• Title/Summary/Keyword: Root density

Search Result 720, Processing Time 0.026 seconds

The Density Effect on the Dry Matter Production of Zea mays (옥수수의 건물질성산에 미치는 밀도효과)

  • 이일구
    • Journal of Plant Biology
    • /
    • v.13 no.1
    • /
    • pp.56-64
    • /
    • 1970
  • The present experiments differning from that conducted by agriculturists with the first consideration of food or seed production were performed in order to investigate the density effect on dry matter production in the artified population of maize. Three experimental plots were established and one seed was sown in the first plot, 2 seeds in the second plot and 3 seeds in the third plot, respectively. The space of each ridge was designed with 30cm in width and 50cm in length. The space of each seed was 4cm and the growth amount by density was measured through three times. The results obtained are as follows: 1) The total growth amount per unit area was in the order of the third, second and first plots until the second sampling. At the third sampling the whole plots showed almost the same growth amount except the first plot which showed a slightly smaller amount. 2) The growth amount per individual plant was in the order of the third, second and first plots until the second sampling, while the first plot showed drastic growth compared with the other two plots at the third sampling. 3) The growth amount by each organ(leaf, stem and root) of the plant body was markedly abundant in the stem of the non-productive part compared with that in the leaf of the productive part. Especially the root was affected remarkably by density and the first plot showed an abundant growth in comparison with the other plots which were too poor to resist the gound surface.

  • PDF

A Research on None Covering of Top-soil for Rice Seedling Nursery for Sparse Machine Transplanted Rice (벼 소식재배를 위한 무복토 육묘 연구)

  • Park, K.H.;Ryu, H.Y.
    • Journal of Practical Agriculture & Fisheries Research
    • /
    • v.21 no.2
    • /
    • pp.77-86
    • /
    • 2019
  • To determine none top soil covering in rice seedling nursery method for the sparse machine transplanting, four different sowing methods were tested. Shoot and root length, fresh weight, leaf number and color using leaf color chart(LCC) and SPAD were collected as the data comparison of methods. The seedling height showed the highest growth according to the conventional (230g seed rate of pre-emerged seeds and top-soil covering) > high sowing density 1 (290g seed rate of pre-emerged seeds and top-soil covering) ≥ high sowing density 2(290g seed rate of pre-emerged seeds and none top-soil covering) > high sowing density 3(290g seed rate of iron-coated seeds and none top-soil covering). There was any statistical difference between groups in root length, leaf number, LCC, and SPAD values. Thus, a high sowing density of 290g for rice nursery seedling box was recommended to the sparse machine transplanting in rice cultivation with the none top-soil covering method, enabling convenient handling in transportation and machine transplanting work.

Effects of Aphelenchus avenae on Suppression of Soilborne Diseases of Ginseng (Aphelenchus avenae에 의한 인산 토양병의 억제효과)

  • 김영호
    • Korean Journal Plant Pathology
    • /
    • v.10 no.4
    • /
    • pp.319-324
    • /
    • 1994
  • The monoxenic culture of the fungivorous nematode, Aphelenchus avenae, was applied for the control of soil-borne ginseng pathogens such as Fusarium solani and Rhizoctonia solani. Fungivorous nematode populations were measured in a field to examine relationships between the nematode populations and suppression of ginseng root diseases. Inoculation of A. avenae (5000 nematodes per petri-dish) reduced the colonization of the Fusarium mycelium on root discs of ginseng and carrot by 80.0% and 60.5%, respectively. A. avenae also significantly reduced the occurrence of damping-off of ginseng by R. solani pathogenic to ginseng, and no plant damage by the nematode was noted. In a 3-year-old ginseng field infested with Cylindrocarpon destructans, plant missing caused by root rot positively correlated to the density of potato rot nematode, Ditylenchus destructor, but it was reduced with the population of A. avenae, suggesting that A. avenae might inhibit the occurrence of ginseng root rot.

  • PDF

The Prediction of Landslide Hazard Areas Considering of Root Cohesion and Crown Density (뿌리점착력과 수관밀도를 적용한 토사재해 위험지역 예측)

  • Choi, Won-Il;Choi, Eun-Hwa;Suh, Jin-Won;Jeon, Seong-Kon
    • Journal of the Korean GEO-environmental Society
    • /
    • v.17 no.6
    • /
    • pp.13-21
    • /
    • 2016
  • Since the landslide hazard areas prediction was analyzed by slope-angle and soil properties, regional characteristics is not taken. Therefore, in order to make more rational prediction, it is necessary to consider the characteristics of the region. Tree roots have been known to increase soil cohesion in landslide hazard areas and to vary the degrees depending on the tree type. In addition, a reasonable prediction of landslide hazard areas can be made by considering crown density based on crown distribution patterns of the area of interest. In this study, using the roots cohesion considering the crown density of the trees, which is in the landslides risk areas around Mt. Gwehwa in Sejong City, the landslides risk areas were predicted and compared with predicted results obtained by not considering root cohesion.

