• Ecology and Resilient Infrastructure
• /
• 제1권1호
• /
• pp.29-38
• /
• 2014

본 연구는 식생호안의 안정성 평가에 중요한 인자인 식생 근모량에 따른 식생호안의 전단강도와 침식특성을 분석하였다. 식생호안의 평균근모량은 자체 제작한 채취기를 이용하여 측정하였다. 본 연구에서 사용된 식생은 식생호안에서 다소 우점종인 달뿌리풀이다. 흐름 특성별 실험결과 근모량이 증가함에 따라 토양의 전단강도가 증가함을 확인하였고, 아울러 근모량의 증가에 따라 침식율은 지수함수적으로 감소함을 확인하였다. 식생토양의 전단강도가 증가함에 따라 침식율이 지수함수적으로 감소되어 근모량에 기인한 전단강도의 증가는 침식 저항능력의 증가를 가져왔다. 아울러 근모량에 따른 전단강도와 침식율의 상관분을 실시하여 높은 상관계수를 가진 식을 제시하였다. 식생을 가진 호안의 수리적 안정성에는 근모량의 증가에 의한 전단강도와 유수의 특성인 Froude수에 지배적임을 확인하였다.

• 한국습지학회지
• /
• 제14권2호
• /
• pp.199-210
• /
• 2012

본 연구에서는 매트형 식생호안공법에 이용되는 물억새, 사초, 갈대의 성장기간의 경과에 따른 인발력 증가에 대하여 실험하고, 뿌리의 무게와 인발력의 관계를 도출하기 위한 현장 실험을 시행하였다. 흙의 전단력은 임의단면에서의 뿌리 단면적과 인발력의 함수로 나타낼 수 있으므로 인발력 측정은 흙의 전단력 측정을 위한 기초자료로 이용될 수 있다. 현장실험결과 3가지 초종 모두 시간의 경과에 따라 뿌리 무게가 증가하고, 그에 따른 인발력도 증가하였으나, 초종별 특성에는 차이를 보이며, 이는 물억새, 사초의 성장, 번식특성과 갈대의 성장, 번식이 다르기 때문으로 판단된다. 갈대는 두 식물에 비하여 지하경에 의한 번식이 활발하며, 번식을 위하여 지하경이 증가하고, 그에 따라 뿌리 무게, 인발력이 비례하여 증가한다.

• 대한치과보철학회지
• /
• 제38권5호
• /
• pp.675-694
• /
• 2000

The purpose of this study was to investigate the displacement of and the stress distribution on the prosthesis, abutment, and its supporting tissues under functional load, and the effect of alteration in root length of 2nd abutment. The 3-dimensional finite element method was used and the finite element models were prepared in which the abutments of left mandibular 5 unit axed partial denture were canine, the 1st pre-molar and the 2nd molar, and the root lengths of canines were as follows. Model I : Root length of canine was 2mm longer than the 1st premolar Model II : Root length of canine was 2mm shorter than the 1st premolar Static compressive force of 300N was applied to connector between 2nd premolar & 1st molar, and then von Mises stress, displacement and reaction force were obtained. The results were as follows : 1. In fixed partial denture, prosthesis under load on pontic was rotated around mesio-distal long axis of it from longual side to buccal, and simultaneously bended in buccal and gingival direction with mesial end deformed in gingival direction and distolingual end in occlusal. 2. Clinical crowns of abutments were bended in the same directions with those in which prosthesis deforms. Due to that, roots of anterior abutments were twisted in counterclockwise with concentration of shear stress on distal or distobuccal sides of their cervices, and that of posterior was in clockwise with concentration of shear stress on mesiobuccal side of it in the same level with anterior abutments. 3. In case that root length of the 2nd abutment was longer than that of the 1st abutment, its displacement and reaction force which means the force tooth exerts on the surrounding periodontal tissues were smaller but shear stress on itself was larger than in the case root length of 2nd abutment was shorter.

