• 연구논문집
• /
• 통권22호
• /
• pp.75-83
• /
• 1992

The beating motion of a high speed shuttleless loom is driven by cams. Two cams become one system and their shaft laid across each other. Moreover, the shape of the cams is very complex and requires high precision for successful weft insertion and good interlacing with warp yarn. The iterative contact method is developed for use in design and analysis of the driving mechanism of a disk type cam with oscillating roller follower. The optimum design is performed by utilizing a CAD program, DISKCAM. The 8th order polynomial is selected to interpolate the desired shape trajectory of the cam, the optimal shape of the cams is defined based on the demension of the follower. The kinematic motion of the beating cam mechanism is investigated. The phase angle is determined to achive harmonious cam motions

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.469-472
• /
• 2008

This research suggest one-body type scrapped styrofoam crusher with sprayed air (or water), which at present separately composed of dust eliminator, air supplier and crusher. Air (or water) that supplied from compressor injected to rotating twin roller through axis hole, and sprayed out of fine hole on the surface. The crusher that manufactured with sprayed air (or water) can make high-quality primary styrofoam removed pollution and dust. In case of mixed sprayed air and water, clean degree of crushed styrofoam was higher than single sprayed air. This could be contributed to reduce environmental pollution, cost and space in standpoint of recycling scrapped styrofoam.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.705-706
• /
• 2002

Hemodynamics of the TPLS(Twin Pulse Life Support System) is numerically investigated to delineate the possibility of hemolysis in blood. Computational method employing finite element algorithm is utilized to solve the blood flow of the sac squeezed by moving actuator. We assume that the blood flow interacts with the sac material which is activated by the rigid body motion of the actuator. Valve dynamics at the ends of the sac is simplified as on/off type motion. We compute the transient viscous flow in the two-dimensional geometry of the blood sac. Incompressible laminar flow is simulated on the assumption of Newtonian fluid. Blood velocity has a step gradient near the throat of the sac formed by the moving actuator. According to the decrease of the gap size of blood passage, the magnitude of shear stress in the blood is dramatically increased. Numerical solutions show that the maximum value of shear stress in the blood flow in TPLS is relatively smaller than that of the roller type ECLS.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.41-42
• /
• 2012

High temperature / high pressure spray equipment using a conventional method, unlike spray polyurea adjustable pot life and yellowing caused by UV light and chemicals do not occur, or discoloration of Self-Leveling Type of rugged hand-polyurea resin for technology development is underway. This new concept of polyurea resin roller, brush, airless spray, and they installed easily using the unfamiliar labor, and curing time of approximately four hours to gain control of the glass because it is Pot. Construction, but does not like the spray polyurea resin, compared to the existing degradation of the adhesion strength is concerned. In this study, Self-Leveling Type Manual of polyurea resin adhesion strength of target deterioration Let's minimize problems by reviewing existing domestic and infrastructure long-term durability for long life of the facility is to obtain.

• 정보저장시스템학회:학술대회논문집
• /
• 정보저장시스템학회 2005년도 추계학술대회 논문집
• /
• pp.75-80
• /
• 2005

Study for toner adhesion is known as an important role in electrophotography. In this research, a centrifugal detachment method was used to measure the adhesion force of several hundred particles simultaneously and to determine its sensitivity to particle size. For uncharged toner particles, we estimated the van der Waals force based on the centrifugal farce experiments. Then for charged toner particles, the centrifugal force experiments were carried out. The difference between the results for charged toner particles and the results for uncharged toner particles was compared with the image force calculated from a model which assumed that the toner charge was located at the center of the particle. In the calculations, experimental data obtained by E-SPART (Electrical- Single Particle Aerodynamic Relaxation Time) analyzer were used. The adhesion force of micro-sized toner particles deposited on the DR surface was found to be approximately 1${\~}$3 nN.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 Asia Navigation Conference
• /
• pp.115-120
• /
• 2006

The rail clamp is the device to prevent the crane slips along rails from the wind blast as well as to locate a container crane in the set position in operating mode. In this study we conduct the research for the sliding distance of rail clamp and the proper position of supporter with respect to the wedge angle in the wedge type rail clamp. The sliding distance to display the clamping force of the jaw pad corresponding to the design wind speed criteria is determined by the total displacement of the rail clamp at the roller center and the wedge angle. And the supporter is the device to prevent the overload which is applied on each part of the rail clamp by wind speed increment, because a clamping force is generated by the sliding of the wedge due to the wind. Accordingly the position of the supporter to prevent the overload is determined by analyzing the forces applied to the rail clamp. In order to analyze the sliding distance and the proper position of supporter with respect to the wedge angle as the wind speed is 40m/s, 5-kinds of wedge angles, such as 2, 4, 6, 8, $10^{\circ}$, were adopted as the design parameter.

