• Restorative Dentistry and Endodontics
• /
• v.42 no.2
• /
• pp.105-110
• /
• 2017

Objectives: This study investigated the cleaning ability of ultrasonically activated irrigation (UAI) and a novel activation system with reciprocating motion (EC, EasyClean, Easy Equipamentos $Odontol\acute{o}gicos$) when used with a relatively new chelating agent (QMix, Dentsply). In addition, the effect of QMix solution when used for a shorter (1 minute) and a longer application time (3 minutes) was investigated. Materials and Methods: Fifty permanent human teeth were prepared with K3 rotary system and 6% sodium hypochlorite. Samples were randomly assigned to five groups (n = 10) according to the final irrigation protocol: G1, negative control (distilled water); G2, positive control (QMix 1 minute); G3, QMix 1 minute/UAI; G4, QMix 1 minute/EC; G5, QMix 3 minutes. Subsequently the teeth were prepared and three photomicrographs were obtained in each root third of root walls, by scanning electron microscopy. Two blinded and pre-calibrated examiners evaluated the images using a four-category scoring system. Data were statistically analyzed using Kruskal-Wallis and Dunn tests (p < 0.05). Results: There were differences among groups (p < 0.05). UAI showed better cleaning ability than EC (p < 0.05). There were improvements when QMix was used with auxiliary devices in comparison with conventional irrigation (p < 0.05). Conventional irrigation for 3 minutes presented significantly better results than its use for 1 minute (p < 0.05). Conclusions: QMix should be used for 1 minute when it is used with UAI, since this final irrigation protocol showed the best performance and also allowed clinical optimization of this procedure.

• Mycobiology
• /
• v.51 no.4
• /
• pp.230-238
• /
• 2023

Glabridin is a well-known active isoflavone found in the root of licorice (Glycyrrhiza glabra L.) that possess a wide range of biological activity. Plant cells, hairy roots, and fungal endophytes cultures are the most important alternative methods for plant resources conservation and sustainable production of natural compounds, which has received much attention in recent decades. In the present study, an efficient culture condition was optimized for the biomass accumulation and glabridin production from fungal endophyte Aspergillus eucalypticola SBU-11AE isolated from licorice root. Type of culture medium, range of pH, and licorice root extract (as an elicitor) were tested. The results showed that the highest and lowest biomass production was observed on PCB medium (6.43 ± 0.32 g/l) and peptone malt (5.85 + 0.11 g/l), respectively. The medium culture PCB was produced the highest level of glabridin (7.26 ± 0.44 mg/l), while the lowest level (4.47 ± 0.02 mg/l) was obtained from the medium peptone malt. The highest biomass (8.51 ± 0.43 g/l) and glabridin (8.30 ± 0.51 mg/l) production were observed from the PCB medium adjusted with pH = 6, while the lowest value of both traits was obtained from the same medium with pH = 7. The highest production of total glabridin (10.85 ± 0.84 mg/l) was also obtained from the culture medium treated with 100 mg/l of the plant root extract. This information can be interestingly used for the commercialization of glabridin production for further industrial applications.

• Tunnel and Underground Space
• /
• v.31 no.6
• /
• pp.508-519
• /
• 2021

In this study, a model was developed to predict the peak particle velocity (PPV) that affects people and the surrounding environment during blasting. Four machine learning models using the k-nearest neighbors (kNN), classification and regression tree (CART), support vector regression (SVR), and particle swarm optimization (PSO)-SVR algorithms were developed and compared with each other to predict the PPV. Mt. Yogmang located in Changwon-si, Gyeongsangnam-do was selected as a study area, and 1048 blasting data were acquired to train the machine learning models. The blasting data consisted of hole length, burden, spacing, maximum charge per delay, powder factor, number of holes, ratio of emulsion, monitoring distance and PPV. To evaluate the performance of the trained models, the mean absolute error (MAE), mean square error (MSE), and root mean square error (RMSE) were used. The PSO-SVR model showed superior performance with MAE, MSE and RMSE of 0.0348, 0.0021 and 0.0458, respectively. Finally, a method was proposed to predict the degree of influence on the surrounding environment using the developed machine learning models.

• Journal of agriculture & life science
• /
• v.50 no.5
• /
• pp.81-93
• /
• 2016

Rehmannia glutinosa(Gaertn.) DC. is a herbaceous perennial plant and belonging to the Scrophulariaceae and used as roots for medicinal part and purpose. R. glutinosa is and usually used for fresh rehmannia root or prepared rehmannia root. However, it is very difficult to propagate using the seeds because of lack germination so it is propagated using the vegetative method as the rootstock. Currently, propagation and harvesting using the rootstock of R. glutinosa has difficulties about production of the high quality and quantity in R. glutinosa because of root rot disease. To optimize in vitro cultures and to improve the rootstock and seedling of R. glutinosa after morphological and genetical determination, 5 plant culture media (MS, DJ, LS, QL, and WPM) were used in this study then WPM was selected for better growth, for multiplication condition(WPM + IAA 1.0 mg/L + IBA 0.5 mg/L), and for root enlargement condition(WPM + NAA 0.1 mg/L) of R. glutinosa. Based on these results, in vitro seedlings of R. glutinosa were transferred to soil for acclimation with environment adaptation and shown the positive effects about root enlargement and root formation. Therefore, it can be used for high quality of R. glutinosa production and production of the rootstock based on propagation using in vitro seedlings of R. glutinosa.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.6
• /
• pp.235-242
• /
• 2007

Network Mobility Basic Support protocol reduces location-update signaling by making network movements transparent to the mobile nodes (MNs) behind the mobile router (MR), but causes some problems such as sub-optimal routing and multiple encapsulations. This paper proposes an Route Optimization Employing HMIP Extension for Mobile Networks (ROHMIP) scheme for nested nubile networks support which introduces HMIP concept with relation information between MNNs behind a MR and the MR in order to localize handoff, to optimize routing and especially reduce handoff signal overhead. With ROHMIP, a mobile network node (MNN) behind a MR performs route optimization with a correspondent node (CN) as the MR sends a binding update message (BU) to mobility anchor point (MAP) via root-MR on behalf of all active MNNs when the mobile network moves. This paper describes the new mechanisms and provides simulation results which indicate that our proposal reduces transmission delay, handoff latency and signaling overhead.

