• 한국가시화정보학회지
• /
• 제20권3호
• /
• pp.102-108
• /
• 2022

In the fan module of the intercooling refrigerator, a drain hole structure was designed for stable drainage of defrost water. However, the airflow passing through the drain hole can disturb flow features around the evaporator. Since this backflow leads to an increase in flow loss, the accurate experimental and numerical analyses are important to understand the flow characteristics around the fan module. Considering the complex geometry around the fan module, three different turbulence models (Standard k-ε model, SST k-ω model, Reynolds stress model) were used in computational fluid dynamics (CFD) analysis. According to the quantitative and qualitative comparison results, the Standard k-ε model was most suitable for the research object. High-accuracy results well match with the experiment result and overcome the limitation of the experiment setup. The method used in this study can be applied to a similar research object with an orifice outflow driven by a rotating blade.

• Advances in aircraft and spacecraft science
• /
• 제10권1호
• /
• pp.19-49
• /
• 2023

The present study proposes a theoretical and numerical investigation on the dynamic response behaviour of a functional graded (FG) ceramic-metal tapered rotor shaft system, by the differential quadrature finite elements method (DQFEM) to identify the natural frequencies for modelling and analysis of the structure with suitable validations. The purpose of this paper is to explore the influence of heat gradients on the natural frequency of rotation of FG shafts via three-dimensional solid elements, as well as a theoretical examination using the Timoshenko beam mode, which took into account the gyroscopic effect and rotational inertia. The functionally graded material's distribution is described by two distribution laws: the power law and the exponential law. To simulate varied thermal conditions, radial temperature distributions are obtained using the nonlinear temperature distribution (NLTD) and exponential temperature distribution (ETD) approaches. This work deals with the results of the effect on the fundamental frequencies of different material's laws gradation and temperature gradients distributions. Attempts are conducted to identify adequate explanations for the behaviours based on material characteristics. The effect of taper angle and material distribution on the dynamic behaviour of the FG conical rotor system is discussed.

• 한국항공우주학회지
• /
• 제48권5호
• /
• pp.343-354
• /
• 2020

쌍안정 장치는 서로 다른 두 가지 상태에서 안정성을 갖는 시스템이며, 구동에 있어 에너지 효율 측면에서 이득을 얻을 수 있다. 이러한 쌍안정 장치는 다양한 방법을 통해 구현되며, 전개형 구조물, 스위치 시스템 그리고 파지 로봇 등, 주된 동작이 두 종류로 구분되는 모핑 시스템에 적용될 수 있다. 하지만 기존 장치들의 복잡성과 구조적 제한 때문에, 링크 구조물처럼 회전하는 구조를 포함하는 모핑 시스템을 구현하는 것은 어려움이 존재한다. 본 연구에서는 원통형 영구자석을 이용하여 회전운동에 있어 쌍안정성을 갖는 장치를 구현하는 방법이 제안된다. 원통형 영구자석의 전자석 모델을 도입하여 자기장과 자기력을 도출했으며, 이를 이용하여 원통형 영구자석을 포함하는 두 링크 사이의 힘 관계를 추정했다. 대칭 쌍안정성을 위한 원통형 영구자석의 배열을 선정했으며, 제안하는 쌍안정 장치를 회전 조인트로 연결된 링크 구조물에 적용하여 외부 토크에 대한 안정성을 실험을 통해 확인하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권1호
• /
• pp.75-81
• /
• 2011

이종합금인 알루미늄 합금 6061-T6와 알루미늄 합금 5083-O의 용접을 위해 마찰교반 용접기술을 사용하였다. 마찰교반 용접된 이종 접합부에 대하여 기계적 특성, 경도 및 조직변화를 관찰하였다. 용접재의 기계적특성은 후진 측에 위치한 알루미늄 합금의 교반영역에 형성되는 미세조직이 주요한 변수로 작용하였다. 이종 알루미늄 합금이 교차한 양파 모양 형상의 얇은 층을 이루었다. 미세조직관찰에서 공구회전방향과 무관하게 이종합금 접합부에 기공이 관찰되지 않았으나 6061-T6 쪽 열영향부 영역에서 결정립 조대화기 뚜렷하였다. 본 논문의 연구결과, 결함이 없는 최상의 용접조건은 Al 6061-T6를 공구 진행방향에 전진 측에, Al 5083-O를 후진 측에 위치하고, 이송속도 124 mm/min, 1250 rpm의 공구의 회전수, 5 mm의 프루브 직경, 4.5 mm의 프루브 길이, 20 mm의 공구어깨, $2^{\circ}$의 공구 경사각 이다. 이때 용접재의 최대인장강도는 231 MPa이였고, 항복강도는 121 MPa을 나타내었다.

