• Journal of Biosystems Engineering
• /
• 제36권6호
• /
• pp.407-415
• /
• 2011

Damage to agricultural production caused by insects and diseases affects farming yields. The orchard sprayer is mainly used in the country to protect the fruit in a large area, with less effort and at minimum cost. The excellent performance of the air blast spray increases the fruit protection. Chemical application in orchards has been accomplished by the orchard sprayers with air assist nozzles and a axial fan in Korea. However, the orchard sprayers without ROPS resulted in severe injury or death when operators drive the sprayers improperly on hilly orchard or farming road. This study was to develop a ROPS for the orchard sprayers improving farmer's safety. In this study, the accident case was used in analysing the design and building TOP structure of the orchard sprayer. The maximum impact, body torsion frame structures including the driver's protection are also analysed for adherence to safety regulations. The ROPS safety regulations according to the strength test results were established.

• 한국자동차공학회논문집
• /
• 제22권5호
• /
• pp.50-58
• /
• 2014

The PRT(Personal Rapid Transit) system is highly interested to meet a need for demand-responsive transport service and increasing demands of traffic in Korea recently. And it is being spotlighted as an eco-friendly transportation system. For these reasons, researches on the PRT system are actively undergoing in Korea. In this study, we evaluated the static structural and fatigue strengths based on ASCE-APM standards and ERRI B 12/RP 17 by means of FE simulation. We also evaluate the running stability by multi-body dynamic analyses and the rollover safety by a theoretical static stability factor according to the road modeling scenarios for the PRT system. From the results of this study, we confirmed the durability and running stability of the Korean PRT under development.

• Agricultural and Biosystems Engineering
• /
• 제3권2호
• /
• pp.73-78
• /
• 2002

Cabbage is one of the most important vegetable in Korea. The cabbage production was mainly based on human labor A comprehensive research fur substituting the human labor by machines has been performed until now. In general, cabbage is cultivated on hillside in Korea. Picking up the harvested cabbages in field and carrying to a vehicle fur transportation are very laborious work. Manual transportation of cabbage is likely to damage the quality and is also a cause to increase the cost of cabbage production. This study was to develop and evaluate a prototype cabbage loader fur efficient and safe transportation of cabbage. The developed loader was a semi-tracked vehicle operated by a hydraulic system, allowing the safe transportation and loading of cabbage in a steep field. The maximum loading weight of the loader was 1.0 ton. By using two sets of safety devices attached to the loader to avoid the roll-over in a steep field, the static rollover slopes were increased up to 34.0% and 37.4% fur the left and the rear direction, respectively The maximum field speed was about 6km/hr with two cabbage pallets of 750kg at a 25% inclined field. The loading capacity of the loader was about 35 pallets/hr when picking up, carrying, and unloading two cabbage pallets for one loading operation. The loading capacity was more than 8 times in comparison with the conventional human labor. The developed loader could be used fur loading and carrying the other vegetables. The study suggested a possible approach for designing the field machines operated on hillside.

• 한국ITS학회 논문지
• /
• 제12권3호
• /
• pp.65-77
• /
• 2013

최근 교통사고 및 교통사고로 인한 사상자수의 감소를 위해 기존의 자동차에 각종센서나 통신기술 등의 첨단 ICT기술을 융합한 첨단안전자동차에 대한 연구가 활발히 진행 중에 있다. 이러한 첨단안전자동차 기술의 시장진입 및 관련 기술 도입을 위해서는 자동차에 도입되는 첨단안전 기술에 대한 효과 분석에 따른 도입 타당성 평가가 필요하다. 본 연구에서는 첨단안전자동차 기술 중 운전자지원시스템(ADAS: Advanced Driver Assistant System)을 대상으로 효과분석 방법론을 개발하고, 개발한 방법론을 차선이탈경고장치(LDWS: Lane Departure Warning System)와 자동비상제동장치(AEBS: Automatic Emergency Braking System)에 적용한 사례분석을 통해 사고감소효과를 추정하였다. 분석결과, 차선이탈경고장치는 관련 사고유형(정면충돌, 도로외이탈, 공작물추돌, 전도전복)에 대해 약 10~14%의 사고감소 효과가 있는 것으로 나타났으며, 자동비상제동장치는 추돌사고에 대하여 약 50%의 사고감소 효과를 보이는 것으로 나타났다. 본 연구의 결과는 추후 첨단안전자동차 기술 개발에 따른 효과분석시 기초자료로 활용이 가능할 것이며, 운전자, 탑승자, 보행자를 위한 자동차 기술의 발전 및 기술도입 타당성을 제시하기 위한 근거 자료로 활용이 가능할 것으로 기대된다.

• 한국인터넷방송통신학회논문지
• /
• 제10권5호
• /
• pp.209-213
• /
• 2010

본 논문에서는 차량용 네트워크인 CAN(controller area network)와 연계되어 다양한 안전진단을 가능하게 하는 안전진단 센서하드웨어를 구현하고 그 성능을 확인하였다. 본 연구를 통하여 새롭게 설계 및 구현된 안전진단센서 하드웨어는 차량용 CAN인터페이스와 연결되며, 안전진단을 위한 다양한 센서(충돌센서, 거리 센서 등)의 데이터를 취득하고 이를 처리하여 CAN, RS232, RS485, I2C등의 통신인터페이스를 통해 전송하는 구조를 가지고 있다. 본 논문에서는 새롭게 설계 제작된 CAN연계형 안전진단 센서보드의 동작을 센싱 데이터와 연계하여 다양한 상황에서 그 성능을 검증함으로서 개발된 하드웨어의 유용성을 확인하였다.

