• 한국해양공학회지
• /
• 제19권3호
• /
• pp.25-30
• /
• 2005

To predict rolling performance for a barge-type FPSO, the evaluation of correct nonlinear roll damping is critical. The square section of FPSO causes a considerable viscous damping effect. Free roll decay tests were carried out to estimate nonlinear roll damping for a barge-type FPSO, under three different conditions. The roll motion RAO was deduced from model tests in the wave condition of the wideband spectrum. In numerical calculation, the quadratic damping was considered as equivalent linear damping, using the results of free roll decay test. Tested roll performance in the JONSWAP wave spectrum was compared with numerical results. These two results shaw good agreement, in spite of the proximity of peak wave period and roll natural period.

• 해양환경안전학회지
• /
• 제21권5호
• /
• pp.538-542
• /
• 2015

선체의 횡관성모멘트는 선박의 횡운동 특성을 다루는 경우 제외될 수 없는 요소로서 그 크기의 적정성은 선체 동특성 해석의 결과와 신뢰성에 큰 영향을 미친다. 그러나 선박은 질량분포와 형상이 복잡하므로 이를 직접적인 계산을 통해 값을 구하기에는 과정이 매우 복잡하고 대상 선박의 구체적인 관련 자료를 얻기도 어렵다는 점에서 실용적으로는 선체 질량의 등가적 관성반경을 선체폭의 일정비율로 계산하는 간접적인 방법이 통용되고 있다. 한편, 어느 선체의 자유 횡운동이 나타내는 횡요 주기와 감쇠형태는 관성모멘트에 의해 영향을 받기 마련이고 따라서 이러한 응답의 결과적인 모양으로부터 역으로 해당 선박의 관성모멘트를 구하는 일반식의 도출이 가능할 것으로 유추될 수 있다. 본 연구에서는 관찰에 의한 선체의 횡요 주기는 경사각의 진폭 감쇠비에 의해서도 달라지는 관계를 해석하여 횡요 주기와 경사각 진폭 감쇠비 모두를 함수 인자로 포함하는 일반식에 의해 횡관성모멘트 크기가 구해질 수 있음을 나타내었다. 또한 이러한 일반식에 횡요 관찰 선박의 주요 제원을 적용하였을 때 나타나는 특성 그래프들을 분석한 결과 횡요주기뿐 아니라 진폭감쇠비가 함께 검토될 때 얻어지는 관성모멘트 값이 보다 정확해진다는 것을 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.644-647
• /
• 2013

The important source of noise from railways is rolling noise caused by wheel and rail vibrations induced by acoustic roughness at the wheel-rail contact. The main contributors for rolling noise are the sleepers, rail and wheels. In order to analyze and predict rolling noise, it is necessary to understand the vibrating behaviors of railway tracks, as well as the wheels. In the present paper, theoretical modelings of the railway track are reviewed in terms of the rolling noise, and they are applied for the three representative types of domestic railway tracks operated: the conventional ballasted track, KTX ballasted track and KTX concrete track. The characteristics of waves propagating along rails were investigated and compared between the tracks. The tracks were modeled as discretely supported Timoshenko beams and compared in terms of the averaged squared amplitude of velocity which is directly related to the sound radiation from the rails.

• 대한조선학회논문집
• /
• 제56권6호
• /
• pp.550-558
• /
• 2019

The roll motion of a general vessel, which is more influenced by resonance as compared to other motions, adversely affects the passenger and hull. Therefore, reducing the roll motion through an anti-rolling system is critical, and most ships use various devices such as anti-rolling tanks, bilge keels, and fin stabilizers to accomplish this. In this study, a simplified model is developed for the application of an anti-rolling device for unmanned semi-submersible vessels. The applied anti-rolling device is installed on the stern and stem of a ship using a pair of servo motors with added weight, and the motor is controlled through the Arduino. The moment of the motor is designed and implemented based on a mathematical model such that it is calculated through the restoring force according to the heel angle of the ship. The performance of the proposed system was verified by utilizing the roll damping coefficient calculated by the free-roll decay test and logarithmic decrement method and was validated by a towing tank test. The system is expected to be used for unmanned vessels to perform sustainable missions.