• 한국환경보건학회지
• /
• 제37권2호
• /
• pp.124-132
• /
• 2011

Biofilm and aeration tank of pilot and full RABC (rotating activated Bacillus contactor) plant were analyzed to characterize and determine bacterial community structure in food wastewater treatment system at winter. Concentration of heterotrophic bacteria and Bacillus group was $10^7$ and $10^5$ CFU/ml, respectively, at biofilm of pilot-plant while others represented $10^6$ and $10^4$ CFU/ml, respectively. Five and eight phyla were detected at biofilm of pilot- and full-plant, respectively, by 16S rDNA sequencing. Biofilm of pilot-plant was dominated by ${\beta}$-Proteobacteria (38.8%), ${\gamma}$-Proteobacteria (22.4%), and Bacteroidetes (12.2%), and the most dominant genus was Zoogloeae genus (22.4%). Candidate division TM7 (12.5%) was only detected at biofilm of full-plant and it was dominated by Bacteroidetes (33.3%), ${\gamma}$-Proteobacteria (29.2%), and ${\beta}$-Proteobacteria (20.8%). Clostridium genus specific primer set enabled to detect the sequences of Clostridium genus. These suggested that anaerobic and aerobic bacteria were coexisted even from the initial period of biofilm formation and ${\beta}$-Proteobacteria, ${\gamma}$-Proteobacteria and Bacteroidetes were major phyla in biofilm of food wastewater treatment system at winter.

• 한국소음진동공학회논문집
• /
• 제15권3호
• /
• pp.251-258
• /
• 2005

The free vibration of a spinning flexible disk-spindle system supported by hydro dynamic bearings (HDB) in an HDD is analyzed by FEM. The spinning flexible disk is described using Kirchhoff plate theory and von Karman non-linear strain, and its rigid body motion is also considered. It is discretized by annular sector element. The rotating spindle which includes the clamp, hub, permanent magnet and yoke, is modeled by Timoshenko beam including the gyroscopic effect. The flexible supporting structure with a complex shape which includes stator core, housing, base plate, sleeve and thrust pad is modeled by using a 4-node tetrahedron element with rotational degrees of freedom to satisfy the geometric compatibility. The dynamic coefficients of HDB are calculated from the HDB analysis program, which solves the perturbed Reynolds equation using FEM. Introducing the virtual nodes and the rigid link constraints defined in the center of HDB, beam elements of the shaft are connected to the solid elements of the sleeve and thrust pad through the spring and damper element. The global matrix equation obtained by assembling the finite element equations of each substructure is transformed to the state-space matrix-vector equation, and the associated eigen value problem is solved by using the restarted Arnoldi iteration method. The validity of this research is verified by comparing the numerical results of the natural frequencies with the experimental ones. Also the effect of supporting structures to the natural modes of the total HDD system is rigorously analyzed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.572-578
• /
• 2003

The free vibration of a spinning flexible disk-spindle system supported by hydro dynamic bearings in a HDD is analyzed by FEM. The spinning flexible disk is described using Kirchhoff plate theory and von Karman non-linear strain, and its rigid body motion is also considered. It is discretized by annular sector element. The rotating spindle which includes the clamp, hub, permanent magnet and yoke, is modeled by Timoshenko beam including the gyroscopic effect. The flexible supporting structure with a complex shape which includes stator core, housing, base plate, sleeve and thrust pad is modeled by using a 4-node tetrahedron element with rotational degrees of freedom to satisfy the geometric compatibility. The dynamic coefficients of HDB are calculated from the HDB analysis program, which solves the perturbed Raynolds equation using FEM. Introducing the virtual nodes and the rigid link constraints defined in the center of HDB, beam elements of the shaft are connected to the solid elements of the sleeve and thrust pad through the spring and damper element. The global matrix equation obtained by assembling the finite element equations of each substructure is transformed to the state-space matrix-vector equation, and the associated eigenvalue problem is solved by using the restarted Arnoldi iteration method. The validity of this research is verified by comparing the numerical results of the natural frequencies with the experimental ones. Also the effect of supporting structures to the natural modes of the total HDD system is rigorously analyzed.

