• Geotechnical Engineering
• /
• v.1 no.1
• /
• pp.21-30
• /
• 1985

The reasonable static and dynamic earth pressure equations were developed by applying the Dubrova's theory and Chang's method to the following cases of wall movements; (1) Active case rotating about the top (2) Active case rotating about the bottom (3) Passive case rotating about the top (4) Passive case rotating about the bottom The equations are presented in accordance with particular wall displacements for the sand and cohesive back-fill, respectively. The results computed by the proposed equations are compared with the conventional theoretical values.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.8
• /
• pp.181-191
• /
• 2004

For a rigid retaining wall with rough face, the magnitude and distribution of active earth pressure on the wall are affected by the shape of failure surface and arching effect developed in the backfill as well as internal friction angle of the backfill and wall friction angle. Therefore, the practical shape of failure surface and arching effect in the backfill must be considered to acquire accurate magnitude and non-linear distribution of active earth pressure acting on the rigid retaining wall. In this study, a new formulation for calculating the active earth pressure on a rough rigid retaining wall rotating about the top is proposed considering the practical shape of non-linear failure surface and arching effects. Accuracy of the proposed equation is checked through comparisons of calculations from the proposed equations with existing model test results. The comparisons show that the proposed equations produce satisfactory results.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.1107-1112
• /
• 2004

For a rigid retaining wall with rough face, the practical shape of failure surface and arching effect in the backfill must be considered to acquire accurate magnitude and non-linear distribution of active earth pressure acting on the rigid retaining wall. In this study, a new formulation for calculating the active earth pressure on a rough rigid retaining wall rotating about the top is proposed considering the practical shape of non-linear failure surface and arching effects. Accuracy of the proposed equation is checked through comparisons of calculations from the proposed equations with existing model test results. The comparisons show that the proposed equations produce satisfactory results.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2001.11a
• /
• pp.212-219
• /
• 2001

This paper describes a durability characteristics of an air-lubricated bump foil journal bearing for high speed turbomachinerys at room temperature. At first, lift-off test and load capacity test were performed to understand the general characteristics of an air-lubricated bump foil journal bearing. A 52N weighted bump foil bearing sleeve was lifted off from a rotating journal at about 3,000rpm, and produced a load capacity of 500N at an operating speed of 15,000rpm. The next was 500 cycles lift-off test with an air-lubricated bump foil journal bearing that had a molybdenum disulfide(MoS$_2$) solid lubricant coated top foil. Data from measuring bearing torque and temperature and the observation of rubbing surface were included in results. Therefore the results of this work will aid in proving durability of air-lubricated bump foil journal bearings.

• Tribology and Lubricants
• /
• v.18 no.2
• /
• pp.153-159
• /
• 2002

This paper describes a durability characteristics of an air-lubricated bump foil journal bearing for high speed turbomachinerys at room temperature. At first, lift-off test and load capacity test were performed to understand the general characteristics of an air-lubricated bump foil Journal bearing. A 52 N weighted bump foil bearing sleeve was lilted off from a rotating Journal at about 3,000 rpm, and produced a load capacity of 500 N at an operating speed of 15,000 rpm. The next was 500 cycles lift-off test with an air-lubricated bump foil journal bearing that had a molybdenum disulfide(MoS$_2$) solid lubricant coated top foil. Data from measuring bearing torque and temperature and the observation of rubbing surfAce were included in results. Therefore the results of this work will aid in proving durability of air-lubricated bump foil journal bearings.

• Journal of Biomedical Engineering Research
• /
• v.26 no.1
• /
• pp.43-47
• /
• 2005

We have developed a small bore x-ray CT for small animal imaging with a linear x-ray detector array and small-scale slip rings. The linear x-ray detector array consists of 1024 elements of 400□m×400□m with a gadolinium oxysulfide (GOS) scintillator on top of them. To avoid use of expensive large diameter slip rings for projection data transmission from the X­ray detector to the image reconstruction system, we used the wireless LAN technology. The projection data are temporally stored in the data acquisition system residing on the rotating gantry during the scan and they are transmitted to the image reconstruction system after the scan. With the wireless LAN technology, we only needed to use small-scale slip rings to deliver the AC electric power to the X-ray generator and the power supply on the rotating gantry. The performances of the small animal CT system, such as SNR, contrast, and spatial resolution, have been evaluated through experiments using various phantoms. It has been experimentally found that the SNR is almost linearly proportional to the tube current and tube voltage, and the minimum resolvable contrast is less than 30 CT numbers at 40kVp/3.0㎃. The spatial resolution of the small animal CT system has been found to be about 0.9Ip/㎜. Postmortem images of a piglet is also presented.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.7 no.3
• /
• pp.61-66
• /
• 2011

