• Journal of Welding and Joining
• /
• v.29 no.3
• /
• pp.64-69
• /
• 2011

Since welding process for most pipelines with large diameter has been carried out by the manual process, automation of the welding process is necessary for the sake of consistent weld quality and improvement in productivity. Therefore the development of the optimized algorithm to decide the welding condition is an effective technique to prove the feasibility of interface standards and intelligent control technology to increase productivity and reduce the cost of system integration. In this study, the pipe welding experiment has been carried out using plused GMA welding process to select optimal welding condition. And necessary information in root-pass welding has been obtained by applying in the pipeline using the selected welding conditions through the welding experiment.

• Archives of Plastic Surgery
• /
• v.40 no.5
• /
• pp.546-552
• /
• 2013

Background The zygoma is a major portion of the midfacial contour. When deformity occurs in this area, a reduction should be conducted to correct it. If a sagittal fracture at the temporal root of the zygomatic arch occurs, this also requires reduction, but it is difficult to approach due to its anatomical location, and the possibility of fixation is also limited. Thus, the authors attempted the reduction of sagittal fracture by two- or three-point fixation and the Gillies approach without direct manipulation. The preoperative and postoperative results of the patients were evaluated. Follow-up was performed to establish a treatment guideline. Methods A retrospective study was done with 40 patients who had sagittal fractures at the temporal root of the zygomatic arch from March 2009 to June 2012. Only two- or three-point fixation was performed for the accompanying zygomatic-orbital-maxillary fracture. The Gillies approach was used for complex fractures of the zygomatic arch, while the temporal root of the zygomatic arch was only observed without reduction. Preoperative and postoperative computed tomography and X-ray scans were performed to examine the results. Results The result of the paired t-test on preoperative and postoperative bone gap differences, the depression level, and the degree of temporal protrusion showed a marked decrease in the mean difference at a 95% confidence interval. The results were acceptable. Conclusions In the treatment of sagittal fractures at the temporal root of the zygomatic arch, it is acceptable to use indirect reduction and non-fixation methods. This leads to a satisfactory aesthetic and functional outcome.

• Restorative Dentistry and Endodontics
• /
• v.22 no.2
• /
• pp.739-750
• /
• 1997

Treatment of root perforation elicits special considerations due to its blood-contaminated circumstances. It is known that conventional dental restorative materials are all leaking. Calcium sulfate is the material which react with water to become chemically set. This study, therefore, was performed to develop a new compound containing calcium sulfate and to evaluate its physical and biological characteristics. Three materials were used, IRM, calcium sulfate, calcium sulfate-hydroxyapatite compound. The composition of the calcium sulfate-hydroxyapatite compound was basically 50 % of calcium sulfate and 50 % of hydroxyapatite mixed with guajacol. The materials were mixed in conventional way and underwent four physical test procedures, setting time, solubility test, compressive strength, and marginal leakage test. All materials were evaluated under the scanning electron microscope to examine the marginal sealing ability. Animal experiment was also performed to test the materials' tissue response. Twenty-four dog's premolars were tested with either furcation perforations or apical retro-fillings. From the results, we found that calcium sulfate possess the good marginal sealing ability. However, calcium sulfate creates many voids which is caused by crystal thrusting action when it reacts with water. It seemed that the voids caused disintegration of the material which eventually lead to tissue reaction. By compounding calcium sulfate and hydroxyapatite, we were able to obtain the better physical properties but it showed larger marginal gap between the material and the root surface. Within the six weeks observation period, both IRM and calcium sulfate-hydroxyapatite compound showed good tissue responses in animal experiment. It is concluded that calcium sulfate would be the material of choice in root perforation repair, but the physical property needs to be further improved.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.221-221
• /
• 2022

Chromosome breakage occurred by DNA methylation inhibitor. Zebularine is known as DNA methylation inhibitor and suitable for water solubility among different DNA methylation inhibitors as 5-Azacytidine and 5-aza-2'-deoxycytidine. We used zebularine as mutagen according to different methods by roots absorption and seed imbibition. After zebularine treatment, DNA methylation inhibitor, we observed mitotic chromosome behavior what is different according to two different treatment methods. First, seed imbibition treatment in 1,000 μM of zebularine solution for 72 hours in dark conditions. The second treatment to seedlings of Keumkang was also treated in 1,000 μM of zebularine solution for 72 hours after germination. Root and shoot showed different elongations in each treatment. Root absorption treatment(3.01±0.48, 2.00±0.26) showed the shortest elongation in root and shoot than control(8.16±0.61, 4.03±0.48) and seed imbibition treatment(4.33±0.80, 2.48±0.36). It can be explained root tip meristematic cell activity was damaged by DNA methylation inhibitor. Primary root tips were collected in DW for 24 hours at low temperature(0℃) and fixed in fixation solution for 3 days to chromosome observation in mitosis. Mitotic index, chromosome structure and chromosome aberration were observed by phase-contrast microscope. Mitotic index of the control(0.29) showed twice mitotic cells as the treated groups(imbibition 0.15, absorption 0.14). Observation of chromosomes showed some short chromosomes and loosen chromosomes affected by zebularine. It is considered because of zebularine damage DNA in mitosis. We observed "gap by chromosome breakage" in chromosomes that have loose parts between centromere and telomere. It seems demethylation of zebularine occurs chromosome breakage.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2005.04a
• /
• pp.188-189
• /
• 2005