Ultrastructural Study on Differentiation of Plastid in Panax ginseng Root Tip (인삼(Panax ginseng) 근단의 색소본 분화에 관한 미세구조적 연구)

  • Jeong, Byung-Kap;Kim, Woo-Kap
    • Journal of Ginseng Research
    • /
    • v.16 no.1
    • /
    • pp.31-36
    • /
    • 1992
  • The ultrastructural changes and differentiation mechanism of chromoplasts and leucoplasts from Proplastids in root tip cells of Panax ginseng seedlings were studied with transmission electron microscope. Initial cells have so many proplastids with a few osmiophilic droplets and a lot of mitochon dria at early stage of germination, therefore electron density of cytoplasm is generally higher than that of the other cells just like periblem, plerome and root cap. Proplastids are observed in the initial cells, but only leucoplasts appeared in the central root cap cells. Because root cap cells are derived ultimately from initial cells, the cell organelles in the root cap cells are directly related by those of initial cells. This result postulates that leucoplast is diferentiated from proplastid, and this is the same with other's concepts. On the contrary, the precise observations of chromoplast with crystalline inclusions in the peripheral root cap cells can conclude the direct pathway of chromoplast development from proplastid. Because of the differences of these result from those of other experiments, new scheme of plastid development, direct differentiation of chromoplast from proplastid, can be postulated. And this is the originality of this research on the differentiation of plastids.

  • PDF

Observation of Root-knot Nematodes in the Root Gall Formed on Oriental Melon

  • Kim, Dong-Geun;Kim, Seung-Han;Lee, Joong-Hwan
    • The Plant Pathology Journal
    • /
    • v.21 no.1
    • /
    • pp.73-76
    • /
    • 2005
  • Oriental melon, Cucumis melo L. cv. Geumssaragieuncheon, grafted on Shintozoa (Cucurbit maxima ${\times}$ Cu. moschata) was planted in a greenhouse infested with Meloidogyne arenaria and root galls were examined five months after planting. A gram of root gall was volumed at ca. 10 cm3 and contained in an average of 363 females (170 developing and 193 matured females), 2,120 secondstage juveniles (J2), and 13,074 eggs. In addition, there was 56 J2 per $cm^3$ soil around the infested plant. An oriental melon had an average of 134.6 g of root gall (70% of total root weight) per 0.72 $m^2$ area. In a conservative estimation, an oriental melon plant could accommodate ca. 1.2 ${\times}$ $10^7$ eggs and J2 per 0.72 $m^2$. The eggs contained in root tissues could be an important inoculum source to the next crop and the fate of these eggs are well worth further investigation.

Effect of Growth Environment on the Root Development of Pasture Species I. Development of hydroponic technique for studies on the root charateristics (생육환경이 주요 목초의 뿌리발육에 미치는 영향 I. 뿌리의 특성 연구를 위한 수경재배법의 개발)

  • Sam Nam Hur;David. Scott
    • Journal of The Korean Society of Grassland and Forage Science
    • /
    • v.17 no.4
    • /
    • pp.345-350
    • /
    • 1997
  • Using modified Lincoln solution, hydroponic system was developed to compare simultaneously a range of pasture species in terms of relative growth rate(RGR), rate of roots to shoots, and relative root volume and root area. Modified Lincoln solution achieved optimum growth of nineteen forage species tested, and was proved to be a good method for studying plant root characteristics. RGR was measured sucesshlly showing reasonably consistant values over time. There was a much differences in rootkhoot ratio between species within groups as between groups. Root tissue density was lower in grasses than legume or herb group. Root area index was very high for grasses and herbs, and this index should be useful for evaluating the comparative root system of different species.

