• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.383-383
• /
• 2011

Generally, field emitters can be categorized into two types according to the emitter shape, one is a planar field emitter and the other is a point emitter. The planar field emitter is used for displays, flat lamps and signage boards. On the other hands, the point field emitter is expected to play a significant role in x-ray sources and electron beam sources. Such applications of the point field emitters, especially, need large emission current and high emission stability with a small electron beam size. A few reports announced point emitters made by carbon nanotubes (CNTs). However, they still have suffered from poor reproducibility and low emission current. Here, we demonstrated high performance CNT point emitters by attaching CNTs onto graphite rod. Graphite rod exhibited good electrical conductivity and chemical stability. In this method, the shape of the point emitter could be easily controlled by changing the length and diameter of the graphite rod. The CNT point emitter showed emission current over 1 mA at an applied electric field of 1.4 V/${\mu}m$. We consider that the stable emission performance is attributed to the stable contact between CNTs and graphite rod.

• 한국방사선학회논문지
• /
• 제12권5호
• /
• pp.575-582
• /
• 2018

PET와 PET/CT의 검사 영상품질관리를 위해서는 F-18 방사능측정기의 정도관리가 필요하다. Ge-68/Ga-68 Rod Sources을 선원을 이용하여 의료기관에서 사용하고 있는 5종류의 방사능측정기의 방사능 측정의 정확도와 정밀도를 확인하였다. CRC-15R, CRC-15 PET, CRC-712M, CRC-15 베타 및 CRC-25PET에 대한 측정값과 기준값 사이의 방사능 양에 따른 상관관계는 0.99999 (P <0.0001)로 매우 높은 선형성을 보였다. 정확도 테스트에서 CRC-15R, CRC-15 PET, CRC-712M, CRC-15 베타 및 CRC-25PET 모델은 각각 -3.232 %, -1.342 %, -2.815 %, -2.913 % 및 -3.089 %를 이었다. 국내와 국제기준인 정확도 ${\pm}10%$, 정밀도 ${\pm}5%$ 이내로 기준을 만족하였고 반감기가 짧은 F-18에 비하여 경제성 있고 비교적 긴 기간 동안 안정적으로 정도관리가 가능하다는 것을 확인하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.171-175
• /
• 2010

Various soil characteristics for safe construction is necessary to understand the tests using the samples collected, and head in place an energy evaluation is conducted to evaluate the ground. In-Situ testing ground, Rod length and around the intrusive when the energy loss due to friction has been measured only in the head. Abstract The purpose of this agreement when increasing contract area of Rod agreement to transform the energy attenuation and the attenuation at the energy being delivered to evaluate. To this end, the same material used in the field test, laboratory test to apply Rod diameter and length have been considered, designed to perform the experiment was to use the Rod. Energy that raised at head of Rod, was increased and decreased by contracting type. The energy difference occurs in the head with the tip that shows the energy rating may be required at the tip is showing. Abstract The energy evaluation for the Rod field test to be at the basic sources and will be able to calculate the trusted information are measured from the tip.

• 제어로봇시스템학회논문지
• /
• 제6권12호
• /
• pp.1106-1112
• /
• 2000

In this paper, we present a vision system which measures the cross-section of a hot wire-rod in the steel plant. We developed a mobile vision system capable of accurate measurement, which is strong to vibration and jolt when moving. Our system uses green laser light sources and CCD cameras as a sensor, where laser sheet beams form a cross-section contour on the surface of the hot wire-rod and the reflected light from the wire-rode is imaged on the CCD cameras. We use four lasers and four cameras to obtain the image with the complete cross-section contour without an occlusion region. We also perform camera calibrations to obtain each cameras physical parameters by using a single calibration pattern sheet. In our measuring algorithm, distorted four-camera images are corrected by using the camera calibration information and added to generate an image with the complete cross-section contour of the wire-rod. Then, from this image, the cross-section contour of the wire-rod is extracted by preprocessing and segmentation, and its height, width and area are measured.

• Nuclear Engineering and Technology
• /
• 제29권3호
• /
• pp.181-185
• /
• 1997

The ion sources for induction linac driven heavy ion fusion were fabricated and their omittance characteristics were investigated. For to kinds of ion sources, i. e. a carbon vacuum arc ion source and a cusp field rf ion source, the emittance was measured with a double slit beam scanner. The required normalized omittance of an ion source for heavy ion fusion is 10$^{-7}$ - 5$\times$10$^{-7}$ $\pi$ m-rod, and the measured emittances of the ion beams from carbon vacuum arc ion source and cusp field rf ion source (Ne$^{+}$) were 2$\times$10$^{-6}$ $\pi$ m-rad and 4$\times$10$^{-7}$ $\pi$ m-rad, respectively.y.

