• Journal of Periodontal and Implant Science
• /
• 제25권3호
• /
• pp.557-567
• /
• 1995

The purpose of this study was to investigated the effect of root planing and decalcified freeze dried allografts on the resorption of transplanted roots and the healing of preveously diseased recipient extraction sockets. The experimental chronic periodontitis was induced by elastic ligatures on the 2nd and 3rd mandibular premolars of 4 adult dogs, and after 8 weeks, crowns were removed and the teeth extracted. The extracted roots were split in half along the long-axis, and the extednt of plaque exposure was morked on the root surfaces with burs. The roots were either root-planed(Test group), or left uninstrumented(Control group), and transplanted in the extraction sockets with decalcified freeze-dried allografts filling the void. The flaps were sutured to cover the sockets completely. The animals were sacrificed after 12 weeks of healing, and the specimens were examined histologically. The results were as follows : 1. No signs of inflammation or disease activity were observed in either groups. 2. Replacement root resorption was observed in both groups. 3. More connective tissue attachments and less ankylosis were observed in the test groups compared to the control. 4. The unresorbed remains of DFDB particles were observed in both groups. 5. DFDB particles in the apical portion of the alveolar sockets were encased in newly-formed bone, while those in the coronal areas were seen encapsulated with connective tissue. 6. No significant difference was found between root-planed and uninstrumented roots relative to the healing and the bone fromation in the recipient extraction sockdets. From the present study, there seemed to be no significant benefits in root planing the transplanted roots or grafting the sockets with DFDB in order to curve the replacement resorption, although the root-planed roots showed more connective tissue attachments. There was also no significant benefits in root transplantation and DFDB for and enhanced healing and bone formation in alveolar extraction sockets.

• 방사성폐기물학회지
• /
• 제8권2호
• /
• pp.151-158
• /
• 2010

무에 대한 $I_2$ 증기의 작물체 침적속도와 뿌리 전류계수를 측정하기 위하여 파종 후 29 일에서 53 일 사이에 생육시기별로 작물체를 $I_2$ 증기에 80 분 간 피폭시켰다. 피폭은 오전 중에 투명한 상자 내에서 수행되었다. 침적속도($ms^{-1}$)는 대체로 $1.0{\times}10^{-4}{\sim}2.0{\times}10^{-4}$의 범위로 생육밀도가 높을수록 증가하는 경향이었다. 또한 상대습도가 높을 경우 값이 커진다는 기존 보고와 어느 정도 일치하였다. 본 침적속도는 몇몇 야외 측정치보다 수 십 배 정도 낮았고 이는 주로 피폭상자 내의 낮은 풍속($0.2\;ms^{-1}$ 내외)에 기인하는 것으로 추정되었다. 뿌리 전류계수(작물체 총침적량에 대한 수확시 뿌리 내 함유량의 비)는 다소 보수적으로 계산하여 파종 후 29 일 피폭에서 $1.3{\times}10^{-3}$, 파종 후 53 일 피폭에서는 $5,0{\times}10^{-3}$이었다. 본 실험결과의 이용에 있어서는 기상 조건, 요오드의 물리화학적 형태 등에 유의할 필요가 있다.

• 대한소아치과학회지
• /
• 제39권1호
• /
• pp.58-65
• /
• 2012

치관-치근 파절은 법랑질, 상아질, 백악질이 모두 포함된 치아의 파절로, 파절선이 대부분 절단연이나 순측의 변연부 치은에서 구개측 치은열구 하방으로 사선으로 진행된다. 파절선의 위치가 치은 연상이라면 파절편의 제거 및 치은연상 수복을 시행하고, 치은 연하라면 파절면의 외과적 노출술, 교정적 정출술, 외과적 정출술을 이용한 치아의 수복이 이루어진다. 그 외에 섬유 강화형 포스트를 삽입하여 치관 수복물의 유지력을 높이고, 레진 접착 시스템을 사용하여 치관 파절편을 재부착함으로써 생물학적으로 최소한으로 침습적인 치료를 하는 방법도 있다. 만약 파절의 정도가 치은 연하로 깊은 경우 발치나 치관절제술을 이용한 치근의 유지 등을 고려할 수 있다. 본 증례는 치관-치근파절로 내원한 12세 환아로 섬유강화형 포스트를 사용하여 치관 파절편 재부착을 시행하였으며 양호한 경과를 보여 이를 보고하는 바이다.

