• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.848-854
• /
• 2009

Of the rapid development of modem civilization development is one of the IT industry. The Network is the root of the discrete industry. Most of the Protocol is used by LAN and the TCP / IP. Slowly in the railway operation of this Network is being applied. It also used to train and they are operated. The concept of the road, the Network TCP / IP using a non-Star structure of the Main Unit and the Bus Network is designed to structure consists of the Network. This structure is a simplified DATA. Data of complex operations is easy to feel the speed limit is. In addition, all devices must be independent to the operating system with the ability to manage the operation and stability in terms of exactly how the transmission of Data is gonna work pass. And transmission occurs in the middle of the Noise and the device is available to manage the power. Noise in the power of the railway to ensure the efficient transfer of Data is by blocking. Also, by presenting the entire system's operational safety should be guaranteed the safety of the railway.

• Korean Journal of Remote Sensing
• /
• v.29 no.4
• /
• pp.361-373
• /
• 2013

The monitoring of urban area, target detection and building reconstruction have been actively studied and investigated since high resolution X-band SAR images could be acquired by airborne and/or satellite SAR systems. This paper describes an efficient approach to reconstruct artificial structures (e.g. apartment, building and house) in urban area using high resolution X-band SAR images. Building footprint was first extracted from 1:25,000 digital topographic map and then a corner line of building was detected by an automatic detecting algorithm. With SAR amplitude images, an initial building height was calculated by the length of layover estimated using KS-test (Kolmogorov-Smirnov test) from the corner line. The interferometric SAR phases were simulated depending on SAR geometry and changable building heights ranging from -10 m to +10 m of the initial building height. With an interferogram from real SAR data set, the simulation results were compared using the method of the phase consistency. One of results can be finally defined as the reconstructed building height. The developed algorithm was applied to repeat-pass TerraSAR-X spotlight mode data set over an apartment complex in Daejeon city, Korea. The final building heights were validated against reference heights extracted from LiDAR DSM, with an RMSE (Root Mean Square Error) of about 1~2m.

• Journal of the Korean Society of Costume
• /
• v.29
• /
• pp.171-182
• /
• 1996

This thesis is concerned with the study of the court attire the typical attire of the ju-dicial world in a point of time that more than 100 years have passed since the introduction of the modern judical system. In recognition of the fact that compiled data of the official uni-form or attire in Korea are insufficient this study placed its signification on the provision of information with focus on attire. As a result of studying court attire in Korea the conclusion was made as follows: Firstly Official attires in Yi Dynasty were divided by wearing embroidered insignia on the breast and the back of an official robe ac-cordint to court rank as well as by wearing Sa-mo in wadded clothes of Dan-ryeong and attaching all sorts of appurtenances including bands and shoes The Minister of Justice was equipped with Ho-pyo Dae-sa-heon equipped with Hae-chi the mayor of Seoul equipped with Un-an In the era of the Kng Young-jo the minister of Justice had no change in its of-ficial robe but the mayer(Pan-yun) of Seoul (Han-sung-bu) had Un-an(wild geese in clouds) changed into Un-hak In the King Ko-jog era the minister of Justice had Ho-pyo changed into Ssang-ho and the mayor of Seoul had Un-hak changed into Ssng-hak on embroideved insignia on the breast and back of an official robe. Laws and regulations concerning court attire began with the In-judgement Full-dress Uni-form Requlation for official-level Clerical Staff below the ordinary staff the Issue No. 14 of the Royal Ordinance in 1906 provided as $\ulcorner$the matter cincerning the Dress Regulation of the Tribunal staff of the Cho-sun Government-General$\lrcorner$the Issue No. 222 of the Royal Ordi-nance in 1911 and changed into$\ulcorner$the Regu-lation on the Dress of Judge Prosecutor At-torney and Law Count Clerk$\lrcorner$the Issue No. 12 of the Supreme Court Rule in 1953 affter the establishment of Korean Government since emancipation from the Japanese rule and into $\ulcorner$the Regulation concerning the Court Attire of Judge and law Court Clerical Staff$\lrcorner$the Issue No. 516 of the Supreme Court Rule in 1966. The judicial system in Korea is the system introduced from the foreign country rather than autogenously developed. And it came to pass through the Japanese colonial period it the beginning that it took root in Korea n was not stabilized in harmony with our native tradition. Accordingly the attare regulation in the judicial system took root in our society by accepting the Japanese attire regulation as it was and judical officials have come to wear the count attire similar to that of the Japanese imperialist era due to its influence though Korean independent goverment was established together with liberation form the Japanese rule. The more regrettable thing is that the current court attire has maintained the form greatly influenced by the U. S. court attire. Fortunately as the judicial circles have recently raised their voices for change in the court attire it has been told that the forma-tion of a meeting for a new court attire has been under way. The birth of the court attire into Which our tradition is sublimated is expected. This study end up with thinking that the must Korean thing is the most global thing in this era that people in the world are clamoring for globalization.

