• 농업과학연구
• /
• 제40권4호
• /
• pp.395-403
• /
• 2013

Plant factory has drawn attention in many countries in the world due to capability of environmental control not only for better yield and quality, but also for increase in functional and medicinal components of the products. In this paper, an experimental plant factory was constructed for various tests under different environmental conditions, and the operations were evaluated. A production room was constructed with adiabatic materials with dimensions of $6,900{\times}3,000{\times}2,500$ mm ($L{\times}W{\times}H$). Four sets of $2,890{\times}600{\times}2,320$ mm ($L{\times}W{\times}H$) production frame unit, each with 9 light-installed beds and an aeroponic fertigation system, resulting in 36 beds, were prepared. Accuracy and response were evaluated for each environmental control component with and without crops. Air temperature, humidity, $CO_2$ concentration, light intensity, frequency, and duty ratio, fertigation rate and scheduling were controllable from a main control computer through wireless communication devices. When the plant factory was operated without crop condition, the response times were 8 minutes for change in temperature from 20 to $15^{\circ}C$ and 20 minutes from 15 to $20^{\circ}C$; 7 minutes for change in humidity from 40 to 65%; and 4 minutes for change in $CO_2$ concentration from 450 to 1000 ppm. When operated for 24 hours with crop cultivation; average, maximum, and minimum values of temperatures were 20.06, 20.8, and $18.8^{\circ}C$; humidity were 66.72, 69.37, and 63.73%; $CO_2$ concentrations were 1017, 1168, and 911 ppm, respectively. Photosynthetic Photon Flux Density was increased as the distance from the light source decreased, but variability was greater at shorter distances. Results of the study would provide useful information for efficient application of the plant factory and to investigate the optimum environment for crop growth through various experiments.

• 동아시아식생활학회지
• /
• 제3권1호
• /
• pp.12-17
• /
• 1993

This book is named 'The Ryuk-Jab-Rok' because it was written in the last page of 1820's almanac. This book is written purely in Korean and has not been published yet. This book comprises twenty eight items, among which there are eight items of vegetable preserving method, ten items of Jook preparation methods(a kind of cereal soup), nine items of Pyun-Myun methods(a kind of rice cakes and noodles) and Yak-Bab(a kind of spiced rice). In vegetable preserving method, the eggplant, the cucumber and a songi mushroom were preserved with the drying method., A radish, a sorojangii, and the root of white cabbage were used with the cold temperature preservation. A garlic was dried after salting. The sprouts of DooRub, which were coming in the hot room, were used. In the Jook preparations, there were five animal materials which were lamb, chick, crudian, oyster and abalone. In nine Pyun-Myun methods, Jap-Gua-Sil was illegible because the letters were not clear. Among eight items, the stick rice was used in four cases, the regular rice in two cases. The ground pine nuts, honey and the Chinese date were used most ofter. And the sesame salt and the chestnut were next. The analysis of the terms I this book revealed that 26 items were used for cooking processes. And it also showed us that there were seven kind of cutting procedure and eight kinds of heating procedure. The shapes and size of foods were revealed at only three places in all items. The one-chi(chi ; abut three cm) and three-Ja(Ja ; about thirty cm) which the terms represent the length were revealed twice and once respectively in this book. In the taste description, 'the good', the most common word, was used in seven times, and which was the most frequently introduce case. The measuring unit is hard to revive since the measurements were taken by the container, which were Jong-Ja, Sabal and Tang-gii, then in use. Fifteen kinds of containers and cookers were used for preparing foods. And all of them are now I use.

• 한국치위생학회지
• /
• 제16권2호
• /
• pp.313-319
• /
• 2016

Objectives: The objective of the study was to infection control by analyzing the influence of working environment on infection control activities in the dental hygienists. Methods: The cross-sectional study was based on a survey on a total of 377 dental hygienists working in dental settings. Multiple linear regression analysis was performed to examine the relationship of general characteristics and infection control activities. All statistical analyses were performed using the SPSS for Windows version 20.0, and p<0.05 was considered to be significant. Results: Predictive powers(=Adjusted $R^2$ of the investigated factors such as operation room, sterilization disinfection laundry, dental unit waterline, staff individual, infection control system, personal protective equipment, medical waste, hand hygiene, oral surgical procedures, clinical contact surfaces were adjusted $R^2=0.394$, 0.306, 0.277, 0.244, 0.241, 0.177, 0.165,, 0.154, 0.134, 0.124 respectively. Conclusions: In order to enhance infection control activities, the program development and implementation for the aseptic procedure is very important. The program should include periodic reinforcement of infection control education and regular monitoring of infection control activities.

