• Wind and Structures
• /
• 제32권2호
• /
• pp.115-126
• /
• 2021

The snow cornice mass on the formation zone had triggered avalanches which led to the loss of human life and property. Snow cornice is formed due to flow separation on the leeward side. Effect of lee slope is more prominent in the formation of snow cornices as compared to the windward slope. The analysis of wind flow pattern has been carried out to evaluate the performance of a jet roof. Computational Fluid Dynamics (CFD) analysis of wind flow over a 2D hill model was carried out using RNG based k-∈ turbulence models available in ANSYS Fluent. Effect of varying leeward hill slope (1:2 to 1:6) on flow separation for the given windward slope was observed and a critical slope of 1:4 was found at which the separation zone ceased to exist. The modification of wind flow over a hill due to the installation of jet roof was simulated. It was observed that jet roof had significantly modified the wind flow pattern around hill ridgeline and ultimately snow cornice formation had mitigated. The results of the wind flow pattern were validated with the wind data collected at the experimental site, Banihal Top (Jammu and Kashmir, India). The wind flow simulation over the hill and mitigation of cornice formation by the jet roof has been explained in the present paper.

• 대한건축학회연합논문집
• /
• 제21권4호
• /
• pp.139-146
• /
• 2019

The purpose of this study is to propose the building design guideline considering photovoltaic panel installation through the analysis of relevant guidelines from home and abroad in terms of building design and solar panel installation. Conclusions can be summarized as followings; Considerations in building design : selection of the site with high solar accessibility, avoidance of the shade from the adjacent building & trees, south facing orientation of solar panel in building design, removal of shade on the solar panel from the part of building itself, load consideration of solar panel & fixing materials, safe passage securement for solar system maintenance, and planning of piping and mechanical room for solar system. Considerations in solar panel installation : harmonizing of solar panel with surrounding environment, unity of solar panel orientation & slope, regular maintenance of solar system, (in case of flat roof installation) solar panel installation afloat over the roof, installation area within the roof floor, and lower than parapet height, (in case of sloped roof installation) solar panel installation parallel with the roof slope, ventilation space securement below the panel, installation area within the roof surface, and similar material installation in empty space.

• Structural Engineering and Mechanics
• /
• 제86권4호
• /
• pp.503-518
• /
• 2023

In tall constructions, the outriggers are regarded as a structural part capable of effectively resisting lateral loads. This study analyses the efficacy of hybrid outrigger system in high rise RCC building for various structural parameters identified. For variations in α, which is defined as the ratio of the relative flexural stiffness of the core to the axial rigidity of the column, static and dynamic analyses of hybrid outrigger system having a virtual and a conventional outrigger at two distinct levels were conducted in the present study. An investigation on the optimal outrigger position was performed by taking the results from absolute maximum inter storey drift ratio (ISD_max), roof acceleration (acc_roof), roof displacement (disp_roof), and base bending moment under both wind and seismic loads on analytical models having 40, 60 and 80 storeys. An ideal performance index parameter was introduced and was utilized to obtain the optimal position of the hybrid outrigger system considering the combined response of ISD_max, acc_roof, disp_roof and, criteria required for the structure under wind and seismic loads. According to the behavioural study, increasing the column area and outrigger arm length will maximise the performance of the hybrid outrigger system. The analysis results are summarized in a flowchart which provides the optimal positions obtained for each dependent parameter and based on ideal performance index which can be used to make initial suggestions for installing a hybrid outrigger system.

• 국제학술발표논문집
• /
• The 5th International Conference on Construction Engineering and Project Management
• /
• pp.553-557
• /
• 2013

Roof and exterior wall are designed and constructed in a manner that prevents the accumulation of water within the wall and roof assembly in the formal building. However, in a freeform building there is no clear distinction between exterior wall and roof. In other words, the exterior walls and roof systems of the freeform building are integrated as a surface, unlike the formal building envelope. Therefore, freeform architecture needs a systemized envelope design method to perform functions of exterior wall and roof. However, in many cases, construction methods for roof and exterior wall are applied to freeform buildings without necessary alterations, which lead to incomplete design, leakage, cracks and other problems. Freeform architecture is thus designed and constructed differently from formal buildings. In order to more easily and inexpensively actualize freeform architecture, Building Information Modeling (hereinafter referred to as BIM) has recently been applied in the construction industry. The studies and case analysis are not sufficient to identify the implications and contributions of freeform buildings in future similar projects. Therefore, this research will study design and construction methods for freeform surfaces. This study attempts to analyze the pros and cons of each method for the concrete surface frame, and then presents the panel options for envelope system of the freeform architecture.