• Journal of Periodontal and Implant Science
• /
• 제27권3호
• /
• pp.495-514
• /
• 1997

The purpose of this study was to evaluate the in vitro effects of Nd:YAG laser irradiation on removal of a root surface smear layer after root planing in comparison with Tetracycline HCl. The 60 extracted human teeth due to severe periodontal disease were vigorously scaled and root planed with Gracey curet. Thirty specimen($5{\times}5{\times}2mm$) were obtained from root planed surface of 30 human teeth and assigned randomly to one of three groups : root planed group(5 specimen), Tetracycline HCI group(5 specimen, burnished for 5 minutes), and Nd:YAG laser group(25 specimen, German Dental Laser, Fotona Twinlight). Nd:YAG laser group was divided into 4 subgroups according to power of 1W, 1.5W, 2W, 3W at frequency to 10Hz. The specimen were then fixed, and examed by Scanning electron microscopic study. 30 of 60 human teeth used to measurement of the intrapulpal temperature rise during laser irradiation. Laser-irradiated surface exhibited various surface texture from relative flat surface to irregular surface with patent dentinal tubules of various shape and size. In some area, the root surface alteration which are carbonization, pit and crater formation and melting and resolidification were observed. The number of exposed dentinal tubules per unit($100_{\mu}m^2$) on tetracycline HCI group was more than that in the laser group below 1.5W of power(150mJ/pulse) and was significantly less than that in laser group above 2W of power(200mJ/pulse)(P<0.OOl). As power increased the intrapulpal temperature rise also increased. The result suggested that the parameter which effectively remove root surface smear layer than tetracycline HCI may cause thermal damage to pulp and root surface alteration result from laser exposure would indicate need for additional instrumentation. Thus, Nd:YAG laser irradiation in these parameter may not be appropriate for clinical use as adjunct to conventional periodontal therapy.

• Journal of Periodontal and Implant Science
• /
• 제26권1호
• /
• pp.230-243
• /
• 1996

Root surface exposure due to gingival recession after periodontal surgery, dentin exposure after root planing elicit pain response when exposed to mechanical, heat, chemical or osmotic stimulation. Especially, patients treated with periodontal surgery, show high frequency and there have been reports showing the 1 out of 7 patients have dentin hypersensitivity. There have been many studies on the clinical effects of various materials on the treatment of dentin hypersensitivity. but, none could provide absolute clinical efficacy. In this study, 45 teeth from 30 patients, who had had periodontal surgery and showed dentin hypersensitivity after surgery were chosen for the experimental group and they were illuminated with laser, 15teeth were chosen for the control group and they were not exposed to laser. After this dentin hypersensitivity was elicited by tactile, compressed air, cold water and then, the degree was evaluated using NRS(Numerical Rating Scale). And during LLLT(Low Level Laser Therapy) semiconductor laser using Gallium - Arsenide as a diode was illuminated for 180 seconds at a frequency of 7(500Hz). This therapy was done 10 times, and each time the changes in dentin hypersensitivity was evaluated using NRS. The results were as follows : 1. After treat with LLLT on dentin hypersensitivity due to periodontal surgery, 22.2% showed total loss of dentin hypersensitivity, 60.0% showed loss of tactile dentin hypersensitivity, 48.8% showed loss of compressed air dentin hypersensitivity, 22.2% showed loss of cold water dentin hypersensitivity. 2. As a result of clinical evaluation of dentin hypersensitivity using NRS, there was significant increase in improvement of dentin hypersensitivity in the experimental group compare to the control group(P<0.05). And there was almost no natural loss of dentin hypersensitivity in the control group. 3. In comparison of the stages of evaluation, there was significant difference in between experimental and control group. after the second visit(P<0.05), and the difference increased with each visit.

