• 생물환경조절학회지
• /
• 제20권2호
• /
• pp.78-82
• /
• 2011

온실의 환기설계 기준 설정 및 단동 플라스틱 온실의 원형 천창 설치 가이드라인 제정을 위한 기초자료를 제공할 목적으로 천창이 설치된 토마토 재배 단동 온실에서 환기실험을 통하여 자연환기 성능을 분석하고, 열평형 모델을 이용하여 온실 재배 토마토의 증발 추정하였다. 직경 60cm의 원형 천창을 지붕의 중앙에 8m 간격으로 설치한 단동온실의 자연환기 성능을 실험한 결과 환기회수는 분당 0.02~0.32회(평균 0.17회 $min^{-1}$)의 범위를 보여 상당히 낮은 것으로 나타났다. 그러나 상업용 온실의 권장환기율과 비교하면 6m 간격으로 설치할 경우에는 봄이나 가을철에 필요한 환기량을 충족할 수 있을 것으로 판단되며, 여름철 권장환기를 위해서는 2m 정도의 간격으로 설치한 해야만 가능할 것으로 판단되므로 광투과를 저해하지 않으면서 지붕의 개구면적을 확대할 수 있는 방안을 찾아야 할 것으로 생각된다. 실험에 사용한 단동 온실은 인접 동 간격이 1.2m에 불과한 밀집된 단지 내에 위치하고 있어서 측창 주변의 외부 풍속이 최대 $0.9m{\cdot}s^{-1}$(평균 $0.4m{\cdot}s^{-1}$에 불과하고 풍력에 의한 환기효과를 기대하기가 어려웠다. 환기량과 풍속 및 실내외 온도차와의 관계를 비교 분석해 본 결과 중력환기가 우세함을 확인 할 수 있었다. 본 환기실험 자료를 온실의 환기설계를 위한 열평형모델에 적용하여 증발산계수를 추정해 본 결과 0.39~0.85의 범위(평균 0.62)를 보였고, 다른 연구자들이 제시하는 일반적인 온실의 설계 권장 값과 유사한 경향을 나타냈다. 따라서 토마토 재배 단동 플라스틱 온실의 환기설계에서 증발산계수는 0.6 정도를 사용하면 적당할 것으로 판단된다.

• 한국소음진동공학회논문집
• /
• 제24권2호
• /
• pp.108-116
• /
• 2014

With the increasing the importance of emotional quality of vehicle, the sound quality of systems with electric motor components has become increasingly important. Electric motors are used for windows, seats, sun roof, mirrors, steering columns, windshield wiper and climate control blowers, etc. In this paper, a study was conducted to identify sound quality factors that contribute to customer's satisfaction and preference of the window lift system. Jury test for subjective evaluation was carried out and sound quality index was developed. Averaged sound pressure level and sharpness were significant factors when glass moves down. Also, maximum loudness at stop section and averaged loudness were significant factor when glass moves up. Next, noise source identification was carried out using beam forming method during glass transferred section and impulsive noise at stop section. Several improvement methods were applied using the source identification result. And finally, the degree of sound quality improvement was judged using sound quality index.

• 한국태양에너지학회 논문집
• /
• 제35권2호
• /
• pp.93-101
• /
• 2015

Zero energy building is a self sufficient building that minimizes energy consumption through passive elements such as insulation, high performance window system and installing of high efficiency HVAC system and uses renewable energy sources. The Korea Government has been strengthening the building energy efficiency standard and code for zero energy building. The building energy performance is determined by the performance of building envelope. Therefore it is important to optimize facade design such as insulation, window properties and shading, that affect the heating and cooling loads. In particular, shading devices are necessary to reduce the cooling load in summer season. Meanwhile, BIPV shading system functions as a renewable energy technology applied in solar control facade system to reduce cooling load and produce electricity simultaneously. Therefore, when installing the BIPV shading system, the length of shadings and angle that affect the electricity production must be considered. This study focused on the facade design applied with BIPV shading system for maximizing energy saving of the selected standard building. The impact of changing insulation on roof and walls, window properties and length of BIPV shading device on energy performance of the building were investigated. In conclusion, energy consumption and electricity production were analyzed based on building energy simulations using energyplus 8.1 building simulation program and jEPlus+EA optimization tool.