• Journal of Welding and Joining
• /
• v.32 no.4
• /
• pp.26-33
• /
• 2014

The metallurgical and mechanical characteristics, toughness and corrosion resistance of dissimilar welds between super duplex stainless steel UNS S32750 and carbon steel ASTM A516Gr.70 have been evaluated. Three heat inputs of 21.12, 24.00, 26.88kJ/cm were employed to make joints of dissimilar metals with flux cored arc welding(FCAW). Based on microstructural examination, vermicular ferrite was formed in the first layer of weld at low heat input(21.12kJ/cm) and $Cr_{eq}/Ni_{eq}$ of 1.61 while acicular ferrite was formed in last layer of weld at high heat input(26.88kJ/cm) and $Cr_{eq}/Ni_{eq}$ of 1.72. Ferrite percentage in dissimilar welds was lowest in the first layer of weld regardless of heat inputs and it gradually increased in the second and third layers of weld. Heat affected zone showed higher hardness than the weld metal although reheated zone showed lower hardness than weld metal due to the formation of secondary austenite. Tensile strengths of dissimilar welds increased with heat input and there was 100MPa difference. The corrosion test by ferric chloride solution showed that carbon steel had poor corrosion resistance and pitting corrosion occurred in the first layer(root pass) of weld due to the presence of reheated zone where secondary austenite was formed. The salt spray test of carbon steel showed that the surface only corroded but the amount of weight loss was extremely low.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.05
• /
• pp.123-126
• /
• 1997

We present a method for the estimation of 3D solid angle assessment of the acetabular coverage of the femoral head in 3D space. At first, femoral head and acetabulum is segmented from the original CT scan images. The slice thickness is 1.5mm and the number of slices is usually 30-40 to cover the entire acetabulum. The superior half of the femoral head is modeled as part of a sphere. Thus, the axial cross sections of the upper half of the femoral head are also modeled as circles. A set of points from each outline image of femoral head is fitted recursively into a circle by minimizing root-mean-square (RMS) error. With these fitted circles, a center point of the femoral head model is evaluated. This is a reference point for calculating the solid angle of the acetabular inner surface. Next, the tangent lines connecting from a set of points of the acetabular edge to the center of the fitted sphere are obtained. The lines pass through the unit sphere whose center is the same as that of the femoral head. With the points on the unit sphere, we calculate area and estimate the solid angle. Based on this solid angle, the deformity of the acetabulum is analyzed. In case of normal subject, the solid angle is about 4.3 (rad) and acetabular coverage is 68%.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2011.06a
• /
• pp.76-76
• /
• 2011

