• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.3
• /
• pp.223-228
• /
• 1982

Experiments were conducted to study the interrelationships between root development of rice plant and water managements at saline paddy field where has been grown rice plant for 3 years, and to compare the root development between two fields, saline and matured. Under the conditions of non interval and two day interval flooding at saline paddy fields, root systems developed well at surface soil, however, root systems developed well and distributed evenly through surface and sub-soil at saline field where underground drainage was performed, and at matured field. Root developments at field flooded with no interval and with two-day interval were poor as compared with those of saline paddy field of underground drainage and matured field. Regardless of water managements and fields, the ratio of stunted crown roots developed after panicle fromation stage was higher than that developed at early or middle growth stage.

• Imaging Science in Dentistry
• /
• v.43 no.3
• /
• pp.191-196
• /
• 2013

Purpose: This study assessed the accuracy of linear and angular measurements on panoramic radiographs taken at different positions in vitro. Materials and Methods: Two acrylic models were fabricated from a cast with normal occlusion. Straight and $75^{\circ}$ mesially and lingually angulated pins were placed, and standardized panoramic radiographs were taken at standard position, at an $8^{\circ}$ downward tilt of the occlusal plane compared to the standard position, at an $8^{\circ}$ upward tilt of the anterior occlusal plane, and at a $10^{\circ}$ downward tilt of the right and left sides of the model. On the radiographs, the length of the pins above (crown) and below (root) the occlusal plane, total pin length, crown-to-root ratio, and angulation of pins relative to the occlusal plane were calculated. The data were subjected to repeated measures ANOVA and LSD multiple comparisons tests. Results: Significant differences were noted between the radiographic measurements and true values in different positions on both models with linear (P<0.001) and those with angulated pins (P<0.005). No statistically significant differences were observed between the angular measurements and baselines of the natural head posture at different positions for the linear and angulated pins. Conclusion: Angular measurements on panoramic radiographs were sufficiently accurate and changes in the position of the occlusal plane equal to or less than $10^{\circ}$ had no significant effect on them. Some variations could exist in the pin positioning (head positioning), and they were tolerable while taking panoramic radiographs. Linear measurements showed the least errors in the standard position and $8^{\circ}$ upward tilt of the anterior part of the occlusal plane compared to other positions.

• Restorative Dentistry and Endodontics
• /
• v.35 no.2
• /
• pp.88-95
• /
• 2010

The purpose of this study was to compare the root canal shaping ability of 4 rotary NiTi instruments in simulated root canals. For the preparation of thirty two curved root canals, Mtwo instruments using "single length"technique, and Profile, ProTaper Universal, and K3 using crown-down technique (N = 8) were used. All canal samples were prepared by reaching an apical canal size of #30. Pre- and post-instrumentation digital images were recorded and an assessment of canal shape was determined using a computer image analysis program SigmaScan Pro (Systat Software Inc., San Jose, CA, USA). The changes of the dimension of inner walls of canals, (2) the changes of the dimension of outer walls of canals, and (3) the centering ratio were measured at 7 measuring points, and then data were statistically analyzed using one-way ANOVA and Duncan's test. The results were as below; 1. The root canal shaping ability of Profile was significantly faster than that of other rotary NiTi instruments (p < 0.05). 2. The deformation and fracture of all instruments used for this study were not experienced. 3. In the degree of changes of the dimension of inner walls of canals, Profile demonstrated the lowest changes of the dimension of inner walls of canals except at the measuring points of the 1 and 2 mm (p < 0.05). However, the ProTaper Universal showed the highest changes of the dimension of inner walls of canals at all measuring points (p < 0.05). 4. In the degree of changes of the dimension of outer walls of canals, Mtwo demonstrated the lowest changse of the dimension of outer walls of canals except at the measuring point of the 1 mm (p < 0.05). However, Profile exhibited the highest changes of the dimension of outer walls of canals at the measuring points of 3 and 4 mm and ProTaper Universal and K3 showed the largest changes of the dimension of outer walls of canals at the measuring points of 1, 2, 6, and 7 mm (p < 0.05). 5. In degree of centering ratio, Profile demonstrated the least centering ratio comparing with the centering ratio shown by other NiTi instruments at the measuring points of 1, 4, 5, and 6 mm. Results suggest that in the coronal part of canal preparation, active cutting files such as ProTaper Universal may efficiently flare the canal orifice and form a better taper, and in the apical part of the canal, files which have a better centering ability such as Profile may maintain the original canal curvature and reduce the shaping time.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.5
• /
• pp.407-410
• /
• 2001