• 건축역사연구
• /
• 제12권1호
• /
• pp.25-41
• /
• 2003

This paper is a study of Le Corbusier's trace regulateur of the 1920s, particularly its role in the design of the Villas La Roche-Jeanneret and Stein-de Monzie. It proceeds on the basis of the following three themes: first, the relation between the regulating line and the dom-ino frame; second, its status as a proportional device based not on a module system but one that defines relations; third, its function as an essential practical device in the design process. In the Villa La Roche-Jeanneret, the embedded horizontal planes of the dom-ino frame were constant, but the vortical lines of the columns were altered according to the changes in plan. Initially, a left-hand bay window formed a symmetry with the right-hand bay window, the only constant in the design process. With subsequent changes, mullion sections of the horizontal window and roof elements came to provide the reference points for the regulating line. Eventually, a regulating line different from the one that controlled the bay window and the elongated volume came to control the entrance hall of Villa La Roche, resulting in three different kinds of regulating lines in the final version. In contrast to the Villa La Roche-Jeanneret, a singular and consistent regulation line was anticipated in the earliest design stages of the Villa Stein-de Monzie. The repetition of its A:B grid and the standard $2.5m{\times}1.0m$ sliding window determined the proportions of both its plan and elevation, and thus the regulating line became 'automatic,' losing its viability as a practical tool. Though the regulating titles of the La Roche-Jeanneret look as if they were an afterthought, drawn after the design was complete, they were most active, requiring tenacity and discipline in their application. On the other hand, the seemingly 'redundant' regulating line of the Villa Stein-de Monzie gains its raison d'etre from the dom-ino frame. Its cantilevers and uninterrupted horizontal window could be used in decisive fashion because of the guarantee that the correct proportion would always be maintained. Thus we discover that Le Corbusier's discipline of the 1920s had a certain spectrum of flexibility. His 'parti' ranged from the extremely loose and malleable grid of the Villa La Roche-Jeanneret to the fixed grid of the Villa Stein-de Monzie. In different ways, these projects retain the tension between the dom-ino frame and the regulating line. For Le Corbusier, as much as the grid was an object with fixed attributes, it was also an active medium manipulated by the will of the architect.

• 한국조경학회지
• /
• 제28권1호
• /
• pp.37-47
• /
• 2000

This research focused on the improved alternatives of the ordinance which practically control the open space in-situ, public open space and landscape construction related to city landscape for the healthy physical and mental life of the city dwellers. The contents of the study are as follows: 1. The special law of Landscape Architecture should be legislated. 2. The portion of landscaping should be changed by up-grading in the Ordinance of Landscape area and planting and the terms of landscape Facilities should include the ecological aspects in it's contents in the law. 3. The administration of local governments should actively lead and support the dwellers to make the roof gardens and the window gardens in the building area of cities or commercial districts which have relatively low rate of green space. 4. Any new construction and restoration of the buildings with preservation of the natural environment and creation of public open space should be given incentive and Set-back space in aesthetic area should have appropriate planting area and facilities in it. 5. Organizing professional landscape evaluation committee and composing evaluation standards are very important because of the contemporary proposition of the establishment of the establishment of ecological space and conservation of urban natural space. Because of the characteristics of Landscape Architecture, the Provisions of landscape Architecture Design and landscape architecture supervision of the specialist should be legislated and the Landscape Architectural Organization should be established within the Government.

• KIEAE Journal
• /
• 제11권6호
• /
• pp.139-149
• /
• 2011

This study focuses on design tendencies in office buildings of public institutions after tightening up Korea's building energy performance criteria. Important office design criteria and recommendations pay attention to the issues such as building orientation, greening buildings, building form, space and envelop by intensifying building energy performance related laws, government guidelines and evaluation systems. The design tendencies explored in this research are as follows. Office buildings mainly face south and have various types of indoor and roof green spaces not for ecological reasons but for the rest. Building depth becomes thinner and atria are inserted into office buildings to improve daylighting and natural ventilation. Building cores are located on north or west and east sides acting as buffer spaces to reduce heat loss and to block solar radiation. Office building envelop design includes various creative ideas to control or utilize solar energy as like three dimensional or double structured skin and window size variation to cope with the intensity of solar radiation. Further, solar energy generation systems are integrated with building component such as roofs, sun screens and windows. This study demonstrates that government's reinforcement of the building energy performance criteria drives the change in design methods and approach.

• 생물환경조절학회지
• /
• 제22권1호
• /
• pp.73-79
• /
• 2013

본 연구에서는 온실의 열손실을 최소화할 방안을 모색하기 위하여 경남지역에 있는 시설 농가를 대상으로 열화상 카메라를 이용하여 열손실 사례에 대한 실태조사를 실시하였다. 그 결과를 요약하면 다음과 같다. 치마처리 전 후의 두 실험구간의 온도차는 각각 $2.0{\sim}3.0^{\circ}C$ 및 $1.0{\sim}2.0^{\circ}C$ 정도인 것을 알 수 있다. 열화상 기기에 의해 계측된 온도와 온도 센서에 의해 계측된 온도와는 상관 관계가 큰 것으로 나타났다. 실태조사 지역 간에 큰 차이는 없었지만 보온용 부직포가 1층인 경우와 2층인 경우를 보면, 1층이 2층에 비해 상대적으로 열손실 크게 나타났다. 그리고 전체적으로 온실의 형태와 무관하게 측장부분과 수평보온커튼의 틈새, 측면과 전 후면 보온용 부직포의 이음부분이 완전히 밀폐되지 않아 열손실이 상대적으로 큰 것으로 나타났다. 특히, 파손된 피복재나 출입문, 환기구, 박공, 바닥부근 등에서 틈새가 생겨서 많은 양의 열이 손실되고 있었다.