• 한국조경학회지
• /
• 제31권5호
• /
• pp.1-10
• /
• 2003

The purpose of this study was to verify the shore margin protection effect of a root system developed from direct sticking of Salix gracilistyla Miq., focusing on the reinforcement of soil shear strength. The materials were 20cm long sticks whose average diameter and weight were 7.52mm and 14.58g respectively, and sandy loam(Sand 60.36%, Silt 28%, Clay 11.64%), whose maximum dry weight(${\gamma}$$_{dmax}$) was 1.59gf/㎤ at the water ratio( $W_{opt}$) 13.8%. The direct shearing test(KS F 2343) was applied to cylindric columms(diameter 132mm) of pure soil and two years old root reinforced soil. At each condition of vertical stress, 10N/$ extrm{cm}^2$, 14.41N/$\textrm{cm}^2$ and 18.82 N/$\textrm{cm}^2$, five soil+root columns were sheared. After shear tests, the root area ratio and soil moisture on the shear plane were measured. The results of this research were as follows: 1. The average of root area ratio was 1.86% and the soil moisture 14.67%. 2. Two years old root system was found to increase the soil shear strength of pure soil in terms of Cohesion(C) and Inner friction Angle($\phi$) as follows. 3. The relationship between root area ratio and the increased shear strength can be presented with the following equation, $\Delta$S ≒ 0.33ㆍ TrㆍAs/A $\Delta$S : Increased Shear Strength Tr : Average Tension Strength of Root, Ar/A : Root Area Ratioioage Tension Strength of Root, Ar/A : Root Area Ratio

• Restorative Dentistry and Endodontics
• /
• 제19권2호
• /
• pp.549-567
• /
• 1994

Restoration of severly damaged teeth after endodontic treatment had been an interest to many dentists, and it is a fact that there have been lots of studies about it. In these days, although we have used Para-Post, pins, threaded steel post, cast gold post and core, and so on, as a method of restoration frequently, it has been in controversy with the influence of them on the teeth and surrounding periodontal tissue. In this study, we assume that the crown of the upper incisor have severly damaged, so, after the root canal therapy, 4 types of restoration had been carried out; 1) coronal-radicular amalgam restoration, 2) after setting up the Para-Post, restore with composite resin core only, 3) after setting up the Para-Post; restore with amalgam core, then cover with the PPM crown 4) after setting up the Para-Post, restore with composite core, then cover with the PPM crown. After restoration, in order to observe the concentration of stress at internal portion of the teeth and the sourrounding periodontal tissue, developing a 2-dimensional finite element model of labiopalatal section, then loading forces from 3 direction - direction of 45 degrees from lingual side near the incisal edge, horizontal direction from labial height of contour, vertical direction at the incisal edge-were applied. The analyzed results were as follows: 1. Stress of the normal central incisor was concentrated on the dentin aroundpulp chamber, labiocervical portion of a tooth and root apex, but with the alveolar bone, in the case of load from the direction of 45 degrees from lingual side near the incisal edge showed remarkable concentration of stress: 2. Coronal-radicular amalgam technique -showed less concentration of stress on the root and surrounding periodontal tissue than the restoration with the Para-Post. 3. The von Mises equivalent stress on the Para-Post showed maximum value at root-core junction rather than both ends and model with PPM restoration with amalgam core showed the least concentration of stress. Only the force from horizontal direction showed large shear stress on internal portion of the root, root apex and alveolar bone. 4. PPM crown with composite core rarely showed the concentration of stress on root and periodontal tissue. 5. As for alveolar bone, remarkable shear stress was concentrated on labial and palatal side by horizontal load.

• 한국환경복원기술학회지
• /
• 제5권4호
• /
• pp.19-30
• /
• 2002

The stability of slope using root-pile like to the reinforcements is affected by the interaction behavior mechanism of soil-reinforcements. Through the studying on the interaction in joint of its, therefore, the control roles can be find out in installed slope. In study, the stress level ratio based on the insert angle of installed reinforcements in soil used to numerical analysis, which was results from the duty direct shear test in Lab. The maximum shear strain variation on the reinforcements was observed at insert angle, which was approximately similar to the calculated angle based on the equation proposed by the Jewell. The elasto-plastic joint model on the contact area of soil-reinforcements was presumed, the reinforced soil assumed non-linear elastic model and the reinforcements supposed elastic model, respectively. The finite element analysis of assumed models was performed. The shear strain variation of non-reinforced state obtained by the FEM analysis including elasto-plastic joint elements were shown the rationality of general limit equilibrium analysis for the slope failure mode on driving zone and resistance zone, which based on the stress level step according to failure ratio. Through the variation of shear strain for the variation of inserting angle of reinforcements, the different mechanism on the bending and the shear resistance of reinforcements was shown fair possibility.