• Structural Engineering and Mechanics
• /
• 제48권4호
• /
• pp.455-466
• /
• 2013

In recent years, many countries have added railway noise to the issues covered by noise regulations. It is known that the rail is the dominant source of rolling noise at frequency range of 500Hz-2000Hz for the conventional speeds (<160km/h). One of the effective ways to reduce noise from railway track is using a rail vibration absorber. To study the acoustic performance of rail absorber, the decay rates of vibration have long been used by researcher. In this paper, A FE model of a periodic supported rail with infinite element in ABAQUS is developed to study the acoustic performance of the rail absorber. To compute the decay rates, acceleration responses along the rail transferred to MATLAB to obtain response levels in frequency domain and then by processing the response levels, the decay rates obtained for each1/3octav band. Continous rail absorber is represented by a steel layer and an elastomer layer. The decay rates for conventional rail and rail with one-side absorber and also, the rail with two side absorber are obtained and compared. Then, to improve the system of rail absorber, a steel plate with elastomer layer is added to bottom of the rail foot. The vertical decay rate results show that the decay rate of rail vibration along the track is significantly increased around the tuned frequency of the absorber and thus the rail vibration energy is substantially reduced in the corresponding frequency region and also effective in rail noise reduction.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.183-187
• /
• 2004

To predict rolling performance for a barge-type FPSO, the evaluation of correct nonlinear roll damping is critical. The squall section of FPSO causes a fair amount of viscous damping effect. Free roll decoy tests were conducted to estimate nonlinear roll damping for a barge-typ FPSO of three different loading conditions. The roll motion RAO was deduced by model tests in the wave condition of wideband spectrum. In numerical calculation, the quadratic damping was considered as equivalent linear damping using the results of free roll decay test. Tested roll performance in JONSWAP wave spectrum was compared with numerical results. These two results show good agreement, in spite of proximity in peak wave period and roll natural period.

• 한국철도학회논문집
• /
• 제16권2호
• /
• pp.85-92
• /
• 2013

철도 전동 소음은 철도에서 발생하는 대표적인 소음으로서 차륜과 레일의 음향 조도에 의해 유기된다. 철도 전동 소음의 주요 소음원으로는 침목, 레일 그리고 차륜을 들 수 있다. 따라서 철도의 전동 소음을 해석하기 위해서는 차륜의 진동 특성과 함께 궤도의 진동을 해석하고 그 특성을 이해하는 작업이 수행되어야 한다. 본 논문에서는 전동 소음의 관점에서 레일의 진동을 해석하기 위한 이론적 궤도 모델링에 대해 기술하고, 국내의 대표적인 세 가지 철도 궤도에 대해 진동 해석을 수행하였다. 해석에 사용한 궤도로는 기존선 자갈 도상 궤도, KTX 자갈 도상 궤도, KTX 콘크리트 궤도를 선정하였으며, 각 궤도 별로 레일을 따라 진행하는 파동의 전파 특성을 해석하고 그 결과를 비교하였다. 해석 시 궤도는 이산 지지를 가진 Timoshenko 보로 모델링하였으며, 레일의 평균 진동 속도를 이용해 세 궤도 레일의 방사 소음 특성을 간접 비교하였다.

• 한국소음진동공학회논문집
• /
• 제23권7호
• /
• pp.605-616
• /
• 2013

An important source of noise from railways is rolling noise caused by wheel and rail vibrations induced by acoustic roughness at the wheel-rail contact. In the present paper, characteristics of rail vibration and radiated sound power from concrete slab tracks for domestic high speed train(KTX) is investigated by means of a numerical method. The waveguide finite element and boundary element are combined and applied for this analysis. The concrete slab track is modelled simply with a rail and rail pad regarding the concrete slab as a rigid ground. The wave types which contribute significantly to the rail vibration and radiated noise are identified in terms of the mobility and decay rates. In addition, the effect of the rail pad stiffness on the radiated power is examined for two different rail pad stiffnesses.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.30-35
• /
• 2004

Several roll motion reduction devices are reviewed and suggested for the application in FPSO. The firstly suggested solution is the shape of the bilge. The next is a bilge keel. The last suggestion is the ART (anti-rolling tank). Typical U-tube type ART is designed for a FPSO and examined extensively by model experiment. The model section was made of transparent acryl. Free decay test, forced oscillation test and wave test were carried out at a two-dimensional wave flume. U-tube type ART is effective only when the natural periods of ART and ship are same. Therefore, the divided U-tube type ART with split plate is suggested for the reduction of the roll motion of a FPSO over the wide range of the roll period.

• International Journal of Ocean Engineering and Technology Speciallssue:Selected Papers
• /
• 제6권1호
• /
• pp.1-6
• /
• 2003

This study presents the results of series of studies, which are mainly devoted to the application of wavelet transforms to various problems in ocean engineering. Both continuous and discrete wavelet transforms were used. These studies attempted to solve detection of wave directionality, detection of wave profile, and decoupling of the rolling component from free roll decay tests. The results of these analysis, using wavelet transform, demonstrated that the wavelet transform can be a useful tool in analyzing many problems in the filed of ocean engineering.