• 인간식물환경학회지
• /
• 제23권6호
• /
• pp.655-665
• /
• 2020

Background and objective: This study was conducted to compare the cultivation environment, growth of cut flowers, and management performance of conventional farms and smart farms growing the standard cut chrysanthemum, 'Jinba'. Methods: Conventional and smart farms were selected, and facility information, cultivation environment, cut flower growth, and management performance were investigated. Results: The conventional and smart farms were located in Muan, Jeollanam-do, and conventional farming involved cultivating with soil culture in a plastic greenhouse, while the smart farm was cultivating with hydroponics in a plastic greenhouse. The conventional farm did not have sensors for environmental measurement such as light intensity and temperature and pH and EC sensors for fertigation, and all systems, including roof window, side window, thermal screen, and shading curtain, were operated manually. On the other hand, the smart farm was equipped with sensors for measuring the environment and nutrient solution, and was automatically controlled. The day and night mean temperatures, relative humidity, and solar radiation in the facilities of the conventional and the smart farm were managed similarly. But in the floral differentiation stage, the floral differentiation was delayed, as the night temperature of conventional farm was managed as low as 17.7℃ which was lower than smart farm. Accordingly, the harvest of cut flowers by the conventional farm was delayed to 35 days later than that of the smart farm. Also, soil moisture and EC of the conventional farm were unnecessarily kept higher than those of the smart farm in the early growth stage, and then were maintained relatively low during the period after floral differentiation, when a lot of water and nutrients were required. Therefore, growth of cut flower, cut flower length, number of leaves, flower diameter, and weight were poorer in the conventional farm than in the smart farm. In terms of management performance, yield and sales price were 10% and 38% higher for the smart farm than for the conventional farm, respectively. Also, the net income was 2,298 thousand won more for the smart farm than for the conventional farm. Conclusion: It was suggested that the improved growth of cut flowers and high management performance of the smart farm were due to precise environment management for growth by the automatic control and sensor.

• 생물환경조절학회지
• /
• 제29권1호
• /
• pp.52-61
• /
• 2020

겨울철 벤로형 유리온실(W59×L68×H5.9m) 보온스크린 높이의 차이에 따른 실내온도 변화를 파악하기 위하여 00시부터 04시까지 30분 간격으로 열유동해석을 하였다. 초기에는 상대적으로 난방 외부접촉면적이 큰 보온스크린 설치높이 5.9m에서 보온스크린 설치높이 4.1m에 비해 온도감소가 빨라 낮은 온도를 나타냈으나 해석 2시간 이후부터는 상대적으로 온도감소가 느렸고 04시에는 0.6℃ 높았다. 그러나 해석시작1시간 후 실내온도가 약13℃까지 내려가고, 그 이전에 난방기가 작동해야 된다고 볼 때, 해석 2시간 동안 온도감소가 상대적으로 느렸던 보온스크린 설치높이 4.1m에서 5.1m에 비해 난방에너지 절감에 유리할 것으로 판단되었다. 토마토가 자라는 지면 2m 높이에서의 유동은 보온스크린 설치높이 5.9m에서 4.1m에 비해 상대적으로 넓고 빨랐으며 유동해석 1시간 후인 01시의 평균차이는 0.034m·s^-1였다. 여름철 차광스크린 설치높이를 5.7m와 3.9m로 달리하되70%닫힘 조건에서 12시부터 13시까지는 온실하부덕트 외부공기유입량 0.67㎥·s^-1 상태 그 후부터는 외부 유입공기를 3배로 증가하여 냉방효과를 비교하였다. 초기 12시부터 13시까지는 차광스크린 70%닫힘 상태에서 무차광에 비해 오히려 평균 약0.9℃ 높았지만 외부공기유입량이 증가하는 13시 이후 부터는 차광스크린 70%닫힘 조건에서 온도가 감소하였고 14시 30분에는 무차광에 비해 0.5℃ 낮았다. 차광스크린 70% 닫힘 조건에서 바닥면의 온도분포는 스크린 설치높이와 개방 정도에 비례하여 낮았으며 무차광에 비해 8℃이상 낮았다. 온실 내 상대습도는 차광스크린을 30% 개방하는 조건에서는 차광스크린의 높이나 개방정도에 따른 차이가 미미하였다.