• Journal of Ginseng Research
• /
• 제36권2호
• /
• pp.198-204
• /
• 2012

An light-emitting diode (LED)-based light source was used as a monochromatic light source to determine the responses of raw ginseng roots (Panax ginseng Meyer) to specific emission spectra with respect to the production of ginsenosides. The ginsenoside content in the ginseng roots changed in response to the LED light treatments at $25^{\circ}C$ relative to the levels in the control roots that were treated in the dark or at $4^{\circ}C$ for 7 d. Ginseng roots were exposed to LEDs with four different peak emission wavelengths, 380, 450, 470, and 660 nm, in closed compartments. Compared with the control $4^{\circ}C$-treated roots, roots that were treated with 450 and 470 nm light showed a significantly increased production of ginsenosides (p<0.05), with increases of 64.9% and 74.1%, respectively. The contents of the ginsenosides $Rb_2$, Rc, and $Rg_1$ were significantly higher (p<0.05) in the 450 and 470 nm-treated root samples. The ratio of protopanaxadiol ginsenosides ($Rb_1$, $Rb_2$, Rc, and Rd) to protopanaxatriol ginsenosides ($Rb_1$, $Rb_2$, Re, and Rf) was significantly higher (p<0.05) in the 450 and 470 nm-treated root samples than in the control $4^{\circ}C$-treated roots. This is the first report that demonstrates the increase and conversion of ginsenosides in raw ginseng roots in response to exposure to LED light.

• 치과방사선
• /
• 제28권2호
• /
• pp.471-489
• /
• 1998

For the successful endodontic treatment, root canal should be cleaned thoroughly by accurate mechanical and chemical canal preparation and sealed completely with canal filling material without damaging the periapical tissues. The accuracy of the root canal length measurement is a prerequisite for the success of the endodontic treatment, and the root canal length is often determined by the standard periapical radiographs and digital tactile sense. In this study, the accuracy and the clinical usefulness of Digora/sup (R)/, an intraoral digital imaging processor and the conventional standard radiographs were compared by measuring the length from the top of the file to the root apex. 30 single rooted premolars were invested in a uniformly sized blocks and No.25 K-file was inserted into and fixed in each canal. Each block was placed in equal distance and position to satisfy the principle of the bisecting angle and paralleling techniques and Digora/sup (R)/ system's image and standard periapical radiographs were taken. Each radiograph was examined by 3 different observers by measuring the length from top of the file to the root apex and each data was compared and analyzed. The results were as follows; 1. In the bisecting angle technique, the average difference between the Digora/sup (R)/ system and standard periapical radiograph was 0.002 mm and the standard deviation was 0.341 mm which showed no statistically significant difference between the two systems(p>0.05). Also, in the paralleling technique, the average difference between these two system was 0.007 mm and the standard deviation was 0.323 mm which showed no statistically significant difference between the two systems(p>0.05). 2. In Digora/sup (R)/ system, the average difference between the bisecting angle and paralleling technique was -0.336 mm and the standard deviation was 0.472 mm which showed a statistically significant difference between the two techniques(p<0.05). Also, in the standard periapical radiographs, the average difference between the bisecting angle and paralleling technique was 0.328 mm and the standard deviation was 0.517 mm which showed a statistically significant difference between these two techniques(p<0.05). 3. In Digora/sup (R)/ system and the standard periapical radiographs. there was a statistically significant difference between the measurement using the bisecting angle technique and the actual length(p<0.05), But there was no statistically significant difference between the measurement using the paralleling technique and the actuallength(p>0.05). In conclusion. the determination of the root canal length by using the Digora/sup (R)/ system can give us as good an image as the standard periapical radiograph and using the paralleling technique instead of the bisecting angle technique can give a measurement closer to the actual canal length. thereby contributing to a successful result. Also. considering the advantages of the digital imaging processor such as decreasing the amount of exposure to the patient. immediate use of the image. magnification of image size. control of the contrast and brightness and the ability of storing the image can give us good reason to replace the standard periapical radiographs.