• Structural Engineering and Mechanics
• /
• 제68권6호
• /
• pp.747-760
• /
• 2018

In the present study, a methodology for developing fragilities of arch concrete dams to assess their performance against seismic hazards is introduced. Firstly, the probability risk and fragility curves are presented, followed by implementation and representation of the way this method is used. Amirkabir arch concrete dam was subjected to non-linear dynamic analyses. A modified three dimensional rotating smeared crack model was used to take the nonlinear behavior of mass concrete into account. The proposed model considers major characteristics of mass concrete. These characteristics are pre-softening behavior, softening initiation criteria, fracture energy conservation, suitable damping mechanism and strain rate effect. In the present analysis, complete fluid-structure interaction is included to account for appropriate fluid compressibility and absorptive reservoir boundary conditions. In this study, the Amirkabir arch concrete dam is subjected to a set of 8 three-component earthquakes each scaled to 10 increasing intensity levels. Using proposed nonlinear smeared crack model, nonlinear analysis is performed where the structure is subjected to a large set of scaled and un-scaled ground motions and the maximum responses are extracted for each one and plotted. Based on the results, fragility curves were plotted according to various and possible damages indexes. Discrete damage probabilities were calculated using statistical methods for each considered performance level and incremental nonlinear analysis. Then, fragility curves were constructed based on the lognormal distribution assumption. Two damage indexes were introduced and compared to one another. The results indicate that the dam has a proper stability under earthquake conditions at MCE level. Moreover, displacement damages index is more conservative and impractical in the fragility analysis than tensional damage index.

• 공업화학
• /
• 제7권2호
• /
• pp.280-288
• /
• 1996

여러 가지 전착 조건에서 티타늄 기판상에 이산화납을 전착시킨 전극을 사용하여 전해질 용액 중에서 오존을 발생시킬 경우 전착된 이산화납의 결정표면 양상이 오존발생 전류효율에 미치는 영향과 이산화납 전극의 표면구조 변화를 고찰하였다. 또한 백금 디스크전극 위에 이산화납을 전착시킨 회전전극을 이용하여 산소전이반응이 오존발생에 미치는 영향과 오존발생용 전극으로 개발하기 위해 이산화납의 내식성과 오존발생 최적 전류밀도도 검토하였다. 전착한 이산화납의 결정표면 입자가 크고 결정성이 좋은 전극일수록 오존발생 전류효율이 높았으며 이러한 오존발생용 이산화납 전극을 전착시키기 위한 최적전류밀도는 $50mA/cm^2$이었으며 전착용액에 글리세린을 소량 첨가하면 오존발생에 유리한 결정구조를 갖는 이산화납이 전착되었다. 또한 $10mA/cm^2$ 이하의 너무 낮거나 $100mA/cm^2$ 이상의 너무 높은 전류밀도에서는 오존발생 성능이 떨어지고 소지금속에 대한 접착성이 좋지 않은 전극이 만들어 졌다. 새로 만들어진 이산화납전극을 오존발생용으로 사용할 때 사용 초기 단계에서 이산화납전극의 표면구조 변화가 일어나며 이는 오존발생에 유리한 효과를 가져왔다. 타원소를 도핑시킨 이산화납 전극에서는 오존발생보다 산소발생 반응이 활발하게 일어나 오존발생은 산소발생의 중간 단계를 거치지 않고 산소발생과는 경쟁적으로 일어나는 것으로 추정되며 $0.7{\sim}0.8A/cm^2$의 전류밀도에서 최대의 오존발생 전류효율을 나타내었다.

• 대한기계학회논문집A
• /
• 제38권10호
• /
• pp.1109-1116
• /
• 2014

본 연구에서 제안된 차량용 휠체어 수송메커니즘은 크게 이송메커니즘과 수납메커니즘으로 구성된다. 여기서 휠체어 이송메커니즘은 매니퓰레이터로 구성되며, 차량의 루프에 설치되어 운전석에서 트렁크의 위치까지 휠체어를 이송하는 기능을 한다. 휠체어 수납메커니즘은 리프팅 호이스트로 구성되며, 차량의 트렁크에 설치되어 이송된 휠체어를 트렁크 내부로 수납하고 안전하게 고정하는 기능을 한다. 본 연구에서는 휠체어 이송메커니즘의 조건을 고려한 매니퓰레이터의 방식선정을 위해 수직방식, 수평방식, 텔레스코픽방식 등에 대하여 분석하고 검토하여 하중지지에 강하고 수납보관에 유리한 텔레스코픽방식을 선정하여 적용하였다. 또한 휠체어 수납메커니즘에서는 슬라이드 레일과 리프트와이어에 의한 슬라이드 호이스트방식과 웜기어와 링크로 구성된 회전메커니즘에 의한 회전링크 호이스트방식에 대하여 분석하고 검토하여 트렁크 공간 활용에 유리한 슬라이드 호이스트방식을 선정하여 적용하였다. 본 연구에서 제안된 차량용 휠체어 이송메커니즘은 기존의 휠체어 이용자 이동지원을 위한 차량용 휠체어 이송시스템의 단점을 해소하고 국내 장애인복지차량 구조에 부합하도록 제안하였다.