• Journal of the Korean Institute of Landscape Architecture
• /
• v.49 no.5
• /
• pp.59-70
• /
• 2021

This study was to investigate the measurement point of root collar diameter of landscape trees in Korea. It may contribute to avoiding disputes caused by the difference in measurement criteria of root collar diameter of landscape trees between tree growers and constructors. The difference between landscape trees' root collar diameter measurement point was 3.59cm from 6cm underground to the surface and 1.35cm from 0cm to 6cm above ground. The source root collar diameter measurement point difference was larger in the basement than in the ground. The standard deviation of the root collar diameter of the landscape tree was 0.64 from 6cm underground to the surface, and the difference in standard deviation from 0cm to 6cm above ground was 0.16. The difference by measurement point of the root collar diameter was larger in the basement than in the ground. It has been proposed to set the reasonable measurement point of the landscaping tree root collar diameter at the inflection point where the standard deviation of the tree trunk diameter is the smallest in line with the size change of the standard for each root collar diameter measurement point. By tree species, Cornus officinalis Siebold & Zucc. 18cm above the ground, Chionanthus retusus Lindl. & Paxton. 12cm above the ground, Zelkova serrata (Thunb.) Makino. 12cm above the ground, Celtis sinensis Pers. 12cm above the ground, Styrax japonicus Siebold & Zucc. 10 cm above the ground, Cornus officinalis Siebold & Zucc. 10cm above the ground, Acer palmatum Thunb. ex Murray. 6cm above the ground, Ilex rotunda Thunb. 6cm above the ground, Quercus myrsmaefolia Blume. 4cm above the ground, Lagerstroemia indica L. 2cm above the ground The above heights were shown as reasonable measurement points. The difference by landscape tree root collar diameter measurement site showed that the standard deviation was small throughout the tree species, and the reasonable average measurement point with a stable slope of the deviation was 12cm or more on average. It can be said that the reasonable measurement point of the root collar diameter of a landscape tree is set at an average of 12cm above the ground. However, recognizing 30cm, which is a familiar ruler(尺) in traditional practices, is quick, It was recommended to measure at the height of 30cm from the surface for a reasonable measurement point of the root collar diameter of a landscape tree, for the uniformity of measurement standards.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.249-252
• /
• 2006

This paper introduces a review and literature study of offshore engineering and constructions from 1920s to 2000s. The study was focused on the literature survey and the history of Brown & Root and J. Ray McDermott in the Gulf of Mexico and other offshore areas Understanding the offshore history and background of offshore development is an essential ingredient for the initial conceptual design. This study was motivated to enhance the capacity of conceptual design and Front End Engineering Design (FEED) of offshore structures in Korea.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.7 no.1
• /
• pp.85-93
• /
• 2011

2010 trend of Web services is Social Network Service. What does Social Network Service are like this? What could really be used? I also take advantage of future can I do? To elicit answers to the question of Social Network Service and the overall status of the root is used in the case Learn about the current utilization plan after the proposed research. The use of practices being applied to Social Network Service, the three theories were derived positive and negative aspects. Research based on more than the utilization of Social Network Service to build a social safety net to take advantage and use of learning aids were divided into suggestions. Utilized for building a social safety net, and when the reported channel to channel, the use of learning aids to learning that one day, one-on learning by applying the proposed total of four kinds of utilization.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.3
• /
• pp.128-136
• /
• 2011

In order to investigate the relationship between the prices of wood chips and pulps, regression analysis and cointegration test were conducted. Test results indicated that pulp producers adjusted pulp price in response to the change in wood-chip price and there were a long-run relationship between these prices. This implied that by raising the selling price of pulp, pulp producers avoid profit loss incurred by the increase in the wood-chip price. The existence of cointegration between wood chips and pulp prices implied that pulp producers were competing when they set the selling price of pulp.