• Journal of Trauma and Injury
• /
• 제30권4호
• /
• pp.166-172
• /
• 2017

Purpose: Thoracic traumas represent 10-15% of all traumas and are responsible for 25% of all trauma mortalities. Traumatic cardiac injury (TCI) is one of the major causes of death in trauma patients, rarely present in living patients who are transferred to the hospital. TCI is a challenge for trauma surgeons as it provides a short therapeutic window and the management is often dictated by the underlying mechanism and hemodynamic status. This study is to describe our experiences about emergency cardiac surgery in TCI. Methods: This is a retrospective clinical analysis of patients who had undergone emergency cardiac surgery in our trauma center from January 2014 to December 2016. Demographics, physiologic data, mechanism of injuries, the timing of surgical interventions, surgical approaches and outcomes were reviewed. Results: The number of trauma patients who arrived at our hospital during the study period was 9,501. Among them, 884 had chest injuries, 434 patients were evaluated to have over 3 abbreviated injury scale (AIS) about the chest. Cardiac surgeries were performed in 18 patients, and 13 (72.2%) of them were male. The median age was 47.0 years (quartiles 35.0, 55.3). Eleven patients (61.1%) had penetrating traumas. Prehospital cardiopulmonary resuscitations (CPR) were performed in 4 patients (22.2%). All of them had undergone emergency department thoracotomy (EDT), and they were transferred to the operating room for definitive repair of the cardiac injury, but all of them expired in the intensive care unit. Most commonly performed surgical incision was median sternotomy (n=13, 72.2%). The majority site of injury was right ventricle (n=11, 61.1%). The mortality rate was 22.2% (n=4). Conclusions: This study suggests that penetrating cardiac injuries are more often than blunt cardiac injury in TCI, and the majority site of injury is right ventricle. Also, it suggests prehospital CPR and EDT are significantly responsible for high mortality in TCI.

• 한국전기전자재료학회논문지
• /
• 제25권6호
• /
• pp.486-490
• /
• 2012

$La_{7.33}Bi_2(SiO_4)_6O_2$ specimens were fabricated by standard solid-state synthesis route for solid oxide electrolytes. The calcined powders exhibited uniform particles with a mean particle size of about $28{\mu}m$. The room-temperature structure of $La_{7.33}Bi_2(SiO_4)_6O_2$ specimens was analyzed as hexagonal, space group P63 or P63/m, and the unit cell volume increased with increase a sintering temperature. The specimens sintered at $1,175^{\circ}C$ showed X-ray patterns of homogeneous apatite single phase without the second phase such as $La_2Si_2O_7$ and $La_2SiO_5$. The specimen sintered at $1,175^{\circ}C$ showed the maximum sintered density of 5.49 $g/cm^3$. Increasing the sintering temperature, total conductivities increased, activation energy decreased and the values were $1.98{\times}10^{-5}Scm-1$ and 1.23 eV, respectively.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제22권3호
• /
• pp.45-56
• /
• 2016

Purpose: The MERS(Middle East Respiratory Syndrome) outbreaks in Korea highlighted dramatically the failings of traditional hospital environment for controlling or preventing infections among both patients and healthcare workers. MERS is transmitted by droplets that can be airborne over a limited area. The point should be emphasized that MERS in South Korea was predominantly a hospital-acquired (not a community-acquired) infection, because approximately 93% of MERS cases were resulted from exposure in hospital settings. This paper tries to suggest the design guidelines of negative pressured isolation ward for the sake of proper control of severe respiratory infectious diseases. Methods: Literature survey on the design guideline and regulations of airborne infection wards in Korea, Europe U.K. and CDC of U.S. have been carries out. 4 special infection wards in Hongkong, Germany, Japan and Korea have been surveyed in order to make the best use of the experiences related to facility design and operations. Results: Operating system influencing the facility design, space organizations of infectious ward including required space and zoning, and circulations of patients, staffs and materials are proposed. Implications: The results of this paper can be the basic data for the design of the airborne infection ward and relevant regulations. Afterwards in-depth study such as the development of space standards for the single bedroom, locker room and so on could be explored.

• 성인간호학회지
• /
• 제20권5호
• /
• pp.778-790
• /
• 2008

Purpose: This study was conducted to develop Web-based multimedia contents for supporting student nurses' clinical practice on critical care, and to evaluate learners' responses. Methods: Based on the steps of Assessment, Design, Development, Implementation, & Evaluation(ADDIE) model, a total of 13 self-directed learning modules including live lectures and real video clips were developed through faculty collaboration of nine nursing colleges in Gwangju and Chonnam province. The finally developed multimedia contents were published on the Web of the learning management system at a local e-learning center. Results: The Web contents were evaluated after self-learning by 81 junior college nursing students who were encouraged to study it at their own pace during their two-week clinical practice at a medical or surgical intensive care unit of a university hospital and two hospitals. The knowledge (t = -27.66, p < .001) and self-evaluated clinical performance level(t = 7.54, p < .001) were significantly increased after learning of the Web contents and clinical practice, and satisfaction level that measured post-test only was 4.0 out of 5 point. Conclusion: The use of Web contents for critical care need to be extended as a complimentary material in a class room lecture or clinical practice of students to increase their self-learning ability and understandings of clinical knowledge and situation.