• 한국자동차공학회논문집
• /
• 제19권6호
• /
• pp.30-36
• /
• 2011

The current test methods are insufficient to evaluate and ensure the safety and reliability of vehicle system for all possible dynamic situation including the worst case such as rollover, spin-out and so on. Although the known NHTSA Sine with dwell steering maneuvers are applied for the vehicle performance assessment, they aren't enough to estimate other possible worst case scenarios. Therefore, it is crucial for us to verify the various worst cases including the existing severe steering maneuvers. This paper includes useful worst case based upon the existing worst case scenarios mentioned above and worst case evaluation for vehicle dynamic controller in simulation basis and UCC HILS. The only human steering angle is selected as a design parameter here and optimized to maximize the index function to be expressed in terms of both yaw rate and side slip angle. The obtained scenarios were enough to generate the worst case to meet NHTSA worst case definition. It has been concluded that the new procedure in this paper is adequate to create other feasible worst case scenarios for a vehicle dynamic control system.

• Journal of Biosystems Engineering
• /
• 제37권6호
• /
• pp.352-358
• /
• 2012

Purpose: The inexpensive black box system was developed to acquire and save driving information, to give the slope information, and to transmit SOS and theft signal. Method: The device consists of a main micro controller to acquire and save data, a GPS sensor module, a CDMA module, a touch LCD module, a RF (Radio Frequency) ID module, a SD (Secure Digital) card module, an emergency electric power source, a theftproof circuit, and a sensing device. The sensing device consists of a 8 bit micro controller, a accelerometer to detect impulse, two slope sensors to detect roll and pitch angle and a circuit to detect operation of 6 lighting devices. Results: Test results are as follows: 1) a tractor can be start up only with an electronic key (password or RFID card), 2) theft signal was transmitted when a tractor moved without an electronic key, 3) SOS was transmitted at conditions that rollover or crash happened. 4) 5 more than per 1s data are recorded at 5 minute intervals as new file name in SD card. Conclusions: This system can be used to save travelling record, reduce accident, prevent theft and rescue life in the accidents.

• 한국자동차공학회논문집
• /
• 제16권6호
• /
• pp.1-9
• /
• 2008

The current test methods are insufficient to evaluate and ensure the safety and reliability of vehicle system for all possible dynamic situation including the worst case such as rollover, spin-out and so on. Although the known NHTSA J-turn and Fish-hook steering maneuvers are applied for the vehicle performance assessment, they aren't enough to estimate other possible worst case scenarios. Therefore, it is crucial for us to verify the various worst cases including the existing severe steering maneuvers. This paper includes the procedure to search for other useful worst case based upon the existing worst case scenarios mentioned above and its application in simulation basis. The only human steering angle is selected as a design parameter here and optimized to maximize the index function to be expressed in terms of either roll angle or yaw rate. The obtained scenarios were enough to generate the worst case to meet NHTSA worst case definition (ex.2-inch wheel lift). Additionally, as an application, the worst case steering maneuver is acquired for the vehicle to operate with a simple ESP system. It has been concluded that the new procedure in this paper is adequate to create other feasible worst case scenarios for a vehicle system both with an intelligent safety control system and without it.

• Design & Manufacturing
• /
• 제11권2호
• /
• pp.37-41
• /
• 2017

With light vehicle weight gradually becoming ever more importance due to tightened exhaust gas regulations, hot-stamping processing using boron alloyed steel is being applied more and more by major automobile OEMs since process assures both moldability and a high strength of 1.5 GPa. Although laser trimming is generally applied to the post-processing of the hot-stamped process with high strength, there have been many studies of in-die hot trimming using shear dies during the quenching of material in order to shorten processing times. As such, this study investigated the effects of the Shear rate and Shear mechanism on shear processes during the quenching process of hot-stamping material. In case of pad variable, padding force is very weak compared with shear force, so it does not affect the shear surface. In case of shear rate, the higher the shear at high temperatures and the higher the friction effect. As a result the rollover and the fracture distribution decreased, and the burnish distribution increased. Therefore, it is considered that the shear quality is guaranteed when high shear rate is applied in high temperature shear process.

• 한국전자통신학회논문지
• /
• 제13권6호
• /
• pp.1365-1372
• /
• 2018

최근 농업 사회의 고령화로 인해 농기계로 인한 안전사고가 급증하고 있다. 어떤 경우에는 부상자가 사고를 주위에 알리지 못한 채 홀로 방치되어 심각한 상황에 이를 수 있다. 경운기, 이앙기, 트랙터, 콤바인 등 농기계를 대상으로 작업 및 이동 중에 전복, 충돌, 기타 사고 등의 안전사고 발생 시 ICT 기술을 이용하여 신속하게 사고 상황을 외부에서 감지하고 전달함으로써 인명 피해를 최소화 할 수 있는 시스템이 요구되고 있다. 본 연구에서는 농기계의 충돌 및 전복 사고를 감지하고, 위험상황을 전송하는 ICT 기반의 농기계 안전사고 자동상황전파시스템을 제안한다. 제안된 시스템은 농기계 사고 발생 시 자동으로 가족, 지인, 병원 및 119로 문자 메시지를 보냄으로써 빠른 사후 조치를 통한 인명구조를 가능하게 한다.