• Steel and Composite Structures
• /
• v.26 no.3
• /
• pp.347-360
• /
• 2018

The aim of this paper is to evaluate the accuracy and reliability of the available bond-slip laws which are being used for the numerical modeling of Fiber Reinforced Polymer (FRP)/concrete interfaces. For this purpose, a set of Reinforced Concrete (RC) beams retrofitted with external FRP were modeled using the 3D nonlinear Finite Element (FE) approach. All considered RC beams have been previously tested and the corresponding experimental data are available in the literature. The failure modes of these beams are concrete crushing, steel yielding and FRP debonding. Through comparison of the numerical and experimental results, the effectiveness of each FRP/concrete bond-slip model for the prediction of the structural behavior of externally retrofitted RC beams is assessed. The sensitivity of the numerical results against different modeling considerations of the concrete constitutive behavior and bond-slip laws has also been evaluated. The results show that the maximum allowable stress of FRP/concrete interface has an important role in the accurate prediction of the FRP debonding failure.

• Journal of the Korean School Mathematics Society
• /
• v.17 no.4
• /
• pp.657-677
• /
• 2014

The present qualitative case study explored the ways in which three middle school students constructed and refined their mathematical models and modeling processes, and factors that had influenced such refinement. The results suggest that students' modeling processes are non-sequential in that the participant students reformulated their initial problem from the real-world problem situation and revised the model when they could not get a satisfactory solution or the acquired solution did not make sense. Moreover, the students' model refinement processes were affected by the following four elements: the types of real-word problem situations, students' metacognitive thinking, communications between teachers and peers, and the role of teachers.

• Nuclear Engineering and Technology
• /
• v.33 no.2
• /
• pp.241-253
• /
• 2001

Under severe accidents, the pressure and temperature response has an important role for the integrity of a nuclear power plant containment. The history of the pressure and temperature is characterized by the amount and state of steam/air mixture in a containment. Recently, the heat transfer rate to the structure surface is supposed to be increased by the wavy interface formed on condensate film. However, in the calculation by using CONTAIN code, the condensation heat transfer on a containment wall is calculated by assuming the smooth interface and has a tendency to be underestimated for safety. In order to obtain the best- estimate heat transfer calculation, we investigated the condensation heat transfer model in CONTAIN 1.2 code and adopted the new forced convection correlation which is considering wavy interface. By using the film tracking model in CONTAIN 1.2 code, the condensate film is treated to consider the effect of wavy interface. And also, it was carried out to investigate the effect of the different cell modelings - 5-cell and 10-cell modeling - for KNGR(Korean Next Generation Reactor) containment phenomena during a severe accident. The effect of wavy interface on condensate film appears to cause the decrease of peak temperature and pressure response . In order to obtain more adequate results, the proper cell modeling was required to consider the proper flow of steam/air mixture.

• Korean Journal of Computational Design and Engineering
• /
• v.22 no.1
• /
• pp.37-43
• /
• 2017

3D printing techniques can be used in various application fields and many researches have been reported. FDM (Fused Deposition modeling) can make multi-material or multi-color models with the simultaneous use of two or more filaments. In a dual-nozzle FDM printers, while the active nozzle is working, the remaining nozzle will be idle. The remaining molten resins inside an idle nozzle can ooze out unwantedly. The spill over from the resting nozzle produces unwanted remaining on the fabricated product. In this research, we suggest a method for optimizing building position of a model to minimize the unwanted spill-over that could possibly contaminate the final product. The method is based on minimizing the two intersection volumes. The first intersection volume is obtained by intersecting the volume defined by the first material and the Minkowski sum between the volume of the first material and the vector obtained by subtracting the center point of the first nozzle from the center point of the second nozzle. The second intersection volume can be obtained by reversing the role of the first and second volumes and nozzles. Some results obtained from the implementation using the Parasolid (Siemens) geometric modeling kernel is presented.

• Korean Journal of Computational Design and Engineering
• /
• v.22 no.2
• /
• pp.202-214
• /
• 2017

The augmented visualization of analysis results can play an import role as a post-processing tool for the modeling & simulation (M&S) technology. In particular, it is essential to develop such an M&S tool which can run on various multi-devices. This paper presents an augmented reality (AR) approach to visualizing and interacting with M&S post-processing results through mobile devices. The proposed approach imports M&S data, extracts analysis information, and converts the extracted information into the one used for AR-based visualization. Finally, the result can be displayed on the mobile device through an AR marker tracking and a shader-based realistic rendering. In particular, the proposed method can superimpose AR-based realistic scenes onto physical objects such as 3D printing-based physical prototypes in a seamless manner, which can provide more immersive visualization and natural interaction of M&S results than conventional VR or AR-based approaches. A user study has been performed to analyze the qualitative usability. Implementation results will also be given to show the advantage and effectiveness of the proposed approach.