• 한국연초학회지
• /
• 제22권2호
• /
• pp.151-156
• /
• 2000

The variability of a ventilated filter cigarette depends on the details of its construction and on the variabilities of its components. Variations in filter ventilation arise from many sources, including variations in tobacco rod pressure drop, filter tip pressure drop, tipping paper permeability, and plugwrap permeability. To reduce the filter ventilation variability, the variability of filter ventilation levels in ventilated cigarettes is studied by Monte Carlo Analysis. For each trials a value is selected for tobacco rod pressure drop, filter tip pressure drop, tipping paper permeability, and plugwrap permeability. These values are selected randomly from a normal distribution based on the target and coefficient of variation for each input variable. The results of this analysis for filter ventilation variation suggest that the variations of filter ventilation are dependent on the details of cigarette designs studied and reducing the variability of any cigarette component will reduce filter ventilation variability. For typical cigarettes, variation in the permeability of tipping paper is usually the most significant contributor to filter ventilation variability. Results of a Monte Carlo Analysis could provide both general insights and specific practical guidance about the design of ventilated filter cigarettes.

• Journal of Microbiology and Biotechnology
• /
• 제3권2호
• /
• pp.108-114
• /
• 1993

A new strain of acidophilic, acetogenic bacterium, Acetobacter sp. strain HA was isolated by selective enrichment from the traditionally fermented rice wine vinegar in Korea. It was a gram-negative, non-motile short rod and oxidized acetate and lactate. The optimal temperature and pH for growth were $28^{\circ}C$ and 4.0, respectively. The strain HA differed from other Acetobacter species by growing well on methanol, xylitol, inositol, dulcitol, D-xylose, L-arabinose, and D-mannose as sole sources of carbon and energy. The isolated strain HA did not produce $\gamma$-pyrones from glucose and did not produce ketone bodies from glycerol. The quinone system used in this study was an ubiquinone-9 isoprene unit. The guanine-plus-cytosine content of the DNA was 50.7 mol%, and the major cellular fatty acids were $C_{18:1} and C_{16:0}$.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 추계학술발표회논문집(1)
• /
• pp.79-84
• /
• 1996

The robust controller for the nuclear reactor power control system is designed. The reactor model is set up by use of the point kinetics equations and the singly lumped energy balance equations. Since the model is different from the actual plant, the controller which makes the system robust is necessary. The perturbation of the actual plant is investigated with respect to several possible sources of uncertainty. Then the overall system is configured into the two port model and the $H_{\infty}$ controller is designed. The loop shaping and the permissible control rod speed are considered as the design constraints. The designed $H_{\infty}$ controller provides the sufficient margins for the robustness, and the system output as well as the control input satisfy their relevant requirements.

• Journal of Microbiology and Biotechnology
• /
• 제10권5호
• /
• pp.724-727
• /
• 2000

A Phenanthrene-degrading bacterium, Strain 1-21 was isolated from oil-contaminated soil. This strain was a Gram-negative, aerobic, and rod-shaped bacterium, and exhibited a 99% sequence similarity of 16S rDNA to that of Sphingomonas subarctica. The major cellular fatty acid was a summed feature 7(18:1 w7c, 18:1 w9t, 18:1 s12t), which is a characteristic of the Sphingomonas species. When 200 and 1,000 ppm of phenanthrene was added as the sole carbon source, Strain 1-21 degraded 98% and 67% after 10 days of incubation, respectively. Futhermore, this strain was also able to utilized naphthalene and fluorene as sole carbon and energy sources.

• 한국균학회지
• /
• 제27권1호통권88호
• /
• pp.1-9
• /
• 1999

느타리버섯 8품종의 균사생장은 $25{\sim}30^{\circ}C$의 온도 범위와 $5.5{\sim}6.5$의 pH 범위에서 가장 우수하였다. 영양원의 선발시험에서 탄소원으로서는 황백당, 밀가루 및 옥수수가루가, 그리고 질소원으로서는 대두분이 공시균주의 균사생장이 가장 우수하였다. 농업적으로 이용성이 우수한 황백당 3%, 대두분 0.3%, 인산칼륨 0.05%, 황산마그네슘 0.05%를 배지 조성으로 하는 농업용 액체배지를 선발하였다. 삼각플라스크 배양에서는 250 ml의 erlenmeyer flask에서 보다는 250ml의 shake flask에서 직경 6 mm의 균사절편을 2개 접종하여 배양액량 100ml에서 배양했을 때 공시균주의 균사체 생산이 우수하였다. 그리고 erlenmeyer flask에서 배양방법을 달리하여 느타리버섯의 균사를 배양하였을 때, $45^{\circ}$ 경사배양한 처리구에서 균사체 생산이 가장 우수하였으며, 길이 $50mm{\times}$ 직경 10mm의 유리막대를 넣고 배양한 처리구에서는 균체량이 가장 적었지만 펄프형의 균사생육을 유도할 수 있었다.