• Journal of Fashion Business
• /
• v.1 no.1
• /
• pp.53-70
• /
• 1997

The purpose of this thesis is to make clear particulartity of young adult generation which leads industry in their demands so that fashion trends are foresaw, and to describe style of costume satisfied with picture of new male. This thesis is to consider young adult style of costume in terms of double root described by W$\ddot{o}$lfflin in the internal meaning and the external form, so as to analyze their unique style. In conclusion, domestic young adult style of costume is embodied in the internal meanings of individuality, aestheticism and new classicism in terms of the external forms which means body-priority-form by open-form, whole-form, integration-form, rounded-form, indeterminate-form. With these results, domestic fashion industry is demanded to be from classic to modern expressions so as to be reflected in sophisticated masculinity of young adult.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.5 no.4
• /
• pp.127-137
• /
• 2009

This paper is proposed that in-output Digital module is acquired a vibration signal of a rotating machinery by Data Acquisition System. The module is designed to get ride of nose through low pass filter on the vibration signal from sensors and set the gain value for being able to sampling AC to DC, and also the sampled data by sampler and the conversed data by DIP/FPGA is supplied to the analyzer for analysis at a software tool. The DIP(Digital Signal Processor) of the Digital input/output Board makes Average voltage, Peak to Peak voltage, RMS(Root Mean Square) and Gap voltage, also FFT(Fast Fourier Transform) for rotating vibration diagnosis.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.1
• /
• pp.39-45
• /
• 2014

This paper proposes an architecture of a sensor network for gathering data under a powerful beam cluster tree architecture. This architecture is used when there is a need to gather data from sensor node where there is no sink node connected to an existing network, or it is required to get a series of data specific to an event or time. The transmit distance of the beam signal is longer than that of the usual sensor node. The nodes of the network make a tree network when receiving a beam message transmitting from the powerful root node. All sensor nodes in a sink tree network synchronize to the superframe and know exactly the sequence value of the current superframe. When there is data to send to the sink node, the sensor node sends data at the corresponding allocated channel. Data sending schemes under the guaranteed time slot are tested and the delay and jitter performance is explained.

• The Journal of Economics, Marketing and Management
• /
• v.8 no.1
• /
• pp.12-19
• /
• 2020

Purpose - Strategic causes for the failure include unrealistic growth, overexpansion, unfamiliar new markets, volume obsession, unrealistic promises and poor project selection. Organizational causes are insufficient capital and profits, lack of business knowledge, poor financial management, poor sales skills, inadequate marketing, poor leadership, poor leadership transfer, project losses, poor field performance and owner bankruptcy. Uncontrollable causes include industry and economic weakness and banking and surety changes. While helpful, the list provides insufficient clarity regarding the causal roots of failure. Research design, data and methodology - The research framework to organize the information involved with many of the recent and large failures in the industry. Results - This research then identified five dominant root causes - excessive egoism, poor strategic leadership, too much change, loss of discipline and inadequate capitalization. Conclusion - Finally, additional input from external forces may accelerate the firm's pace to failure. It is important on the development of diagnostic tools that are based on this model and that will provide new ways to assess a conglomerate's level of risk for incurring a financial crisis.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.250-251
• /
• 2021

A subcontract work order is the basis of the construction process and consists of the root and trunk of the construction industry. The construction process through a subcontract work order is an important element of project success, and it is the basic unit of creating profit in the construction industry. Therefore, correct analysis and forecasting of subcontract work orders allow correct estimation of construction cost and profit which is the foundation of corporate decision making. This study has started to provide predictions of subcontractor's bidding-ratio for decision-making. Since the actual project data has been used in this study, the contribution level of the model is highly expected in actual field. The statistical confidential level of adjusted decision coefficient is concluded low because of limited sample numbers. However, its accuracy and confidence level can be increased through increasing sample numbers, considering more variables, and studying of reducing error.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.6
• /
• pp.875-885
• /
• 2023

This research delves into the evolving interplay between occupational diseases, work-related illnesses, and accidents in the construction industry, focusing on the past twenty years. One significant discovery is the 19-fold escalation in reported occupational diseases, prompting an examination of their root causes and connections to workplace environments. Frequently encountered work-related ailments include physically strenuous tasks, low back pain, and cerebrovascular issues, highlighting the need for robust prevention and management approaches. Predominantly, noise-induced hearing loss and pneumoconiosis are the most common occupational diseases. The study unveils notable correlations between specific work-related illnesses and accidents, indicating the necessity for bespoke safety measures. Additionally, a pronounced association between work-related illnesses and occupational diseases offers insights into underlying risk factors. Remarkably, the findings propose a bidirectional link between occupational diseases and accidents, challenging traditional beliefs about causality. These insights are pivotal for enhancing safety protocols, focusing on preventive measures, and foreseeing occupational diseases that may arise following accidents in the construction industry.