• 정보저장시스템학회논문집
• /
• 제2권2호
• /
• pp.105-110
• /
• 2006

Study for toner adhesion is 3non as an important role in electrophotography. In this research, a centrifugal detachment method was used to measure the adhesion force of several hundred particles simultaneously and to determine its sensitivity to particle size. For uncharged toner particles, we estimated the van der Waals force based on the centrifugal force experiments. Then for charged toner particles, the centrifugal force experiments were carried out. The difference between the results for charged toner particles and the results for uncharged toner particles was compared with the image force calculated from a model which assumed that the toner charge was located at the center of the particle. In the calculations, experimental data obtained by E-SPART (Electrical-Single Particle Aerodynamic Relaxation Time) analyzer were used. The adhesion force of micro-sized toner particles deposited on the DR surface was found to be approximately $1{\sim}3$ nN.

• 한국지반환경공학회 논문집
• /
• 제18권3호
• /
• pp.5-14
• /
• 2017

극한지 동결 지반에서 구조물의 설계 및 시공이 진행됨에 따라, 안정성 평가를 위해 동결토의 강도 특성에 대한 실험적 연구가 필수적이다. 본 연구의 목적은 전단 상자 시스템에 따른 동결토의 강도를 평가하는 것으로, 이를 위하여 보편적으로 사용되는 기존 직접전단 시스템(Type-1), 상부 전단 상자 위쪽에 롤러를 설치한 시스템(Type-2), 그리고 상부 전단 상자를 하부 전단 상자와 분리되도록 기둥으로 고정한 시스템(Type-3)을 제작하였다. 모든 시스템에는 모래, 실트, 그리고 증류수를 동일한 비율로 혼합한 시료를 이용하여 조성하였으며, 냉동 챔버 내에서 $-5^{\circ}C$까지 동결된 후 연직 응력 5, 10, 25 그리고 50kPa을 가하며 직접전단실험을 수행하였다. 실험 결과, Type-1은 전단 이동에 따라 상부 전단 상자가 회전(rotation)하여 하부 전단 상자와 접촉하는 문제가 발생했다. 상부 전단 상자의 회전을 롤러로 방지한 Type-2의 경우, 회전을 막는 힘이 전단강도에 추가되어 강도가 과대 평가되었다. Type-3의 경우, 동결 시료만의 전단강도가 평가되었으며, 최대전단강도 발현 시점과 수직변위가 증가하기 시작하는 시점이 유사하게 나타났다. 또한, Type-3의 최대전단강도와 잔류전단강도의 내부마찰각과 점착력은 롤러의 영향이 제거되어 Type-2보다 작게 나타났다. 본 연구는 동결토와 같이 강도가 큰 시료의 경우 Type-3과 같이 개선된 전단 상자 시스템을 이용하여 동결토만의 강도를 평가할 수 있음을 보여준다.

• 한국항해항만학회지
• /
• 제29권8호
• /
• pp.735-740
• /
• 2005

항만에서 작동중인 컨테이너 크레인에 갑작스러운 돌풍에 의해 크레인이 밀리는 현상을 방지하기 위한 안전장치로 레일 클램프가 적용되고 있다. 본 연구에서는 이러한 레일 클램프 중에서 특히 레일의 손상과 레일 클램프 수명을 향상시킬 수 있는 쐐기형 레일 클램프을 제작하기 위한 기초 설계에 관한 연구를 수행하였다. 특히, 조의 회전을 방지하고 적절한 가압력을 발휘할 수 있는 쐐기각을 설정하기 위해, 우선조의 설계 치수와 회전력의 관계에 대한 하중분석을 수행하고, 여기에서 최대 쐐기각을 도출하고, 이후 수치 해석을 통한 강성도 분석을 통하여 최소 쐐기각 $6^{\circ}$를 제안한다. 또한, 제작된 레일 클램프를 통한 실험으로 검증하였다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2016년도 학술발표회
• /
• pp.65-65
• /
• 2016

위어나 낙차공 같은 수공구조물 직하류부에서는 다양한 형태의 흐름조건이 발생한다. 낙차공 하류에서 발생하는 독특한 흐름형태 중 하나는 정상파형도수를 갖는 파형흐름이다. 이 연구에서는강 등(2010)이 수리실험을 수행한 바 있는 계단형 위어 하류부에서의 형성되는 파형흐름을 3차원 수치해석을 수행한다. 위어 구조물 위를 통과하는 난류흐름을 해석하기 위해서 Spalart-Allamaras 1방정식 모형을 이용한 URANS 수치모의와 DES (detached eddy simulation)을 실시하였다. 위어 주변에서의 자유수면 변동, 파상도수, 자유수면에서의 와류 그리고 바닥부근에서의 재순환 영역의 형상과 크기, 선정된 종방향 위치들에서의 흐름방향유속분포 등의 항으로 수치해석결과를 실험값과 비교하여 수치모의의 적절성과 난류모델들의 성능을 평가한다.