• 대한소아치과학회지
• /
• 제27권2호
• /
• pp.344-350
• /
• 2000

외상으로 인하여 치아가 받는 여러 가지 손상형태 중 치관-치근파절이 나타나는 빈도는 영구치에서 5%, 유치열에서는 2%라고 알려져 왔다. 치조정 하방에 파절선이 존재하고 치수노출을 동반한 치관-치근 파절에서는 크게 두가지의 보존적인 치료방법이 있다. 첫째, 교정력에 의해 정출시키는 방법과 둘째 치조와내에서 교합면 방향으로 재위치시키는 Intra-alveolar transplantation 등이 있다. 외과적 정출법은 1970년대에 소개된 이래로 교정적 정출법의 대안으로 많이 시행되고 있으며 높은 성공률을 가진 술식으로 여겨지고 있다. 본 증례는 외상으로 인해 상악 우측 중철치의 치수노출을 동반한 치관-치근 파절이 발생한 경우로 외과적 정출을 시행하기로 하였으나, 치근단 파절편의 길이가 짧아서 치아를 발거 후 회전시켜 재식하는 방법만으로는 파절선을 치조정 상방으로 위치시킬 수가 없었다. 따라서 치아를 발거한 후 파절편의 지지를 위해 치조와의 치근단부에 탈회냉동건조골을 이식한 후에 치근단 파절편을 노출한 후 suture splint를 시행하였다. 1년 3개월간의 관찰결과, 치조백선이 회복되고 정상적인 동요도를 보였으며, 염증성, 대체성 치근흡수 등과 같은 합병증은 발생되지 않았다.

• 한국식품영양과학회지
• /
• 제41권6호
• /
• pp.834-839
• /
• 2012

민들레 뿌리분말의 첨가비율(0, 5, 10, 15%)을 달리하여 제조한 민들레 약주의 이화학적 및 관능적 특성을 조사하였다. 민들레 뿌리분말 첨가량의 증가에 따른 pH 변화는 미미하였고, 산도와 당도는 15% 첨가구가 각각 가장 높은 함량을 나타났다. 환원당 함량은 민들레 뿌리분말 15% 첨가구가 발효 3일째에 다른 시료구에 비하여 가장 높았으며, 그 이후에는 급격하게 감소하여 다른 시험구와 비슷한 함량을 나타내었고, 알코올 함량은 발효가 진행됨에 따라 시험구 모두 증가하였다. 민들레 뿌리분말 첨가 비율을 달리하여 제조한 약주의 관능적 특성은 첨가 비율이 10, 15%로 증가할수록 종합적 기호도가 좋지 않았으며, 첨가 비율이 5%인 시험구가 색, 향, 맛, 목넘김, 종합적 기호도가 우수하였다. 이와같이 민들레 뿌리분말의 첨가 비율을 달리하여 제조한 약주의 이화학적 및 관능적 특성을 검토한 결과, 민들레 뿌리분말 5%를 첨가하여 제조한 약주가 가장 우수한 것으로 나타났다. 위의 실험 결과, 민들레 뿌리분말로 약주를 제조할 경우, 민들레 뿌리분말 5%를 첨가하는 것이 가장 적합함을 알 수 있었다.

• Safety and Health at Work
• /
• 제6권4호
• /
• pp.268-278
• /
• 2015

Background: This study aimed to assess the whole-body vibration (WBV) exposure among large blast hole drill machine operators with regard to the International Organization for Standardization (ISO) recommended threshold values and its association with machine- and rock-related factors and workers' individual characteristics. Methods: The study population included 28 drill machine operators who had worked in four opencast iron ore mines in eastern India. The study protocol comprised the following: measurements of WBV exposure [frequency weighted root mean square (RMS) acceleration ($m/s^2$)], machine-related data (manufacturer of machine, age of machine, seat height, thickness, and rest height) collected from mine management offices, measurements of rock hardness, uniaxial compressive strength and density, and workers' characteristics via face-to-face interviews. Results: More than 90% of the operators were exposed to a higher level WBV than the ISO upper limit and only 3.6% between the lower and upper limits, mainly in the vertical axis. Bivariate correlations revealed that potential predictors of total WBV exposure were: machine manufacturer (r = 0.453, p = 0.015), age of drill (r = 0.533, p = 0.003), and hardness of rock (r = 0.561, p = 0.002). The stepwise multiple regression model revealed that the potential predictors are age of operator (regression coefficient ${\beta}=-0.052$, standard error SE = 0.023), manufacturer (${\beta}=1.093$, SE = 0.227), rock hardness (${\beta}=0.045$, SE = 0.018), uniaxial compressive strength (${\beta}=0.027$, SE = 0.009), and density (${\beta}=-1.135$, SE = 0.235). Conclusion: Prevention should include using appropriate machines to handle rock hardness, rock uniaxial compressive strength and density, and seat improvement using ergonomic approaches such as including a suspension system.