• 농업과학연구
• /
• 제47권4호
• /
• pp.1123-1134
• /
• 2020

The goal of this study was to develop an accelerated life test for an implement working pump for an agricultural tractor. The field experiments were conducted to measure the load of an implement working pump during major agricultural operations such as plow tillage, rotary tillage, baler operations, and wrapping operations. The measurement system for an implement working pump load was constructed using a pressure sensor, the engine rotational speed, and the hitch pump displacement. The measured implement working pump load was calculated as an equivalent load for each agricultural operation using the Palmgren-Miner rule, which is a cumulative damage method. The equivalent load was calculated using the total load data and peak load data when the total data included the operation of an implement working. The annual usage time of the agricultural tractor was applied to develop two integrated equivalent loads. The acceleration factor was calculated to develop an accelerated life test and was calculated from the two integrated equivalent loads, the maximum pressure, and the flow rate conditions of the hitch pump. In Korea, the warranty life of a tractor is 2,736 hours, and the time required for the test to guarantee the operational life of tractors was calculated as 7,561 hours. The acceleration factors were calculated as 453.6 and 38.3, respectively, from the total load data and peak load data. The fatigue test time can be shortened by 16.7 and 197.4 hours according to the result of the acceleration factors.

• 드라이브 ㆍ 컨트롤
• /
• 제20권3호
• /
• pp.15-24
• /
• 2023

The aim of this study was to measure and evaluate the exhaust emission factors of agricultural tractors. Engine characteristics and three exhaust emissions (CO, NO_x, PM) were collected under actual agricultural operating conditions. Experiments were performed on idling, driving, plow tillage, and rotary tillage. The load factor (LF) was calculated using the collected engine data, and the emission factor was analyzed using the LF and exhaust emissions. The engine characteristics and exhaust emissions were significantly different for each working condition, and in particular, the LF was significantly different from the currently applied 0.48 LF. The data distribution of exhaust emissions was different depending on the engine speed. In some conditions, the emission factor was higher than the exhaust emission standards. However, since most emission limit standards are values calculated using an engine dynamometer, even if the emission factor measured under actual working conditions is higher, it cannot be regarded as wrong. It is expected that the results of this study can be used for the inventory construction of a calculation for domestic agricultural machinery emissions in the future.

• 한국건설관리학회논문집
• /
• 제19권3호
• /
• pp.3-10
• /
• 2018

근래에 공사의 대형화, 복잡화 등으로 인해 기계화시공은 보편화되었으며, 건설기계는 성공적인 시공을 위한 주요소이다. 그러나 건설기계가 차지하는 비중이 높아지고 있음에도 불고하고 건설기계의 작업능력에 대한 분석은 미미한 실정이다. 또한 현재 품셈에서 모든 건설기계에 대한 기준이 정의되어 있지 않음으로 인해 시공계획 시 작업자에 따라 공사기간을 자의적으로 적용하고 있어 실제 시공 간 공사기간이 부족하여 돌관작업이나 공기지연이 발생된다. 따라서 본 연구에서는 PRD공법에서 사용되는 항타기의 천공작업 공사기간을 기존 방법보다 정확하게 산출할 수 있도록 작업일보를 현장 실사를 통해 천공시간 데이터를 수집하여 항타기의 천공 작업 소요시간을 산정하는 식을 정립하였다. 본 연구 결과를 바탕으로 천공작업의 정확한 공사기간을 산정한다면 공사기간이 부족하여 발생하던 돌관작업이나 공기지연을 방지할 수 있을 것으로 사료된다.

• 한국유체기계학회 논문집
• /
• 제19권5호
• /
• pp.28-34
• /
• 2016

Though a peristaltic pump is a crucial element in miniaturized drug delivery systems, it has some intrinsic disadvantages such as backflow and flow fluctuation. To overcome these limitation, we have developed valve-less peristaltic pump system including orifice and stagnation chamber. we measured flow rate to investigate the performance of rotary peristaltic pump with three rollers and an elastomeric tube pumping a viscous fluid. The flow fluctuations and the backflow happen as a result from the disengagement of the contact interaction between the rollers and the tubes. Stagnation chamber installed in front of orifice plate was composed of rubber tube and gas chamber. By changing orifice hole diameter with stagnation chamber flow rate and pressure in the tube was regulated. The obtained maximum reduction ratio of flow fluctuation is 96.79%.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.1021-1030
• /
• 1996

The mechanism of the mulch film cutter assembly designed as an integral part of a rice transplanting device was developed for mulching cultivation of early season culture rice. This mulch film cutter assembly was directly attached to the transplanting device of the rotary type Japanese transplanter. The principle is that the knife cut a planting slit on the polyethylene film while the planting finger immediately plants seedling into the soil through the planting slit. Computer results implied that the knife of the mulch film cutter assembly can make appropriate planting slit on the polyethylene film as the planting finger effectively plants the seedlings into the paddy soil through the same planting slits.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2002년도 동계 학술대회 논문집
• /
• pp.3-8
• /
• 2002