• 고문화
• /
• 제70호
• /
• pp.89-108
• /
• 2007

인각와는 백제기와의 특징이라 할 수 있으며 익산에서 가장 많이 출토되고 있다. 그 종류와 출토량 그리고 출토유적의 성격을 살펴보면 왕실과 관계 깊은 유적에서 주로 사용하였다는 것을 알 수 있다. 또한 제작기법이 같다는 것은 특정 와공집단에 의해 생산되었을 가능성이 크다. 생산시기에 대해서는 간지명인각와를 참고하였다. 그 결과 크게 무왕 즉위를 전후한 시기와 기축년(629)을 중심으로 한 7세기 제2/4반기 두 시기로 나뉘어 생산된 것으로 추정하였다. 이와 함께 왕궁리유적과 미륵사지의 창건기 수막새도 문양과 출토량 등을 검토한 결과 인각와와 같이 두 시기로 나뉘어 생산 공급되었음을 알 수 있었다. 생산배경에 대해서는 제작기법 생산시기와 함께 오부와 오항을 나타내는 인각와의 성격을 검토하였다. 무왕 주체의 조영사업에 필요한 기와생산에는 왕실만으로 그 재원을 확보할 수 없었기 때문에 오부뿐만 아니라 오항에서도 원조가 이루어졌다. 이러한 배경 하에 성립된 기와생산은 관 주도의 일원화된 체제하에서 이루어졌는데 이때 생산된 인각와의 인장을 인증 또는 검정을 위해 만든 것으로 날인 주체는 기증자도 생산자도 아닌 정해진 수량을 확인하고 날인할 수 있는 검사관으로 판단된다.

• Geomechanics and Engineering
• /
• 제21권1호
• /
• pp.23-33
• /
• 2020

An advancing cutting roof for gob-side entry retaining with no-pillar mining under specific geological conditions is more conducive to the safe and efficient production in a coalmine. This method is being promoted for use in a large number of coalmines because it has many advantages compared to the retaining method with an artificial filling wall as the gateway side filling body. In order to observe the inner structure of the gateway cutting roof and understand its stability mechanism, an equivalent material simulation experiment for a coalmine with complex geological conditions was carried out in this study. The results show that a "self-stabilization bearing structure" equilibrium model was found after the cutting roof caving when the cut line deviation angle was unequal to zero and the cut height was greater than the mining height, and the caving roof rock was hard without damage. The model showed that its stability was mainly controlled by two key blocks. Furthermore, in order to determine the optimal parameters of the cut height and the cut line deviation angle for the cutting roof of the retaining gateway, an in-depth analysis with theoretical mechanics and mine rock mechanics of the model was performed, and the relationship between the roof balance control force and the cut height and cut line deviation angle was solved. It was found that the selection of the values of the cut height and the cut line deviation angle had to conform to a certain principle that it should not only utilize the support force provided by the coal wall and the contact surface of the two key blocks but also prevent the failure of the coal wall and the contact surface.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2009년도 추계학술발표대회 논문집
• /
• pp.100-103
• /
• 2009