선박이나 산업 플랜트에서 파이프 또는 탱크류의 맞대기 용접 시 안정적인 이면비드의 형성은 매우 중요하다. 대부분의 현장에서 파이프 맞대기 초층용접부의 안정적인 이면비드를 형성하기 위해 3mm의 루트갭을 띄우고 루트면이 없는 V-그루브에서 필러를 사용하는 수동 TIG용접을 주로 사용하고 있다. 수동 TIG용접은 고품질의 비드와 우수한 아크안정성, 그리고 용접인자의 제어가 쉽다는 장점이 있다. 그러나 수동 TIG용접은 용접속도가 10cpm정도로 느리기 때문에 GMAW에 비해 생산성이 낮고 작업자의 숙련도에 따라 품질이 변하게 된다. 본 연구에서는 높은 생산성과 기준갭 1.5mm에서 단차의 허용공차를 크게 하기 위해 루트면 3mm를 가지는 U-그루브의 설계를 하였으며, 두꺼운 루트면을 가지는 그루브에서 안정적인 이면비드를 형성시키기 위해 GMAW에서 아크 충격량에 대한 검토를 실시하였다. GMAW의 아크력이 용입에 어떠한 영향을 미치는지 검토하기 위해 수냉되는 동판에 갭을 1.5mm 띄우고 동일한 용착량과 입열량에서 아크력만을 변화시켜 실험하였다. 또한, U-그루브의 루트부를 모델링하여 두께3t의 평판시편을 각각의 갭과 단차 조건에서 실험하였다. 이 때, 기준갭 1.5mm에서 갭에 의해 생기는 단면적을 기준 갭단면적, 갭이 증가함에 따라 증가되는 단면적을 추가 갭단면적, 갭이 감소함에 따라 감소하는 단면적을 감소 갭단면적으로 정의하였다. 용접 중 발생하는 추가, 감소 갭단면적에 대하여 용착량을 50%의 수준으로 증가, 감소 시켰다. 갭에 따라 아크력을 변경하여 실험을 실시하였고 이면비드의 형상을 확인 하였다. 마지막으로 평판 시편의 조건에서 안정적으로 이면비드가 형성된 조건을 pipe U-그루브에 적용하였다. 그 결과 동판에서 용착량과 입열량이 같음에도 불구하고 아크력이 증가함에 따라 용입이 깊어짐을 확인하였다. 또한. 3t 평판시편에서 아크력의 제어를 통해 큰 단차와 갭이 있을 때, 안정적인 이면비드를 얻을 수 있는 조건을 확립하였다. 마지막으로 pipe U-그루브에서 앞선 실험의 용접조건으로 갭과 단차의 변화에 대해 실험을 하였으나, 시험편의 두께차이에 의한 전도 열손실로 인해 이면비드의 형성이 어려웠고, 아크 충격량의 증가를 통해 이러한 문제를 해결하였다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.7 no.2 s.14
• /
• pp.47-56
• /
• 1999

In this study, tie point observation in aerial triangulation was automated by the image processing methods. The technique includes boundary extraction and We matching processes. The procedures were applied to extract points of Interest and to find their conjugate points in the other images. The image coordinates of the identified points were then used to compute their absolute coordinates. An algorithm was developed in this study for the automation of observation in aerial triangulation, which is a manual process of selecting a tie point and recording the image coordinate of the selected point. The developed algorithm automates this process through the application of a mathematical operator to extract points of interest from an arbitrary image. The root m square error of image coordinates of the developed algorithm is $6.8{\mu}m$, which is close to that of the present analytical method. In a manual environment, the accuracy of the result of a photogrammetric process is heavily dependant on the level of skill and experience of the human operator. No such problem exists in an automated system. Also, as a result of the automated system, the time spent in the observation process could be reduced by a factor of 61.2%, thereby reducing the overall cost.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.26-26
• /
• 2009

