accuracy, brachy therapy's Dwell position check is available. Business efficiency by decrease and so on of unnecessary human strength consumption was augmented accordingly with session shortening as that integrate premier that is neted with radiation oncology using CR system to PACS. and for the future patient information security is essential.