This study was conducted to determine the optimal planting distance in cultivation of yacon (Polymnia sonchifolia Poeppig ＆ Endlicher). Plug seedlings were planted with 6 different plant densities of 80 $\times$ 60, 80 $\times$ 50, 70 $\times$ 50, 70 $\times$ 45, 70 $\times$ 40 and 60 $\times$ 45 cm. The plant height and the petiole length were increased with increasing the planting distance. The tallest plant height of yacon was 165.4cm with the plant density of 80 $\times$ 60 cm. However, branch number per plant, leaf number on main stem and stem diameter were not significantly difference among planting densities. Tuberous root was harvested 31.42 tons/ha in 70 $\times$ 50 cm spacing. The ratio of heavier tuberous roots than 200 g to total tuberous roots decreased significantly according to increase of planting density. Fresh weights of shoot and root, contain the crown bud, were decreased, as planting distance was shorter. Tuberous root number was fewer but its weight was heavier in wide planting than in dense planting. We think that optimal planting density is about 30,000 plants/ha, if it were to be 70 cm row spacing, intrarow spacing should calculate about 47cm.

• The Journal of Korean Academy of Prosthodontics
• /
• v.22 no.1
• /
• pp.7-15
• /
• 1984

A rationale and compendium of treatment for a specific situation of cases have been presented. It consists of a cast metal bar called a truss bar joint removable denture which is soldered to crowns and dowel core on a few remaining teeth, i.e., cuspids or bicuspids. This system gives additional support and retention to the individual teeth and makes possible a more stable removable denture. It is my opinion that the prognosis of the chosen cases may be obtained Successful results when applied on the teeth of less favorable crown-root ratio.

• The Journal of the Korean dental association
• /
• v.22 no.11 s.186
• /
• pp.953-960
• /
• 1984

The author applied the attachment fixation overdenture on the patient whose residual alveolar ridge height was poor to increase mechanical denture retention, and observed the periodontal condition of the abutment roots after insertion of attachment fixation overdenture. The author obtained the conclusions as follows; 1. Attachment fixation overdenture showed better mechanical retention than conventional overdenture did, but it resulted unfavorable crown-root ratio. 2. Within one year after insertion, there were not significant changes in periodontal health, which was indicated by plaque index, gingival index, pocket depth, tooth mobility gingival hyperplasia and alveolar bone change. 3. Mild periodontal thickening was observed. 4. This study emphasized the importance of adequate follow-up care and home care instructions.

• Restorative Dentistry and Endodontics
• /
• v.31 no.5
• /
• pp.378-389
• /
• 2006

The purpose of this study was to compare the sealing ability of root canal obturation with or without the treatment of smear layer. Eighty extracted human teeth with one canal were selected Instrumentation was performed with crown-down technique. After instrumentation, root canals of the NaOCl group and NaOCl-6 group were irrigated with 3% NaOCl. EDTA group and EDTA-6 group were irrigated with 17% EDTA. Then all teeth were obturated using continuous wane obturation technique NaOCl group and EDTA group were immersed in methylene blue solution for 84hours. NaOCl-6 group and EDTA-6 group were immersed in methylene blue solution for 6months. The teeth were sectioned at 1.5 mn (Level 1), 3.0 mm (Level 2) and 4.5 mm (Level 3) from the root apex. The length of dye-penetrated inter-face and the circumferential length of canal at each level were measured using Sigma-Scan Pro 5.0. 1. The mean leakage ratio was decreased cervically. 2. NaOCl group showed higher mean leakage ratio than EDTA group at each level. But there was significant difference at level 1 only (p < 0.05). 3. NaOCl-6 group showed higher mean leakage ratio than EDTA-6 group at each level. But there was significant difference at level 1 only (p < 0.05). 4. NaOCl-6 group showed higher mean leakage ratio than NaOCl group at each level. But there was significant difference at level 1 only (p < 0.05). 5. EDTA-6 group showed higher mean leakage ratio than EDTA group at each level. But there was no significant difference. 6. In NaOCl group and NaOCl-6 group, scanning electron micrographs of tooth sections generally covered with smear layer. In EDTA group and EDTA-6 group, tooth sections showing the penetration of sealers to opened dentinal tubules. The results suggest that removal of smear layer was effective to reduce the apical microleakage of the root canal.