TIG 용접은 고품질이고 용접인자의 제어가 쉽고 정확하다는 장점이 있지만, 얕은 용입과 낮은 생산성과 같은 단점이 있다. TIG 오비탈 용접에서는 용입의 한계 때문에 작은 루트면과 넓은 그루브를 가공하여 다층 용접을 하며, 루트패스에서는 파이프 진원도에 의한 핏업 시 단차의 문제가 자주 발생하여 많은 현장에서 루트갭을 만들어 수동 용접하는 실정이다. 따라서 생산성이 낮으며 생산 단가가 높고 용접 품질이 작업자에 따라 다르게 된다. 이러한 문제점을 해결하여 자동 오비탈 용접을 위해 단차를 흡수 할 수 있는 용접 공정 개발이 필요하다. 본 연구의 목적은 TIG 용접에서 단차에 따른 용접성을 검토하여 이를 맞대기 용접에 적용했을 때 균일한 이면비드를 얻는 공정을 개발하는 것이다. 따라서 본 연구는 아래보기 자세에서 단차에 따른 용입 특성을 이면비드 및 단면으로 비교 분석하였다. 단차 없이 아크길이만 1mm, 2mm, 3mm로 변경하여 실험한 결과 아크길이가 짧아질수록 표면비드 폭은 좁아졌고 이면비드 폭은 증가하는 경향을 나타내어 아크길이가 짧아질수록 용융효율이 증가하는 것을 확인하였다. 단차 1mm에서 아크길이 3mm를 제외하고 표면비드 및 이면비드가 미려하였다. 하지만 단차 2mm에서는 아크길이 1mm, 2mm, 3mm 전부 이면비드가 생성되지 않았다. 이는 단차로 인해 아크길이가 증가하여 용융효율이 낮아졌기 때문이라 판단된다. 이면비드가 생성되지 못한 시험편을 백 베벨링(0.5mm, 1.0mm, 1.5mm, 2.0mm)하여 실험한 결과 단차 2mm, 아크길이 1-3mm 백 베벨링 2.0mm 적용한 시험편에서 양호한 이면비드를 얻을 수 있었다.

• Korean Journal of Remote Sensing
• /
• v.14 no.2
• /
• pp.149-164
• /
• 1998

The main object of this study was to prove the effectiveness of different merging methods by using the high resolution IRS(Indian Remote Sensing Satellite)-1C panchromatic data and the multispectral Landsat TM data. The five methods used to merging the information contents of each of the satellite data were the intensity-hue-saturation(IHS), principal component analysis(PCA), high pass filter(HPF), ratio enhancement method and look-up-table(LUT) procedures. Two measures are used to evaluate the merging method. These measures include visual inspection and comparisons of the mean, standard deviation and root mean square error between merged image and original image data values of each band. The ratio enhancement method was well preserved the spectral characteristics of the data. From visual inspection, PCA method provide the best result, HPF next, ratio enhancement, IHS and LUT method the worst for the preservation of spatial resolution.

• Proceedings of the Ginseng society Conference
• /
• 2002.10a
• /
• pp.456-466
• /
• 2002

Wild ginseng production is increasing due to forest recovery for last 30 years. Total number of Symmani (traditional mountain ginseng digger) was 558 in 2001. Provincial distribution of Symmani in 2001 was highest in Kangwon $(32\%),$ next in Choongbook $(21\%)$ and least in Jeonnam $(0.7\%)$ and Kyoungnam $(0.9\%).$ Age distribution of Symmani was $33\%\;for\;fourties,\;32\%$ for fifties and $20\%$ for sixties. There were 8 persons in eighties. Symmanies are still keeping traditional ritual for mountain god serving clothes of colored ribbons and foods. Increased production induced open market system from underground dealing of mountain ginseng. Korea Mountain Ginseng Association established mountain ginseng assessment committee with professional Symmanies in 2001. From September to November in 2001, 987 roots were requested for quality assessment to the committee and 476 roots $(48\%)$ were passed and graded and others were rejected. Highest frequency of rejection was foreign origin. Pass rate was highest $(74\%)$ in Choongnam suggesting best place for quality. Number of collected roots in each province was positively correlated (p=0.05) with number of Symmanies. There are 3 quality groups of mountain ginseng, Heaven (pure natural), Earth (from seeding of wild ginseng) and Man (from seeding or seedling of wild ginseng with slight environmental modification). The relationship between price and age was polynomial in high quality root, Heaven, Earth and seed long head of Man group, and linear in low quality group, seedling long head of Man. The best one in 2001 was 26 g, 124 years old and sold with 109 million won. Quality criteria are age, shape, weight, color and healthy outlook. Fine roots are criteria for health status of roots and taproot is criteria for efficacy and called as medicine barrel. The implication is that ginsenosides have rarely been experienced for efficacy. The quality criteria of cultivated ginseng were originated from those of mountain ginseng. It is unique for mountain ginseng that only fresh one can be on market. Since quality criteria of mountain ginseng must be based on the efficacy experience it is well expected that present criteria might almost be established at the age of Shinnong Materia Medica.