• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.93-95
• /
• 2007

Studies on ski-end shape control at the top end of rolling plate in heavy thick plate mill by using FEM analysis and measuring system have been performed. Plate shape behaviour at the top-end on rolling by the two different methods in finishing rolling process has been observed. One is to minimize the height of ski-end by using pass line based on the relational model between shape factor and pick-up and the other one is to prevent turn down problem caused by the impact between table roller and down bended plate on rolling by using roll speed difference. To minimize the height of ski-end, the prediction models based on the FEM analysis and measuring data was developed. The control method of ski - end shape on finishing rolling process was applied in actual mill and the height of ski-end was reduced by about 50% compared with conventional operation.

• 한국운동역학회지
• /
• 제21권3호
• /
• pp.259-268
• /
• 2011

This study aimed to examine the kinematic characteristics of the national elite cross-country skiers' double poling technique and to provide the quantitative data for better performance. Four male elite cross-country roller skiers skied maximum velocity with Double Pole technique. The cycle characteristics with angles of elbow, hip, and knee joint were analyzed. The results showed that CM velocity of the body was increased with the third cycle, the cycle time and length were also increased. The poling time and recovery time rate showed with 32.79%, 67.44% respectively. The joint angles with elbow, hip and knee were $106^{\circ}$, $133.14^{\circ}$ $156.87^{\circ}$ at pole in event, $158.94^{\circ}$, $65.7^{\circ}$, $140.19^{\circ}$ at pole out event. Elite skiers should decrease double poling time rate and increase recovery time rate in order to improve the double poling performance. The cycle length and velocity of the double poling should be increased for the better performance. The elbow angle should be minimized at pole in event with maximum extension until pole out event. The hip and knee angles should be increased for the recovery phase.

• 한국운동역학회지
• /
• 제22권1호
• /
• pp.95-104
• /
• 2012

The purpose of this study targeted to national cross-country skiers representatives was to implement hypothetical experiment on their patterns of the movements and analysis on kinematic variables occurred while double polling was conducted between starting and finishing phase of 56 meters. Furthermore, it aimed to provide a set of quantitative data to illustrate how to improve one's skill and performance of sprint. In our experiments, we conducted 3-dimension analysis of cycle characteristics, joint angle(hip, knee and elbow), and pole angle. The results showed that at the starting phase, the players did not show a significant difference in attributes of time and distance. In heat 1 where elbow angle and polling starts, the pole angle was noticeably high in heat 1. At the finishing phase, there was a considerable distinction with a high frequency in performing a short polling time and high speed in heat 3. The players showed large extension between the flexion and of the hip angle which indicates high contribution given from the movement of lower body(hip, knee).