• Journal of Forest and Environmental Science
• /
• 제26권3호
• /
• pp.193-202
• /
• 2010

To analyze the effects of tree roots on the stability of damage slope, distributional and physical properties of five-year Pinus densiflora roots were investigated. In the composition of roots, the proportion of main root to lateral root was 1 to 9 in slope condition. Root tensile force was increased in accordance with increased proportion to diameter of Pinus densiflora roots. However, tensile strength was decreased in proportion to diameter of roots. Root shear strength showed that soil containing Pinus densiflora roots was higher than that of non-treated soils. This result shows that Pinus densiflora roots significantly stabilize the surface-soil rather than sub-soil in damage slopes.

• 한국산림과학회지
• /
• 제94권4호통권161호
• /
• pp.281-286
• /
• 2005

수목은 뿌리에 의한 토양수분의 제거와 기계적인 보강효과를 통해 토괴가 사면 하부로 이동하는 것을 막아 안정하게 하는 역할을 한다. 본 연구는 자연사면상에서 이런 보강효과를 정량화하기 위해, 표준사에 다른 형태로 수목의 뿌리를 내재시켜 직접전단시험을 실시하였으며, 공시뿌리로서는 잣나무가 이용되었다. 실험은 뿌리가 내재된 것과 그렇지 않은 토양에서 실시하였으며, 여러 수준의 수직구속 압력에서 최대 전단저항력을 측정하였다. 뿌리에 의해 증가된 토양전단저항력은 측정된 토양의 내부마찰각과 점착력 등의 토양변수를 이용하여 계산하였으며, 전단상자내의 뿌리배열에 의한 효과도 함께 분석하였다. 실험결과 전단저항력은 뿌리의 개수와 직경이 증가할수록 증가하였으며, 뿌리의 배열 형태가 십자 배열일 때 가장 큰 효과를 나타내었다. 또한 실험을 통해 확인한 전통적인 토양보강 모델과의 비교에서는 기존 모델의 선형성으로 실제 실험 결과와 일치하지 않는 경향을 나타내었다.

• Restorative Dentistry and Endodontics
• /
• 제23권1호
• /
• pp.163-174
• /
• 1998

The purpose of this study is to evaluate the distribution of stress in the root end resected teeth. The finite element method was used to compare stresses along the root and retrograde filling material in seven two-dimensional models of mandibular 2nd premolar. Each model was endodontic treatment and gold crown' restoration. Each model divided with amagam core restoration or gold casting post restoration. Thus each model divided with shape of root end resection, depth of retropreparation and exposure length of root in the bony cavity. The seven models were classified as in the table 1 below. A load of 500N was applied $45^{\circ}$ diagonally on the lingual slope of the buccal cusp. These mode were analyzed with two dimensional finite element methods. The results of this study were as follows : 1. The maximum tensile stress along the inner canal wall was shown on the model 7. 2. When the model 1 was compared with the model 5, the maximum tensile stress along the inner canal wall showed the model 1. 3. Less equivalent stress was shown on the model 6 and more equivalent stress was shown on the model 4. 4. More shear stress was shown on the retrograde filling material of the model 7. 5. The models with increased length of exposed root in the bony cavity demonstrated a gradual increase to the tensile stress in X direction which occurred approximately a boundary between the bone and exposed root in' the bony cavity. 6. The model which had a case of matching the apex of post and a boundary between the bone and exposed root in the bony cavity demonstrated more increase tensile stress in X direction than other models.

• 대한기계학회논문집A
• /
• 제20권6호
• /
• pp.1784-1797
• /
• 1996

The disk/blade assembly of a turbine engine is made in the shape of a dovetail type or a fir-tree type. Since disk fillet regions or contact surfaces undergo high stress comcentration, fatigue cracks frequentrly occur in the disk/blade assembly. Therefore, it is necessary to analyze the stress distributions in the fir-tree type disk/balde assembly and predict the region of fatigue failure. The stress distributions of the disk/blade assembly were investigated by using the photoelastic method and the finite element method. Two dimensional photoelastic techniques were used to investigate the stress distributions of contact surfaces and fillet regions. TH stress distributions were obtained by the shear-difference method and were compared to the finite element results. It was found that maximum tensile stresses were higher in the fillet region thatn in the contact surfaces of the fir-tree models. The finite element results showed good agreement with the experimental results.