• 방송공학회논문지
• /
• 제15권5호
• /
• pp.617-630
• /
• 2010

고해상도 비디오에 대한 압축 성능 향상을 위해 ITU-T VCEG에서는 H.264/AVC 표준을 근간으로 다양한 압축 성능 개선 기법들을 추가해 왔는데, 그중 ALF 기법은 양자화에 의해 발생한 오류를 제거할 수 있는 필터링 방법을 제공함으로써, 고해상도 영상에서 평균 9%의 매우 높은 성능 개선 능력을 보이는 핵심 기술이다. 하지만 기존의 ALF는 한 프레임 내에서 하나의 Wiener 필터만을 사용하므로, 다수의 서로 다른 통계적 특성을 가진 영역이 존재하는 경우에는 능률적인 오류 복원 성능을 제공하기 어려운 한계를 가지고 있다. 따라서 본 논문에서는 한 복호 프레임에 존재하는 다양한 영역 별 통계적 특성을 반영하여 보다 유연한 율-왜곡 관점에서의 ALF 선택이 가능할 수 있도록, 적응적 율-왜곡 최적 다중 루프 필터 기법을 제안한다. 제안 알고리즘을 통해 다양한 영상에 대하여 기존 알고리즘의 성능을 안정적으로 개선할 수 있었으며, 영상에 뚜렷한 특성 차이를 지닌 복수의 오브젝트가 존재할 경우에는 더욱 높은 비트율 감소 이득을 얻을 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제19권4호
• /
• pp.17-26
• /
• 1995

In general existing air conditioning devices, which are carried out by convection heat transfer, are very popular compared with the radiation type air conditioning devices. But perconal convection tpe air conditioning units are unuseful air conditioning type because it handles amount of surrounded air to meet the temperature and humidity. In this view, this study is intended to develope personal dir conditioning units using a radiation type radiator. Liquid Droplet Radiator(L.P.R.) radiates the energy by means of thermal radiation. Radiative energy from L.P.R. is the infrared rays which heat the objects without lose of energy. It is a desirable heating method for the local area within the large room. In this study, the analysis uses the Monte Carlo methd to predict the temperature distribution in the droplet sheet and the net heat flux from the L.D.R.. And for this study and experiment was carried out to analyse the radiative and convective heat transfer characteristics in the L.D.R.. And the experiment was investigated the effects of inlet temperature, feed rate, optical thickness and droplet diameter on heat transfer characteristics of L.D.R.. The obtained results from the numerical and experimental studies of L.D.R. were as follows ; (1) The heat flux of L.D.R. was effected by extinction coefficient of droplet sheet, optical thickness and droplet temperature, surface area and emissivity of the droplet. And it was increased with the temperature, feed rate and optical thickness, on the other hand decreased with increasing of droplet diameter. (2) The experimental results for heat flux was ecalucted below 20% than that of the numerical solution by Monte Carlo method, but the tendency of the variation shows relatively good agreement.

• 한국농촌건축학회논문집
• /
• 제6권2호
• /
• pp.1-10
• /
• 2004

The purpose of this study is to clarify the actual condition of the layout and floor planning of elementary schools for the 7th education curriculum. This article discuses about the basic characteristics of the plan composition and the outdoor spaces of 35 elementary schools in Gyeongnam prefecture. The results of this study are summarized as follows; 1) To respond to the 7th educational curriculum, unit classrooms need to be expanded or space for a multi-purpose room needs to be secured to serve the following purposes: the operation of educational program by the level and offering of unified Subjects. overall, elementary schools need to seek ways to deal with problems associated with space composition, types of classrooms, and changes in the number of classrooms so that the 7th Educational curriculum can be carried out smoothly. 2) Different from the past, various plan types are available nowadays. Even in case of schools with the same class size, their areas were different by 130 percentages or higher. Therefore, practicality needs to be more focused than facility standards in order for the school to cope with changes in future educational environment. 3) When designing the elementary school in the future, more space needs to be assigned for learning by expanding facilities - special purpose classrooms and supporting facilities - to accommodate students' various learning activities. In addition, faculty facilities need to be rearranged to promote research and development as well as to ensure the operation of the educational program. And, resident facilities that consider the close connection with the local community need to be rearranged in an efficient manner as well.