  • PDF

Spot Heating Technology Development for Strawberry Cultivated in a Greenhouse by Using Hot Water Pipe (온수배관을 이용한 시설딸기 부분난방기술 개발)

  • Moon, Jongpil;Kang, Geum-Choon;Kwon, Jin-Kyung;Paek, Yee;Lee, Tae Seok;Oh, Sung-Sik;Nam, Myeong-Hyeon
    • Journal of The Korean Society of Agricultural Engineers
    • /
    • v.58 no.5
    • /
    • pp.71-79
    • /
    • 2016
  • The effects of spot heating for growing the strawberry cultivated in a plastic greenhouse during the winter that were estimated in Nonsan strawberry experiment station located in Chungnam. The temperature of water for heating was controlled by a electric hot water boiler and kept at the range of $22{\sim}24^{\circ}C$. Heating pipes were set up in root zone for root zone heating and very close to crown for crown heating. Spot heating effects were estimated by applying spot heating system in three test factors of heating root zone, crown only and crown plus root zone. The material for crown heating pipe was white low density polyethylene and the nominal diameter of that pipe was 16 mm. The material for root zone heating pipe was flexible stainless steel and the nominal diameter of that pipe was 15A. The flow rate of heating water circulation was 480 L/h and water circulation lasted for all day long. Temperatures, harvest yield by test beds were surveyed from Nov. 10, 2013 to Apr. 29, 2014. The temperature of crown spot for crown heating bed was at the range of $13.0{\sim}17.0^{\circ}C$ during the night and that of crown spot in control bed was at the range of $8.0{\sim}14.0^{\circ}C$. Also, the temperature of root zone for root zone heating bed was at the range of $18{\sim}21.0^{\circ}C$ and that of root zone in control bed was at the range of $13.0{\sim}15.0^{\circ}C$. The cumulative yield growth rate in earlier harvest period (from Dec. 20 to Mar. 15) of crown heating bed was 43% compared with that of control bed and the cumulative yield of crown plus root zone heating bed was 39 % and that of root zone heating bed was 39 %.

Exploration of Optimum Container for Production of Larix leptolepsis Container Seedlings (낙엽송의 용기묘 생산을 위한 적정 용기 탐색)

  • Kim, Jong-Jin;Lee, Kyung-Jae;Song, Ki-Sun;Cha, Young-Geun;Chung, Young-Suk;Lee, Jong-Hwa;Yoon, Taek-Seong
    • Journal of Korean Society of Forest Science
    • /
    • v.99 no.4
    • /
    • pp.638-644
    • /
    • 2010
  • This study was carried out to establish the informations on the optimum container for production of Larix leptolepsis container seedlings. Height growth of 1-year-old container seedling was highest in 250 mL of container (19.3 cm), and of 2-year-old seedling was in 500 mL (56.9 cm). On the other hand, the highest growth of root-collar diameter was observed in the both 1-year-old and 2-year-old seedlings grown in 500 mL. Dry mass production in both a whole seedling and each organs of 2-year-old seedling was significantly high in the container with larger volume and lower seedling density. According to the analysis using by WinRhizo program, the larger container in volume showed better root morphological traits such as total root length, root projected area, root surface area, root volume and average root diameter. Among the elements for analysis of root morphological traits, the root volume was the highest one affected by container volume. And it was observed that the root volume was 79.5% and 46.8% in 320 mL and 250 mL, respectively, compared to 500 mL.

Influence of Nitrogen Application Rate on Growth and Dry Matter Yield of Achyranthes japonica Nakai (질소시비량이 쇠무릎의 생육 및 건물수량에 미치는 영향)

  • Kang, Young-Kil
    • Korean Journal of Medicinal Crop Science
    • /
    • v.11 no.2
    • /
    • pp.109-114
    • /
    • 2003
  • To determine the optimum N rate m Jeju island for utricle and root production of Achyranthes japonica Nakai, a medicinal plant, the plants were grown at two plant densities $(50\;and\;100\;hills/m^2$, two plants per hill; mall plots) at six N application rates (0, 6, 12, 18, 24, and 30 kg/10a; split plots) in 2001. There was no significant interaction between plant density and N application rate for all measured agronomic characters. Main root length and roots per hill were 5 and 52% greater, respectively, but N content of stover was lower under lower plant density compared to higher plant density. The other characters were not affected by plant density. N application rate did not significantly affect mall stem diameter, spikes per hill, spike length, utricles per spike, mall root length and diameter, and utricle N content. As N rate increased from 0 to 30 kg/10a, SPAD values and stover N content increased linearly from 35.0 to 40.5 and 1.09 to 1.38%, respectively, and plant height, branches per hill, stover, utricle and root dry matter yields, roots per hill, and top N yield increased quadratically. Spikes per hill were increased in a cubic manner with increased N application rates. N application rate for the maximum dry matter yield of utricle and root in A. japonica was estimated to be 21 kg N/10a.