• The korean journal of orthodontics
• /
• v.31 no.3 s.86
• /
• pp.325-333
• /
• 2001

Optimal orthodontic treatment could be possible when a orthodontist can predict and control tooth movement by applying a planned force system to the dentition. The moment to force(M/F) ratio at the bracket, has been shown to be a primary determinate of the pattern of tooth movement. As various n/F ratios are applied to the bracket on the tooth crown, strain distribution in periodontium can be changed, and the center of rotation in tooth movement can be determined. It is, therefore, so important in clinicalorthodontics to know the strain distribution in a force system of a M/F ratio. The purpose of this study was to analyze the strain distribution in orthodontic force system by strain gauge attached to tooth root, and to evaluate the usage of the method. For this study, an experimental upper anterior arch model was constructed, where upper central incisors, on the root surface of which, 8 strain gauges were attached, were implanted In the photoelastic resin, as in the case of 4mm midline diastema. Three types of closing of upper midline diastema closure were compared : 1. with elastomeric chain(100g force) in no arch wire, 2. elastomeric chain in .016“ round steel wire, 3. elastomeric chain in .016”x.022“ rectangular steel wire. The results were as follows. 1. Strain distributions on labial, lingual, mesial and distal root surface of tooth were able to be evaluated with the strain gauge method, and the patterns of tooth rotation were understood by presuming the location of moment arm. 2. Extrusion and tipping movement of tooth was seen in closing in no arch wire, and intrusion and bodily movement was seen with steel arch wire inserted.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.4
• /
• pp.701-704
• /
• 2004

In this case, we would like to discuss about the single rooted deciduous mandibular first molar. The deciduous mandibular molar of a five years old boy was shown to have a single root, bilaterally. Ordinarily, the maxilary molars have three roots and the mandibular molars have two roots. However, when the hertwig's epithelial root sheath do not invaginate properly during tooth development, root fusion can occur from the absence of root separation. Molars with fused roots not only have unfavorable crown to root ratio, but also according to many reports, have higher probability of having multiple congenitally missing teeth or dens invaginatus in the maxillary incisors, consequently requiring preventive dental treatment In addition, disorders such as ectodermal dysplasia, syndactyly, clinodactyly, bluish sclera can also be related to this condition. Root fusion is known to be of autosomal recessive inheritance. Up to date, single rooted molars have been reported several times in permanent dentitions but hardly in deciduous dentition, which is the motive for this paper.

• Journal of Korean Society of Forest Science
• /
• v.64 no.1
• /
• pp.1-10
• /
• 1984

Two fast-growing clones 65-29-19 and 66-6-8 and two less fast-growing clones 66-14-29 and 66-14-99 were compared at intensively cultured plots to identify what morphological characters are related to fast growth and high biomass yield of Populus alba ${\times}$ Populus glandulosa $F_1$. The plantations were established in the spring of 1982 and 1983 at the Seoul National University nursery in Suweon. Differences in dry matter production were found among two-year-old clones but not, among one-year-old clones. Highly significant correlations were found between total leaf area per tree and total dry weight per tree and between total branch length per tree and total dry weight per tree for two-year-old clones. This relation was more obvious during the late growing season. Morphological characters desirable for producing high biomass identified in fast-growing clones were as follows; high shoot-root ratio, high leaf surface area per tree, long leaf retention period, and many small leaves and compact crown architecture in the upper portion of true crown.