• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.629-640
• /
• 2008

South anchorage(AN1, Myodo side) of supension bridge between Myodo and Gwangyang is designed as rock anchorage with 36m anchor length using the resistance of rock mass in Myodo. Checking the overall stability of the anchorage, we considered rock joints, bedding planes, fault zones and condition of rock structure in situ by analysis results for photo-lineaments, aerial photograph interpretation and drill-hole logs are considered. This anchorage consists of an access shaft, adit, and the upper and lower concrete bearing plate to introduce pre-stressing force into rock mass.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.14-25
• /
• 2010

The Yi Sun-Sin grand bridge is the suspension bridge which connects Myodo and Gwangyang. It is over the main navigation channel of Gwangyang Harbor. South anchorage(AN1, Myodo side) of the bridge is designed as rock anchored type. It sustains using the resistance of the underground rock's mass in Myodo. As this type of anchorage can minimize the exposure of the structure, It is economically efficient and environmentally friendly. North anchorage (AN2, Gwangyang side) is designed as the gravity type. This anchorage is 68 meters in diameter and use its own weight to support. Instead of normal rectangular diaphragm wall, the circular shape diaphragm wall is adopted to the north anchorage. It doesn't need to use internal temporary facilities, so it can significantly improve the constructability of the structure.

• Geomechanics and Engineering
• /
• 제11권6호
• /
• pp.787-803
• /
• 2016

DDARF (Discontinuous Deformation Analysis for Rock Failure) is a numerical algorithm for simulating jointed rock masses' discontinuous deformation. While its reinforcement simulation is only limited to end-anchorage bolt, which is assumed to be a linear spring simply. Here, several new reinforcement modes in DDARF are proposed, including lining reinforcement, full-length anchorage bolt and equivalent reinforcement. In the numerical simulation, lining part is assigned higher mechanical strength than surrounding rock masses, it may include multiple virtual joints or not, depending on projects. There must be no embedding or stretching between lining blocks and surrounding blocks. To realize simulation of the full-length anchorage bolt, at every discontinuity passed through the bolt, a set of normal and tangential spring needs to be added along the bolt's axial and tangential direction. Thus, bolt's axial force, shearing force and full-length anchorage effect are all realized synchronously. And, failure criterions of anchorage effect are established for different failure modes. In the meantime, from the perspective of improving surrounding rock masses' overall strength, a new equivalent and tentative simulation method is proposed, it can save calculation storage and improve efficiency. Along the text, simulation algorithms and applications of these new reinforcement modes in DDARF are given.

• 한국지반공학회논문집
• /
• 제37권2호
• /
• pp.33-48
• /
• 2021

현수교의 지중정착식 앵커리지는 기초 암반이 신선할 경우에 적용될 수 있는 형식으로, 앵커리지 형식 중 환경성과 경제성 측면에서 뚜렷한 장점이 있다. 그러나 케이블 하중 재하시 암반의 거동특성이 아직 명확하게 규명되지 않았고 설계기법이 정립되어 있지 않아, 실무자들이 구조물 계획을 수립하는데 많은 어려움을 겪고 있다. 본 연구에서는 국내 도서지역의 경암 지반에 계획된 지중정착식 앵커리지를 대상으로 모형실험과 수치해석을 수행하고 지지암반의 거동 특성을 평가하였으며, 자중과 전단력으로 케이블 하중에 저항하는 비대칭 형태의 암반 쐐기 블록을 제안하였다. 또한 경암 지반에서 강연선 홀 설치를 위한 실규모 시험천공을 실시하고, 경사 천공의 정밀도를 확인하여 지중정착식 앵커리지의 적용 가능성을 평가하였다.

• Geomechanics and Engineering
• /
• 제24권5호
• /
• pp.457-470
• /
• 2021

In this study, the pull-out behavior of a tunnel-type anchorage for suspension bridges was investigated using experimental tests and image processing analyses. The study focused on evaluating the initial failure behavior and failure mode of the tunnel-type anchorage. In order to evaluate the failure mode of tunnel-type anchorage, a series of scaled model tests were conducted based on the prototype anchorage of the Ulsan Grand Bridge. In the model tests, the anchorage body and surrounding rocks were fabricated using a gypsum mixture. The pull-out behavior was investigated under plane strain conditions. The results of the model tests demonstrate that the tunnel-type anchorage underwent a wedge-shaped failure. In addition, the failure mode changed according to the differences in the physical properties of the surrounding rock and the anchorage body and the size of the anchor plate. The size of the anchor plate was found to be an important parameter that determines the failure mode. However, the difference in physical properties between the surrounding rock and the anchorage body did not affect its size. In addition, this study analyzed the initial failure behavior of the tunnel-type anchorage through image analysis and confirmed that the failure was sequentially transferred from the inside of the tunnel to the surrounding rock according to the image analysis. The reasonable failure mode for the design of the tunnel-type anchorage should be wedge-type rather than pull-out type.