• Journal of the Korean Society of Fashion and Beauty
• /
• v.2 no.3 s.3
• /
• pp.60-67
• /
• 2004

Representing all the parts of human body visible to fit into the script, it can be told that real make-up has been done. Based on the point of view. it will be different from others. To become the beautiful, beauty make-up has to be done, however, to be someone described in the script or any other factions after analyzing characters of being represented, special make-up fits into that category. In the special make-up, there are two different pins: one is 2 dimension make-up which is describing images using dots, lines and colors and other is 3 dimension which will include necessary shapes to figure. Even though there seems to be different between modern technologies and handy work, since accurate measures and graphics have to be used to make perfect character describes in the script, more investments and studies than before have to be made. Real attraction of 3 dimension make-up is building up the images and shapes using unseen abstract images having analyzing characters. It will be decided in the working process called modeling. As having distinguished this part from other make-ups as named prosthetics make-up, proposing means and measures of prosthetics make-up will actually help the others who are studying make-up.

• Structural Engineering and Mechanics
• /
• v.69 no.3
• /
• pp.243-255
• /
• 2019

Utilization of fiber beam-column element has gained considerable attention in recent years due mainly to its ability to model distributed plasticity over the length of the element through a number of integration points. However, the relatively high sensitivity of the method to modeling parameters as well as material behavior models can pose a significant challenge. Residual drift is one of the seismic demands which is highly sensitive to modeling parameters and material behavior models. Permanent deformations play a prominent role in the post-earthquake evaluation of serviceability of bridges affected by a near-fault ground shaking. In this research, the influence of distributed plasticity modeling parameters using both force-based and displacement-based fiber elements in the prediction of internal forces obtained from the nonlinear static analysis is studied. Having chosen suitable type and size of elements and number of integration points, the authors take the next step by investigating the influence of material behavioral model employed for the prediction of permanent deformations in the nonlinear dynamic analysis. The result shows that the choice of element type and size, number of integration points, modification of cyclic concrete behavior model and reloading strain of concrete significantly influence the fidelity of fiber element method for the prediction of permanent deformations.

• Clinics in Shoulder and Elbow
• /
• v.26 no.2
• /
• pp.126-130
• /
• 2023

Background: Arm swing plays a role in gait by accommodating forward movement through trunk balance. This study evaluates the biomechanical characteristics of arm swing during gait. Methods: The study performed computational musculoskeletal modeling based on motion tracking in 15 participants without musculoskeletal or gait disorder. A three-dimensional (3D) motion tracking system using three Azure Kinect (Microsoft) modules was used to obtain information in the 3D location of shoulder and elbow joints. Computational modeling using AnyBody Modeling System was performed to calculate the joint moment and range of motion (ROM) during arm swing. Results: Mean ROM of the dominant elbow was 29.7°±10.2° and 14.2°±3.2° in flexion-extension and pronation-supination, respectively. Mean joint moment of the dominant elbow was 56.4±12.7 Nm, 25.6±5.2 Nm, and 19.8±4.6 Nm in flexion-extension, rotation, and abduction-adduction, respectively. Conclusions: The elbow bears the load created by gravity and muscle contracture in dynamic arm swing movement.

• Asian Journal for Public Opinion Research
• /
• v.10 no.1
• /
• pp.4-22
• /
• 2022

The purpose of this study is to explore the structure of social discourse on aging in Korea by analyzing newspaper articles on aging. The analysis is composed of three steps: first, data collection and preprocessing; second, identifying the latent topics; and third, observing yearly dynamics of topics. In total, 1,472 newspaper articles that included the word "aging" within the title were collected from 10 major newspapers between 2006 and 2019. The underlying topic structure was analyzed using Latent Dirichlet Allocation (LDA), a topic modeling method widely adopted by text mining academics and researchers. Seven latent topics were generated from the LDA model, defined as social issues, death, private insurance, economic growth, national debt, labor market innovation, and income security. The topic loadings demonstrated a clear increase in public interest on topics such as national debt and labor market innovation in recent years. This study concludes that media discourse on aging has shifted towards more productivity and efficiency related issues, requiring older people to be productive citizens. Such subjectivation connotes a decreased role of the government and society by shifting the responsibility to individuals not being able to adapt successfully as productive citizens within the labor market.

• Human Ecology Research
• /
• v.61 no.3
• /
• pp.475-492
• /
• 2023

This study investigated player responses to microtransactions in freemium Massively multiplayer online roleplaying games (MMORPG), specifically focusing on the game LostArk using English language review data. To this end, structural topic modeling was employed and the following six microtransaction-relevant topics were identified: microtransactions, developer issues, real money trade (RMT), random number generator (RNG) upgrade system, game content, and collectibles & adventure. The first four topics were classified as being "not recommended". However, the proportions of microtransaction-related topics were relatively lower than the other topics. Additionally, this study did not extract keywords related to unfairness and unethical issues in previous microtransaction research. The last two topics, game content, and collectibles & adventure were "recommended" topics, indicating positive functions of microtransactions such as enhancing the game experience by purchasing virtual items. Moreover, it was found that players who do not engage in microtransactions can still be satisfied through continuous game content updates. Additionally, an examination of the interaction effect between time and recommendation status revealed that while the frequency with which the six microtransaction-related topics were mentioned increased over time in the reviews, the ratio of recommendations to non-recommendations varied differently. This study contributes to game-related research by revealing players' authentic opinions on microtransactions in freemium MMORPGs, thereby providing practical implications for game companies.