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2005.10b
• /
• pp.326-327
• /
• 2005

• The Korean Journal of Pesticide Science
• /
• v.19 no.1
• /
• pp.14-21
• /
• 2015

To determine residual characteristics of azoxystrobin in ginseng under different cultivation conditions such as use of straw mat on cultivation soil and filling gap between ginseng stem and soil surface and also to elucidate its approximate behavior after spraying, 20% azoxystrobin suspension concentrate solution was sprayed 4 times onto 5-year-old ginseng with 10 days interval at a application rate of about 200 L/10 a and then residues in samples were analyzed. The residue level was lower in case of use of straw mat and filling the gap with soil than in case of no use of straw mat and no filling the gap, representing that use of straw mat and filling the gap with soil were contributed to decrease of pesticide residues in ginseng. A large portion of the test pesticide distributed onto ginseng leaf with a higher specific surface area. The amounts of azoxystrobin residues decreased in ginseng leaf, while increased on soil surface, as close to harvest. About 0.1% of azoxystrobin sprayed was distributed in ginseng root and 12.7-20.4% (mean 16.6%) of azoxystrobin could be decreased for dietary intake by removing of rhizome from ginseng root before intake.

• Journal of Ecology and Environment
• /
• v.41 no.9
• /
• pp.246-255
• /
• 2017

Background: The aim of this study was to examine the resource allocation among the organs and the leaf morphology of Polygonatum humile. The data were collected from June 2014 to May 2015 in a natural P. humile stand of a temperate forest gap. Results: The dry weight of new rhizome ($R_0$) sharply decreased to the time of new shoot sprouting in next year and was constant for 2 ~ 3 years. However, dry weight of root on $R_0$ increased to the end of growth season and, thereafter, decreased slowly along the time elapsed. The correlation coefficients between the rhizome and the leaf sizes were 0.5 for the last year's rhizome ($R_1$) and 0.6 for $R_0$ and were significant at 0.1% level for $R_0$. The increase of one leaf a plant led to increase of the total leaf area, total leaf weight, and stem length. Moreover, the organ sizes' differences between two plants of the one leaf difference were almost significant at 1% level. In 11-leaf plant, the leaf length/width ratio and specific lea area increased to the second, relative leaf area to the fourth and relative leaf dry weight to the fifth, and thereafter, decreased to the last leaf. The differences in the values of these four parameters between two leaves on a stem were almost significant at 5% level. Conclusion: P. humile examined showed the close relationships between the last year's rhizome or this year's one and the shoot system (leaf and stem) sizes. The leaf number a shoot greatly influenced specific leaf area. P. humile's leaf might showed diverse morphology with leaf rank on a stem in a forest gap environment.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.30 no.4
• /
• pp.153-165
• /
• 2018

In this study, the performance of irregular wave field generation of olaFlow is first verified by comparing the frequency spectrum of the generated waves by the wave-source using olaFlow and the target wave. Based on the wave performance of irregular waves of olaFlow, the characteristics of the velocity field including the average flow velocity, longshore current and turbulent kinetic energy around the three-dimensional permeable submerged breakwaters, which act as the main external forces of the salient formation, are numerically investigated. The numerical results show that as the gap width between breakwaters decreases, the wave height in the center of the gap increases and as the gap width between breakwaters increases, the longshore currents become stronger. As a result, it is possible to understand the formation of the salient formed behind the submerged breakwaters.

• Restorative Dentistry and Endodontics
• /
• v.37 no.3
• /
• pp.136-141
• /
• 2012

Objectives: The maintenance of the healthy periodontal ligament cells of the root surface of donor tooth and intimate surface contact between the donor tooth and the recipient bone are the key factors for successful tooth transplantation. In order to achieve these purposes, a duplicated donor tooth model can be utilized to reduce the extra-oral time using the computer-aided rapid prototyping (CARP) technique. Materials and Methods: Briefly, a three-dimensional digital imaging and communication in medicine (DICOM) image with the real dimensions of the donor tooth was obtained from a computed tomography (CT), and a life-sized resin tooth model was fabricated. Dimensional errors between real tooth, 3D CT image model and CARP model were calculated. And extra-oral time was recorded during the autotransplantation of the teeth. Results: The average extra-oral time was 7 min 25 sec with the range of immediate to 25 min in cases which extra-oral root canal treatments were not performed while it was 9 min 15 sec when extra-oral root canal treatments were performed. The average radiographic distance between the root surface and the alveolar bone was 1.17 mm and 1.35 mm at mesial cervix and apex; they were 0.98 mm and 1.26 mm at the distal cervix and apex. When the dimensional errors between real tooth, 3D CT image model and CARP model were measured in cadavers, the average of absolute error was 0.291 mm between real teeth and CARP model. Conclusions: These data indicate that CARP may be of value in minimizing the extra-oral time and the gap between the donor tooth and the recipient alveolar bone in tooth transplantation.