• Geomechanics and Engineering
• /
• 제36권1호
• /
• pp.71-81
• /
• 2024

This study analyzes the pull-out behavior of tunnel-type anchorage under various joint conditions, including joint direction, spacing, and position, using a finite element analysis. The validity of the numerical model was evaluated by comparing the results with a small-scaled model test, and the results of the numerical analysis and the small-scaled model test agree very well. The parametric study evaluated the quantitative effects of each influencing factor, such as joint direction, spacing, and position, on the behavior of tunnel-type anchorage using pull-out resistance-displacement curves. The study found that joint direction had a significant effect on the behavior of tunnel-type anchorage, and the pull-out resistance decreased as the displacement level increased from 0.002L to 0.006L (L: anchorage length). It was confirmed that the reduction in pull-out resistance increased as the number of joints in contact with the anchorage body increased and the spacing between the joints decreased. The pull-out behavior of tunnel-type anchorage was thus shown to be significantly influenced by the position and spacing of the rock joints. In addition, it is found that the number of joints through which the anchorage passes, the wider the area where the plastic point occurs, which leads to a decrease in the resistance of the anchorage.

• Geomechanics and Engineering
• /
• 제31권6호
• /
• pp.573-582
• /
• 2022

The geometry of the gravity-type anchorage changes depends on various factors such as the installation location, ground type, and relationship with the upper structure. In particular, the anchorage geometry embedded in the ground is an important design factor because it affects the pull-out resistance of the anchorage. This study examined the effect of four parameters, related to anchorage geometry and embedded ground conditions, on the pull-out resistance in the gravity-type anchorage through two-dimensional finite element analysis, and presented a guide for major design variables. The four parameters include the 1) flight length of the stepped anchorage (m), 2) flight height of the stepped anchorage (n), 3) the anchorage heel height (b), and 4) the thickness of the soil (e). It was found that as the values of m increased and the values of n decreased, the pull-out resistance of the gravity-type anchorage increased. This trend is related to the size of the contact surface between the anchorage and the rock, and it was confirmed that the value of n, which has the largest change rate of the contact surface between the anchorage and the rock, has the greatest effect on the pull-out resistance of the anchorage. Additionally, the most effective design was achieved when the ratio of the step to the bottom of the anchorage (m) was greater than 0.7, and m was found to be an important factor in the pull-out resistance behavior of the anchorage.

• Steel and Composite Structures
• /
• 제17권6호
• /
• pp.791-801
• /
• 2014

The effects of anchor on fractured specimens in splitting test are simulated by DDARF method, the results of which are compared with laboratory test results. They agree well with each other. The paper contents also use the laboratory model test. The main research objects are three kinds of specimens, namely intact specimens, jointed specimens and anchored-jointed specimens. The results showed that with the joint angle increased, the weakening effects of jointed rock mass are more obvious. At these points, the rock bolts' strengthening effects on the specimens have become more significant. There is a significant impact on the failure modes of rock mass by the joint and the anchorage.

• 화약ㆍ발파
• /
• 제37권4호
• /
• pp.26-35
• /
• 2019

타정식 현수교의 중력식 앵커리지를 설계하는 데 있어, 지반과 콘크리트 앵커블록 사이에 작용하는 접촉 마찰력은 교량의 주케이블의 장력을 지지하는데 많은 기여를 하고 있기 때문에 콘크리트와 암반 사이 접촉면의 마찰 및 전단 저항 특성을 이해하는 것이 중요하다. 이를 위해, 본 연구에서는 휴대용 레이저 스캐너를 활용하여 발파 바닥면을 스캐닝하였으며, 이를 바탕으로 3차원 모델링 및 거칠기를 정량적으로 분석하였다. 또한 발파 바닥암반 단면 데이터를 활용하여, 발파 바닥암반-콘크리트 경계면을 갖는 모델을 생성하였다. 동적파괴과정해석기법(DFPA-3D)를 활용하여, 해당 모델에 대한 직접 전단시험 모사를 수행하였으며, 이를 바탕으로 발파 바닥암반-콘크리트 접촉면에 대한 전단파괴 거동을 확인 및 분석하였다.

• 한국조경학회지
• /
• 제27권4호
• /
• pp.59-64
• /
• 1999

This study is about gaining orientation through anchorage act of a group of ferryman. In addition, a point acquisition and character of landmark that is closely realated to a point acquisition would be clarified by studying the form of configuration of the earth and object which is used landmark for anchorage. There are 13 anchorage points in the north part of Pusan harbor. 12 anchorage points are used to anchor. A ferryman let a ship which is temporarily anchoring move safely and speedily at the anchorage point. At that time, he uses landmarks by a technique of Overlay View. Between landmarks and viewer would be formed exquisite location combination. A mountain peak, a peak of island, nature configuration of land such as intermitent rock and location, size and form of buildings or structures of a city were variously appeared as landscape elements which were used landmarks. Looking at conditions to be easily captured as a target object, 1. A particular point of a mountain ridge line which was not shield by buildings. 2. In case objects have similar form, the building which was located in the front or the highest. 3. In case of a singular object, whatever there is physical elements, that would be a target object. Through this study a configuration of the ground such as a mountain peak which is become the background of harbor landscape is very important element to find anchorage point in configuration of the ground and object. So, the continuous preservation of the contour line of mountain is needed to do safe and effective anchorage act.