The integrity of the SG(Steam Generator) tubes has been challenged by numerous factors such as flaws, operation, atmosphere, inherently degraded materials, loose parts and even human errors. Of the factors, loose parts(or foreign materials) on the secondary side of the tubes can bring about volumetric defects and even leakage from the primary to the secondary side in a short period of time. More serious concerns about the loose parts are their unknown influx path and rapid growth rate of the defects affected by the loose parts. Therefore it is imperative to detect and characterize the foreign materials and the defects. As a part of the measures for loose part detection, TTS(Top of Tubesheet) MRPC(Motorized Rotating Pancake Coils) ECT has been carried out especially to the restricted high probability area of the loose part. However, in the presence of loose parts in the other areas, wide range loose part detection techniques are required. In this study, loose part standard tube was presented as a way to accurately detect and characterize loose part signals. And the SG tube ECT bobbin coil and MRPC ISI(In-service Inspection) data of domestic OPR-1000 and Westinghouse Model F(W_F) were reviewed and consequently, comprehensive loose part detection technique is derived especially by applying bobbin coil signals

• Journal of Korean society of Dental Hygiene
• /
• v.8 no.4
• /
• pp.205-217
• /
• 2008

The purpose of this study was to provide information on the development of an oral-health promotion program geared toward office workers. The subjects in this study were 240 employees at the headquarters of S construction company. After a survey was conducted in July and August 2008, the answer sheets from 208 respondents were gathered, and 191 answer sheets were analyzed except 17 unanalyzable ones. The findings of the study were as follows: 1. In regard to subjective oral health status, the largest number of the participants that accounted for 37.2% found their mouth to be neither healthy nor unhealthy. The greatest number of them that represented 58.1% had never visited a dentist's office to receive preventive treatment. 2. Regarding relationship between toothbrushing education experience and toothbrushing frequency, the most common toothbrushing frequency was three times a day( 46.5%) among the company employees who had ever received that education. In the event of the office workers without that experience, the most prevalent frequency was three times(63.6%). The toothbrushing frequency was statistically significantly different according to the toothbrushing education experience(p<0.05). As to the relationship of toothbrushing education experience to tooth- brushing method, the largest number(48.2%) of those who had ever received that education brushed their upper and lower teeth along with the gums by rotating the toothbrush downward from the top and upward from the bottom respectively. In the event of the office workers without that experience, 49.4 percent brushed their teeth and gums by rotating the toothbrush up and down. Thus, whether they had ever received education about toothbrushing made a statistically significant difference to their toothbrushing method(p<0.05). 3. As a result of evaluating their oral health belief by utilizing a five-point scale, they got a mean of 2.95. In each area of oral health belief, they got the best marks in benefit(3.66), salience(3.42), barrier(2.84), susceptility(2.58) and seriousness(2.23). Given the above-mentioned finding of the study, two sorts of oral health beliefs, which are benefit and salience, should be stressed in the development of oral health education programs that cater to company employees. And sustained research efforts should be channeled into finding out the relationship between oral health and actual oral health care.

• Korean Journal of Heritage: History & Science
• /
• v.44 no.4
• /
• pp.112-129
• /
• 2011

This paper was written to understand, through the types and production techniques, how cooking vessels of Baekje Hanseong period had evolved, - the cooking vessels that were excavated from the historic sites of Baekje Hanseong Period such as Mongchontoseong and Pungnaptoseong of Seoul, the ancient tomb group of Seokchon-dong, and Misari historic site of Hanam. First, the results produced through the analysis of types of these cooking vessels are as followings: as for deep bowls, the maximum body diameter is found on the top of pottery, while as for an egg-shaped pottery, the maximum body diameter is found on the middle height of pottery. However, as for the rim diameter ratio to the neck diameter ratio of pottery, the said two typed potteries were shown to have smaller ones. In consideration of each historic site, as for deep bowls, the ancient tomb group of Seokchon-dong had potteries that had less volumes, were deeper, and had higher maximum body diameters. When it comes to an egg-shaped pottery, Pungnaptoseong had the potteries that were deeper than those of Misari historic site, and their potteries also had the maximum body diameter found on the middle height of pottery, and larger rim diameter ratio to the neck diameter of the pottery. The results produced though the analysis of the production techniques of these cooking vessels are as followings: in the case of deep bowls, as the width of a volume category gets larger, the pottery stamping with an anvil including patterns was more frequently used for pottery production. In this case, simultaneously braid patterns were frequently found on the outer sides of these potteries. In addition, it was found the basal walls of these potteries were thinnest in all typed potteries. This shows there occurred technique transitions according to the time flow. When it comes to an egg-shaped pottery as well, the pottery produced by using an anvil had the thinnest basal wall and its rim diameter ratio to its neck diameter ratio was smaller. Also around the mouth of this pottery, traces were found on its front, the traces formed by the strong rotating power. It is determined these two typed potteries were all produced by using an anvil to have thinner walls. Then, how these potteries were used? In the case of deep bowls, liquid food was put on a hearth or ground to be cooked whereas in the case of an egg-shaped pottery, the pottery was put on a puttumak(kitchen stove) mainly for boiling water. The deep bowls and egg-shaped potteries excavated from the center areas of Baekje Hanseong Period were not clearly determined about when their pastes or firing times were, but as for their production techniques, it was possible to check how they had developed. Moreover, it was determined that in the changing aspects of their production techniques, temporalite is also reflected.