The impermeable area on the surface of city has been increased as buildings and artificial landcover have continually been increased. Urban development has gradually decreased the green zone in downtown and alienated the city from the natural environment on outskirt area devastating the natural eco system. There arise the environmental problems peculiar to city including urban heat island phenomenon, urban flood, air pollution and urban desertification. As one of urban plans to solve such problems, green roof system is attracting attentions. The purpose of this study was to investigate the heat reduction effect according to the development of green roof system and to quantify the heat reduction effect by analyzing through simulation the heat environment before and after green roof system. For thermal environment analysis, Thermo-Render 3.0 was used that was developed by Tokyo Industrial College to simulate. The simulation showed that the heat island index before and after the development of tree-planting on rooftop changed maximum $0.86^{\circ}C$ and the surface temperature changed about $20^{\circ}C$. Only with lawn planting, heat reduction effect was great and it means that the green roof system in low-management-light-weight type is enough to see effect. The simulation identified that only lawn planting for green rooftop brought such difference and could lower the heat island index at a narrow area. It is judged that application of green roof system to wider areas might relieve urban heat island phenomenon positively.

• 한국가스학회지
• /
• 제9권4호
• /
• pp.36-43
• /
• 2005

본 논문은 다구찌 설계방법을 이용하여 LNG저장탱크의 지붕 구조물에 대한 최적설계 조건을 확보하기 위해 FEM해석을 수행하였다. 다구찌 설계방법은 저장탱크 구조물의 설계인자에 가장 큰 영향을 미치는 파라메터를 고찰하고 최적화하는데 유용한 결과를 제시하였다. 다구찌 설계방법으로 수행된 FEM 해석결과에 따르면, LNG저장탱크 지붕 구조물의 최적설계에 필요한 인자로 지붕 중심부의 두께를 언급하고 있다. 안전하면서 효율적인 지붕을 건설하기 위한 철근 콘크리트 지붕의 초기 구조물 설계는 반경방향의 H빔과 원주방향의 L빔을 가능한 작은 수량으로 배열하고 두꺼운 지붕 구조물을 갖춘 LNG 외부탱크가 최적이라는 해석결과를 제시한다.

• 한국가스학회지
• /
• 제13권1호
• /
• pp.34-39
• /
• 2009

지금까지 한국에 도입된 LNG 저장탱크의 지붕형식은 지상식 탱크 및 지중식 탱크를 막론하고 모두 콘크리트 지붕형이었다. 그러나 저장탱크의 대형화와 경제성 측면에서의 장점으로 강재 지붕형 탱크의 도입이 적극적으로 검토되고 있다. 본고에서는 최적 설계된 200,000$k{\ell}$ 강재 지붕형 LNG 저장탱크의 강재지붕에 대한 충격 및 화재 안전성 평가기법을 개발하여 이를 표준화하고 기존의 콘크리트 지붕형 탱크와 비교 평가함으로써 강재 지붕형 탱크의 충격 및 화재에 대한 정량적인 안전성 자료를 확보하였다. 각각 도출된 4가지의 충격하중 및 화재 시나리오에 대해 유한요소해석기법을 이용해서 안전성평가를 수행하였다.

• 한국산학기술학회논문지
• /
• 제14권12호
• /
• pp.6504-6513
• /
• 2013

본 연구에서 농촌주택을 대상으로 농촌주택의 구법과 재료의 지역별 시기별 변화 특징 분석결과, 지붕형태는 팔작지붕/우진각지붕(1970)-평지붕(1980)-맞배지붕(1990), 지붕구조재료는 한식목조/간이한식목조-파라펫눈썹지붕/경사슬래브-양식목조-경량철골조, 지붕마감재료는 초가/한식기와-슬레이트-시멘트/강판-아스팔트슁글/샌드위치패널/몰탈방수, 벽체구조재는 한식목조/간이한식목조-시멘트조적조-RC조-경량철골조/양식목조, 벽체마감재료는 흘미장/회벽-치장벽돌쌓기/시멘트미장위 페인트마감-자연석치장/사이딩/타일, 담장재료는 전시기별로 돌담과 시멘트블록, 마당재료는 흙바닥, 콘크리트가 사용된 것으로 나타났다. 지역별 변화특징으로 주택구조, 지붕형태, 지붕구조재료, 벽체마감재료, 외부공간에서 담장재료와 마당재료는 북부지역, 중부지역, 남부지역별로 농촌주택 특징변화의 차이가 나타났으며, 지붕구조재료, 벽체구조재료는 지역별로 유사한 변화양상이 나타나는 것으로 분석되었다.