본 연구는 트랙터 부착형 자동 토양경도 측정 시스템의 개발에 관한 연구로서, 우리나라 토양조건이나 작업형태에 맞는 에너지 절감형 트랙터 로타리날을 개발하기 위한 전단계 연구로서, 기존에 개발된 로타리날과 개량, 보완되어 개발될 로타리날의 성능을 비교 분석하기 위하여 수동 토양경도 측정기의 부정확성을 개량하여 측정의 정확성을 통한 동일 실험조건에서의 실험을 실시하고자 자동으로 작동되며 토양경도측정을 할 수 있는 트랙터 부착형 자동 토양경도 측정 시스템을 개발하는데 목적이 있으며, 그 구체적인 연구 결과는 다음과 같다. (1) 시스템은 토양경도 측정부, 측정장치 구동부, 그리고 트랙터와의 연결부로 구성되었다. (2) 시스템 작동에 필요한 전원공급을 트랙터 배터리에서 공급하였다. (3) 토양경도 측정시 토양속에 돌이나 이물질 층이 형성되어 있는 경우에 콘 페니트로메타가 관입하다가 큰 관입저항 때문에 관입저항 한계설정치까지 가기전 더이상 관입을 못하는 경우가 발생하였다. (5) 성능실험시 관입심이 깊을수록 시험포장 전체에서 대체적으로 토양경도가 높은 것으로 나타났으며, 토양속의 돌이나 이물질 등에의해 경도가 급격히 증가하는 부분이 있는 것으로 사료된다. 이상의 결과에서 살펴보면 본 시스템은 토양경도 측정에 적절하다고 사료된다.

• 한국항공우주학회지
• /
• 제50권6호
• /
• pp.413-422
• /
• 2022

본 논문에서는 중대형 위성용 '제어모멘트자이로'의 고속회전체인 모멘텀 휠의 고장 분석에 대해 기술하였다. 고장 분석을 위해 변조된 신호에서 주기적으로 발생되는 충격신호를 찾기 위해 힐베르트 변환 기법과 신호 복조 기법을 사용한 포락선 스펙트럼 분석을 하였다. 이를 통해 높은 신호의 크기를 가지는 특정 주파수 밴드에서 회전주파수의 조화 성분과 베어링 결함 주파수가 있는지 분석하여 모멘텀 휠의 고장을 진단하였다.

• 한국소음진동공학회논문집
• /
• 제23권4호
• /
• pp.324-331
• /
• 2013

In this paper, static and oscillatory instability of a nanotube conveying fluid and modeled as a thin-walled beam is investigated. Analytically nonlocal effect, effects of boundary conditions, transverse shear and rotary inertia are incorporated in this study. The governing equations and boundary conditions are derived through Hamilton's principle. Numerical analysis is performed by using extended Galerkin method which enables us to obtain more accurate results compared with conventional Galerkin method. Variations of critical flow velocity of carbon nanopipes with two different boundary conditions based on the analytically nonlocal theory and partially nonlocal theory are investigated and pertinent conclusions are outlined.

• Journal of Biosystems Engineering
• /
• 제24권3호
• /
• pp.253-258
• /
• 1999

This study was conducted to develop an automatic egg inspection system for detecting creaked eggs based on acoustic impulse response. This system includes a sound generator, a sound sensor with signal conditioner, and a computer. The sound generator that hit the sharp of the dull edges of an egg was constructed with a ceramic ball pendulum attached to a rotary type solenoid. The signal conditioner included a pre-amplifier and a digital signal processing (DSP) board. The parameters for distinguishing cracked and normal eggs were the area, the geometric centroid and the resonance frequency of power spectrum of the acoustic signal generated. An algorithm for on-line detection of the continuous transferring eggs was developed. The performance tests resulted with 91% success rate to separate cracked and normal eggs at the rate of 1 second per an egg.

• Tribology and Lubricants
• /
• 제25권4호
• /
• pp.236-242
• /
• 2009

Oil viscosity is one of the important parameters for machinery condition monitoring. Basically, it is expressed as kinematic viscosity measured by capillary flow and dynamic or absolute viscosity measured by rotary shear viscometry. Recently, acoustic wave techniques appear in the market, measuring viscosity as the product of dynamic viscosity and density. For Newtonian fluids, knowledge of density allows conversion from one viscosity parameter to the other at a specific shear rate and temperature. In this work, oil samples with different chain lengths of viscosity index (VI) improvers and concentrations were examined by different viscometric techniques. Results showed that acoustic viscosity measurements give misleading results for oil samples with high molecular weight VI improvers and at low temperatures ${\leq}40^{\circ}C$.