• Journal of Plant Biotechnology
• /
• v.49 no.3
• /
• pp.207-212
• /
• 2022

The optimal culture conditions for root organogenesis from the callus of peonies (Paeonia lactiflora Pall.) were investigated. Root explants with vascular bundles were cultured in Murashige and Skoog (MS) medium combined with 0.5-4.0 mg/L auxins (indole acetic acid [IAA], naphthalene acetic acid [NAA], indolebutyric acid [IBA], and 2,4-dichlorophenoxyacetic acid [2,4-D]) and 0.0-2.0 mg/L cytokinins (kinetin, zeatin, and benzylaminopurine [BAP]) to induce callus formation. The callus was then cultured in MS medium combined with three concentrations (0.1, 0.5, and 1.0 mg/L) of IAA, NAA, IBA, kinetin, zeatin, and BAP in the dark for 6 weeks. Based on the results, the effects of dark and light conditions on the callus cultured in MS medium with combinations of 0.1-1.0 mg/L IBA and zeatin for 6 weeks were studied. Callus formation was most effective (>+++) in the medium with a combination of 1.0 mg/L NAA and 1.0 mg/L zeatin. A high number of long adventitious roots were observed in the mediums with 0.1 mg/L IBA (6.66 and 4.82 cm) and 0.5 mg/L zeatin (2.32 and 0.72 cm) among auxins and cytokinins, respectively. The highest number (14.06) of adventitious roots were formed from the callus cultured in light in the MS medium combined with 0.1 mg/L IBA and 0.5 mg/L zeatin. This same medium induced the formation of the longest adventitious root (5.45 cm) in the dark. Thus, optimization of in vitro culture conditions may be possible for the mass propagation of adventitious roots in peonies.

• Journal of the Society of Naval Architects of Korea
• /
• v.52 no.5
• /
• pp.372-379
• /
• 2015

The blade root fillets which have strong influences on the performance of propellers in the both structural and hydrodynamic points of view, are mechanical parts for smooth connection surface with a blade and a hub. A few related researches (Sabol, 1983; Kennedy, 1997) have noted that 3T-T/3 double radius section design would be suitable for reducing Stress Concentration Factor(SCF) and increasing Cavitation Inception Speed(CIS). In this paper, it is confirmed that this compound cross-section design has come close to the optimum solution in the shape optimization standpoint so that it could protect the propeller blade under the frequent and various loading cases. On that basis, we suggest the definite and simple fillet design methodology that has the cross-section with nT-T/n compound radius and elliptic shape which could sustain the given derivatives information as well as the offsets at the boundary and all inner region of the fillet surface. In addition, the result of design is presented in form of IGES file format in order to connect with NC machine seamlessly.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.33 no.4
• /
• pp.591-599
• /
• 2023

Due to the recent attack by Castryck-Decru, the private key of SIDH can be recovered in polynomial time so several methods have been proposed to prevent the attack. Among them, M-SIDH proposed by Fouotsa et al, counteracts the attack by masking the torsion point information during the key exchange. In this paper, we implement M-SIDH and evaluate its performance. To the best of our knowledge, this is the first implementation of M-SIDH in C language. Toward that end, we propose a method to select parameters for M-SIDH instantiation and propose a 1024-bit prime for implementation. We implemented the square-root Velu formula over the extension field for further optimization. As a result, 1129 ms is required for a key exchange in the case of MSIDH-1024, providing the classic 64-bit security level.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.8
• /
• pp.627-635
• /
• 2012

This study aims at developing an artificial neural network(ANN)-based predictive and adaptive temperature control method to control the openings at internal and external skins, and heating systems used in a building with double skin envelope. Based on the predicted indoor temperature, the control logic determined opening conditions of air inlets and outlets, and the operation of the heating systems. The optimization process of the initial ANN model was conducted to determine the optimal structure and learning methods followed by the performance tests by the comparison with the actual data measured from the existing double skin envelope. The analysis proved the prediction accuracy and the adaptability of the ANN model in terms of Root Mean Square and Mean Square Errors. The analysis results implied that the proposed ANN-based temperature control logic had potentials to be applied for the temperature control in the double skin envelope buildings.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.8
• /
• pp.2253-2261
• /
• 1999

ACK generates optimized code using the string pattern matching technique in pattern table generator and peephole optimizer. But string pattern matching method is not effective due to the many comparative actions in pattern selection. We designed and implemented the EM intermediate code optimizer using tree pattern matching algorithm composed of EM tree generator, optimization pattern table generator and tree pattern matcher. Tree pattern matching algorithm practices the pattern matching that centering around root node with refer to the pattern table, with traversing the EM tree by top-down method. As a result, compare to ACK string pattern matching methods, we found that the optimized code effected to pattern selection time, and contributed to improved the pattern selection time by about 10.8%.