• 한국융합학회논문지
• /
• 제4권1호
• /
• pp.33-41
• /
• 2013

This paper presents an adaptive recursive least squares algorithm (ARLS) for detecting voltage sag and voltage swell events in power systems. Different methods have been developed to detect voltage sag and voltage swell. Some of them use window techniques, which are too slow when voltage sag or swell mitigation is required. Others depend on the extraction of a single non-stationary sinusoidal signal out of a given multi-components input signal, and therefore they don't consider the harmonic components in calculating the voltage root mean square value (rms). The method, proposed in this paper, is capable of estimating the voltage rms taking into account all harmonic components. The method is tested by applying it to different, simulated signals using ATP program, and compared with voltage sag detection algorithms.

• Communications for Statistical Applications and Methods
• /
• 제13권1호
• /
• pp.19-27
• /
• 2006

Outliers in survey are a perennial problem for applied survey statisticians to estimate the total or mean of population. The influence of outliers is more increasing as they have large weights in survey sampling. Many techniques have been studied to lower the impact of outliers on sample survey estimates. Outliers can be downweighted by winsorization or reducing the weight of outliers. The weight reduction is more reasonable than replacing one outlier by one value of non-outliers, because it has at least one unit. In this paper, we suggest the square root transformation of weight as the weight reduction method. We show this method is efficient with real data, and it's also easy to apply in practical affairs.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 학술대회 논문집
• /
• pp.72-74
• /
• 2003

We fabricated textured Ag substrates for coated conductor and evaluated the effects of annealing temperature on microstructural evolution, texture formation, and surface morphology. A strong {110}〈110〉 textured Ag substrate was obtained by cold rolling and annealing at 80$0^{\circ}C$: the full-width at half-maximum(FWHM) value of {110}〈110〉 poles was as sharp as 10$^{\circ}$. Surface morphology was evaluated by using Atomic force microscopy(AFM). Root-mean-square(RMS) roughness of the substrate annealed at 80$0^{\circ}C$ was 39.2 nm. The substrate of strong texture and smooth surface, fabricated in our study, is considered to be suitable for use as a substrate for deposition of superconductor films.

• 디지털산업정보학회논문지
• /
• 제5권4호
• /
• pp.127-137
• /
• 2009

This paper is proposed that in-output Digital module is acquired a vibration signal of a rotating machinery by Data Acquisition System. The module is designed to get ride of nose through low pass filter on the vibration signal from sensors and set the gain value for being able to sampling AC to DC, and also the sampled data by sampler and the conversed data by DIP/FPGA is supplied to the analyzer for analysis at a software tool. The DIP(Digital Signal Processor) of the Digital input/output Board makes Average voltage, Peak to Peak voltage, RMS(Root Mean Square) and Gap voltage, also FFT(Fast Fourier Transform) for rotating vibration diagnosis.

• 한국전기전자재료학회논문지
• /
• 제13권10호
• /
• pp.805-811
• /
• 2000

Reliability of PBGA(plastic ball grid array) package is weak compared with normal plastic packages. The low reliability is caused by low resistance to the popcorn cracking, which is generated by moisture absorption in PCB(prited circuit board). In this paper, plasma treatment process was used and we analyzed its effects to interface adhesion. The contents of C and Cl decrease after plasma treatment but those of O, Ca, N relatively increase. The plasma treatment improves the adhesion between EMC(epoxy molding compound) and PCB(solder mask). The grade of improvement was over 100% Max, which depends on the properties of EMC. The RMS(root mean square) roughness value of the solder mask surface increases to plasma treatment. There is little difference of adhesion in RF power and treatment time.

• 연구논문집
• /
• 통권31호
• /
• pp.77-88
• /
• 2001

In this paper, the critical vibration limits of a spindle unit for a high speed ball pen tip processing machine are studied. The vibration of the spindle is measured by FFT, and the influence of the vibration amplitude due to unbalance, bearing deflect, bite, and timing belts tension is analyzed. The critical vibration limits of the spindle is determined by the X, and Z directional vibrations of the spindle. Both FET and RMS values can be used to analyze the vibration characteristics of the spindle. From experimental results the limit line can be drawn for the spindle. The RMS value for the vibration limit is 3 G.

• 한국진공학회지
• /
• 제8권3A호
• /
• pp.218-223
• /
• 1999

We investigated the interfacial reactions between the $Y_2O_3$ film deposited by ICB processing and p-type (100) Si substrates upon annealing treatments in $O_2$ and Ar gas ambients. we also investigated the evolution of surface morphology of ICB deposited $Y_2O_3$ films upon annealing treatments. We observed that the root-mean-square(RMS) value of surface roughness measured by AFM increased with annealing time at $800^{\circ}C$ in $O_2$ ambient, while the change of surface roughness was not observed in Ar ambient. We also found the growth of $SiO_2$ layer and the formation of yttium silicate layer. From the capacitance values $(C_{acc})$ measured by C-V measurements, the relative didldctric constant of $Y_2O_3$ film in metal-insulator-semiconductor(MIS) structure was estimated to be about 9.

• Journal of the korean society of oceanography
• /
• 제39권4호
• /
• pp.222-233
• /
• 2004

Using nitrogen as the limiting nutrient, the default version of a microplankton-detritus model linked chlorophyll concentration to the autotroph nitrogen. However, phosphorus dynamics were added to simulate the results of a microcosm experiment. Using standard parameter values with a single value of microheterotroph fraction in the microplankton taken from the observed range, the best simulation successfully captured the main features of the time-courses of chlorophyll and particulate organic carbon, nitrogen and phosphorus, with root-mean-square error equivalent to 29% of particulate concentration. A standard version of microbiological model assumes complete internal cycling of nutrient elements; adding a term for ammonium and phosphate excretion by microheterotrophs did not significantly improve predictions. Relaxing the requirement for constant microheterotroph fraction resulted in an autotroph-heterotroph model AH, with dynamics resembling those of a Lotka-Volterra predator-prey system. AH fitted the microcosm data worse than did MP, justifying the suppression of Lotka-Volterra dynamics in MP. The paper concludes with a discussion of possible reasons for the success of the simple bulk dynamics of MP in simulating microplankton behaviour.

• 한국기계기술학회지
• /
• 제13권3호
• /
• pp.57-64
• /
• 2011

Vibrations on the floor in a car are transmitted to the foot, hip, and back from the seat. Human body recognizes these vibrations, but the sensitivity for each vibration is different. To evaluate these vibrations, RMS(root mean square) of accelerations, VDV(vibration does value) are commonly used. The ride comfort evaluation is usually carried out by experiments of real cars which are expensive. The purpose of this paper is to briefly review the status of several ride vibration standards and criteria having relevance to construction machinery vehicles and to suggest recommendations for the effective use of such criteria in vehicle / component development.

• Journal of Magnetics
• /
• 제18권3호
• /
• pp.283-288
• /
• 2013

This paper presents structural topology optimization that is being applied for the design of electromagnetic vibration energy harvester. The design goal is to maximize the root-mean-square value of output voltage generated by external vibration leading structures. To calculate the output voltage, the magnetic field analysis is performed by using the finite element method, and the obtained magnetic flux linkage is interpolated by using Lagrange polynomials. To achieve the design goal, permanent magnet is designed by using topology optimization. The analytical design sensitivity is derived from the adjoint variable method, and the formulated optimization problem is solved through the method of moving asymptotes (MMA). As optimization results, the optimal location and shape of the permanent magnet are provided when the magnetization direction is fixed. In addition, the optimization results including the design of magnetization direction are provided.